We draw up a pattern and sew a beautiful and simple bandana. Bandana pattern Do-it-yourself bandana on children's head

The hot summer sun is loved by many, but sometimes it can cause harm: hair burns under its rays, and an uncovered head can get sunstroke. Therefore, hats are no less relevant in summer than in winter. The most versatile is a bandana, which is easy to sew yourself.

To create a bandana with your own hands, you need to determine what kind of bandana it will be. Even this headdress has several versions. The simplest is a medium-sized square scarf, tied on the head and having a knot below the back of the head.

For such a bandana, patterns with complex patterns are not required - just choose an attractive piece of fabric, make a square with the required dimensions, trim the edges, and the headdress is ready. The classic parameters for a square bandana are 63*63 and 70*70 cm.

As for the choice of material, there are no clear recommendations. Today, bandanas are not only a sign of belonging to certain subcultures (bikers), but also an accessory that is on the list of fashion trends. Therefore, they can be made from almost any material, including fur. For the summer it is worth choosing natural silk: it does not overheat the head and does not slip off the hair. Cotton is also good in this regard. And for cooler weather, you can turn to knitwear, jersey, or even leather and wool. Knitted bandanas, which look interesting during the off-season, are also in demand.

In addition to the classic square pattern, a bandana can be created from separate pieces of fabric: for example, a rectangle with a ribbon, a cap with ends for tying at the back, or a wide headband with a ribbon. Those. The main feature of a bandana is not its shape, but the ability to tie it, since the name of the headdress comes from the Spanish verb meaning “to tie.” Moreover, the original version of the bandana was tied at the back 2 fingers above the eyebrow line, with the free edge of the product tucked under the knot. And today he has moved to the lower hairline at the neck, which is in many ways more convenient. A bandana tied in pin-up style is a 100% fashionable accessory that has no protective functions. However, this does not make it lose its charm, and every woman should have one in her wardrobe.

DIY knitted bandana

Crochet bandana is an interesting headdress for women for the cold season. It can be made from any dense yarn, preferably containing wool. Approximately 100 g of it is consumed, but it depends on the expected size. Professionals recommend using hook No. 3 for work.

To find out the dimensions by which orientation will be carried out, the head circumference is measured. The radius of the circle shown in the diagram will be 0.25 of this value. You should start knitting with 6-8 loops, for each new row you remove 2 loops from 1. When the circle in diameter is 10-12 cm, rows with and without increases begin to alternate. After 12 cm in length from the center of the bandana cap, it is necessary to follow the turning knitting pattern, spreading the halves of the headdress, between which a slit will appear. On each side, a chain 20 cm long and 4-5 cm wide is created - they will become the ends for further tying. The edge is tied with a “crawfish step”.

A crocheted summer bandana may look more airy, the threads chosen for it are no longer so thick. And here you can resort to a different scheme, making a headdress of 2 semicircles, a long transverse ribbon and a middle strip. Here you will also need the head circumference value, but now you will need to calculate the radii of the semicircles and the size of the middle stripe. The latter is determined by eye, based on personal wishes. The optimal size for her will be 12-14 cm. Then the radius of the semicircles will be equal to the size of the head circumference, from which the width of the middle stripe is subtracted, and the resulting value is divided by 4.

Knitting semicircles is also done with 6-8 loops, the pattern is chosen arbitrarily: you can go with the simplest pattern, adding a loop to each row. Or you can knit from 1 loop 2 or 3 at once, in the next step, on the contrary, connecting 2 loops into 1 to get an openwork knitting. However, it is important to remember that the shape of the pattern is a semicircle, so the expansion must be present one way or another.

It is recommended to make the middle strip in the form of a long rectangle with the same pattern as the semicircles. The elements are connected using simple single crochets. After that, tying begins along the bottom, often using an elastic band or other tight knitting method, creating long chains (15-20 cm) that are located at the back.

Bandana for a boy: pattern and step-by-step instructions

For a small child, a bandana for the summer is a more comfortable headdress than a Panama hat. It can be made either by crochet, according to the previously discussed pattern, or from textiles. Whether it is oriented towards a boy or a girl does not matter: the pattern of the bandana remains the same. It is important to choose a thin fabric, width and length no less than 50 by 40 cm, soft linen elastic 3-4 cm wide and 17-20 cm long. You will also need sewing tools: needles, chalk, threads, scissors and pins .

This bandana will have 3 components. It is formed from a wide rectangle, which is the main part, and a narrow ribbon, represented by a pre-prepared elastic band, which becomes the element that secures the bandana on the child’s head. It is enough just to cover the elastic with fabric, that same 3rd detail, so that its appearance fits into the overall color of the product. The edges of the elastic must be secured with a simple fine stitch. There is a little more work on the main part.

When cutting out a rectangle, it is important not to forget about the seam allowance on the outer sides: 1-1.5 cm is enough for this if the fabric is not loose. After this, the edges are processed with an overlocker or on a regular machine by folding them and zigzag stitching. It is definitely worth ironing the part at this stage so that distortions do not occur later.

Now you need to move on to the moment of assembly: turning both the large rectangle and the ribbon with an elastic band, the short side towards you, you should put them on top of each other. This is done so that the strip with an elastic band runs along the long side of the main part, and their corners are aligned. Here it is advisable to fix the parts together with pins, after which the edge of the main part is folded. The wrong side of it faces up, the strip with an elastic band is between the layers. The opposite long edge needs to be placed with the front side on top of the wrong side of the edge that is connected to the elastic band.

The last point with this side is that an “accordion” begins to be assembled from each edge from the free part of the main part. It is important to do it evenly so that on each side of the elastic you get the same number of folds-layers. After which they are carefully stitched by hand - the needle of the machine will not take such a thick layer. The whole procedure is repeated for the other end of the elastic band. Finally, just turn the bandana right side out.

Pattern of a bandana with a visor

A bandana with a visor protects not only the head, but also the eyes from the sun’s rays, which is important for all ages. Its pattern is not much more complicated than the previous options, so even a novice seamstress can cope with this task. There will again be 3 parts: the visor, the transverse line, which is the ties, and the main panel. Each is single-layer, excluding the visor: for density it should be sewn from 2 layers of fabric.

The selected material is folded in half, and each part is applied in the place indicated by the dotted line on the pattern to the fold line. The outline is done with chalk or, if the fabric is light, then with a pencil. Be sure to cut with a small (1-2 cm) seam allowance at the junction of the parts. The edges of the parts should be processed using an overlocker or a zigzag stitch. The middle zone and the transverse part are basted and sewn on a machine with fine stitching.

After this, the halves of the visor are folded with their right sides on top of each other and connected, but the seam is not cyclic: it is necessary to leave space to turn the part out. It makes the most sense to do this on the side that will be attached in the next step to the transverse line of the bandana, sewing with it. This completes the sewing according to this pattern. If necessary, you can make a more dense headdress by initially cutting out a double for each part and sewing them together, as was done with the visor.

Hello to all lovers of lightweight headwear such as a biker bandana!

For boys, such a scarf for the summer is just what the doctor ordered. You can (and should) build and cut it yourself.

For the laziest, here are two ready-made patterns for quick cutting. sizes 50-52 and 55-56.

But try to build it yourself - it won’t take much time. You will need two measurements: - Head circumference OG

Bandana depth GB

In the video tutorial I explain in detail how to take measurements and make a pattern yourself. Here is a construction diagram for clarity:

and this is a video tutorial with the most detailed explanation of the clean execution of all the knots of the bandana.

Have a wonderful summer everyone, healthy boys.

Beautiful bandanas for your men!

More articles on the topic

angel-a-dress.ru

DIY men's, women's and children's head bandanas

Bandana is a universal headdress that suits almost everyone. Initially, it was used to protect the face and head from sand and the scorching sun. Nowadays, it is not just a headdress, but also a fashion accessory. You can choose a bandana to suit every taste, in different colors and from any materials. Or you can sew it yourself.

Types of bandanas

• Classic. Square made of cotton fabric. Both men's and women's are worn on the head in the same way. A feminine and practical option in the form of a narrow hoop that supports your hair. Which is very convenient during windy times.
• Transformer. At the back of the head it is gathered with an elastic band; the upper part can be unfolded like a hood.
• Bandana with ties.
• Bandana buff or trumpet. A universal bandage made of elastic material, popular among athletes. Can be used as a headband, scarf or face mask.

There are many ways to tie a scarf. For the classic one, you just need to fold the scarf into a triangle, throw it loosely over your head and tie it with a knot at the back of your head.

In retro style. It is folded into a triangle, but the base of the scarf is located at the back of the head. The edges of the scarf are tied on top of the head, the tail is hidden in a knot.

Pirate version. A bandana folded into a triangle is applied with the base to the forehead close to the eyebrows. The ends are wrapped around the head and tied. Boys like this option. Female version of "pirates". A scarf folded into a triangle, but with the base of the scarf placed on the side near the ear. Tie the loose ends on the opposite side, forming a loose knot.

In addition to traditional methods, a bandana can be tied as a wristband. Fold the scarf several times until you get a tight rectangle and wear it on your wrist.

Around the neck like a cowboy. Fold the scarf into a triangle, placing the ends behind the neck. Make a small crease at the base of the triangle under the neck.

How to sew a classic bandana

The universal and most popular version of the headdress, which is preferred by men, is suitable for both women and children. The measurement for construction is the head circumference, enclosed in a square. Classic sizes for children are 50x50 cm, for adults 60x60 cm. And 70x70 cm for large sizes.

• Square of fabric of the required size +1 cm per hem.
• Scissors.
• Pins, needles and threads.

That's all you need to make a classic headband. Fold the edges evenly around the perimeter of the prepared cut, forming a closed edge. Baste and stitch on a sewing machine. You can wear such a bandana not only on your head, but also use it as protection for your face, on your arm, and even on your jeans.

How to sew a women's bandana with an elastic band

The main measurement is head circumference. The bandana pattern is made of two parts: the main part is 38 by 18 cm and the strip is 28 by 10 cm.

Hem the strip on the narrow side by 1 cm. Fold it face down, sew the long edge and turn it right side out. Insert an elastic band into the resulting ribbon. Its length should be 2 times shorter than the strip itself. Using several stitches, secure the elastic band in the ribbon.

Fold the main part like an accordion. Place the edge in a pre-sewn ribbon. Do the same with the other side. Machine stitch these edges. Women's bandana is ready! Made from light, bright fabrics, it will go perfectly with denim outfits and summer sundresses.

How to make a pirate bandana from a T-shirt

It’s easy to sew a bandana for a boy from a boring T-shirt. Cut a square from the prepared material, as for a classic scarf. Decorate with pirate symbols.

A more difficult option for a little pirate under 1 year old. To create a pattern you will need two measurements. Head circumference OG and length from ear to ear YU. In the example, the values ​​used are Head Circumference (HC) equal to 50 cm and Length from Ear to Ear (EL) 34 cm.

The pattern consists of three parts

The cut out parts are sewn together in order. Sidewalls with a central part. Fold the tie part in half and attach it to the finished base of the bandana so that part of the base is hidden under them. Pin, baste and stitch. Decorate with pirate symbols or whatever the little mischief wants. Using the same principle, you can sew a headdress for a girl with a visor. Pre-glue the parts of the visor with non-woven fleece for density.

How to make a bandana-buff from knitwear

How to sew a buff bandana for sports and everyday wear? It's not difficult at all. This model can be sewn even from a boring T-shirt. For children the dimensions are 24 by 40 cm, for an adult 50 by 26 cm. To make it you will need a little more than a meter of fabric. Cut a rectangle twice the size shown. Fold in half and machine stitch. You can pre-process the edges with an overlocker. Made from warm material, this model will protect your face from frost and wind. And it won’t take long to persuade children to put on such an original hat.

A T-shirt would also make a great bandana for a girl. Cut two rectangles from the prepared material. Large for the base of the scarf 30 by 45 cm and smaller for the strap 8 by 10 cm. Gather the large rectangle on the short sides with a thread and tighten, reducing it in this way to 3 cm. On the second piece on the narrow sides, mark the middle with chalk. Allow seam allowances of about 1 cm along the perimeter. Align both blanks on the right side, secure with pins and stitch. Insert an elastic band into the placket and sew it with a hidden seam.

From the proposed options it is clear that making a bandana does not require expensive materials, special skills or a lot of time. For children it is worth choosing natural fabrics. Cotton, calico or chintz work well. Before sewing, the fabric should be washed so that it shrinks naturally. Men's and women's models can be made of knitwear, denim and even leather.

Attention, TODAY only!

1igolka.com

step-by-step instructions, pattern and reviews

Original accessories have always been in fashion. With a bandana, for example, you can complement your look and add some zest to your clothing style. You will learn how to sew a bandana and select decorative elements for it in this article.

How to wear a bandana on your head?

A bandana is a unique accessory that can be combined with different styles of clothing. Today it is fashionable to wear this headdress in different ways. This accessory is popular among girls and young boys.

There are several options for how you can wear a bandana:

1. Classic option. You need to fold the scarf diagonally, you will get a triangular scarf, which you need to place on the top of your head, and tie the ends at the back.
2. In hip-hop style. You should fold the bandana into a triangle and roll it into a rectangular strip. We place the finished bandage on the forehead and secure it at the back with a double knot.
3. Elegant option. We form a thin bandage from the scarf, collect the hair in a bun and make a high ponytail, wrap the bandana around the hairstyle and carefully secure the fabric with bobby pins.
4. East style. Take a large scarf, fold it in half and place it at the back of your head, then bring in the loose edges and tie a knot at the top of your head. Throw the remaining fabric forward and form a turban.
5. Retro option. Fold the scarf in half and form a strip 2.5 cm wide. Place the bandage at the hairline so that its ends are at the top, and carefully tie it into a knot.

How to wear a bandana around your neck

A bandana is worn not only on the head - many people also use it as a scarf, bracelet or hair decoration. Anyone can sew a bandana with their own hands; to decorate your images, you need to have many accessories that differ in style and color.

There are several methods on how to properly wear a bandana around your neck:

1. Cowboy method. You need to fold the scarf in half diagonally, place it around your neck so that the sharp triangle is in front and carefully tie the ends at the back into a knot. Spread the fabric of the bandana in front so that the folds lie evenly.
2. Knot in the form of a tie. To do this, you need to wrap a bandana folded diagonally around your neck (its ends should be directed forward) and place them on top of each other. Form two loops from the ends and pass one loop through the second. Now carefully straighten the knot so that the second loop completely covers the first.
3. Square method. Take a bandana and put it around your neck. The ends should be in front. One of them should be slightly longer than the second. Cross the ends to form a loop. Then pull the longer end of the bandana through this and carefully tuck it into the knot.

Bandana - decoration of your image

If you understand how to make your own bandanas, you can also shape them into beautiful bracelets. According to reviews, this type of decoration looks very original and gives your appearance a touch of rebellion. To create it, a small scarf is suitable, which needs to be wrapped around the wrist - plain bandanas are ideal, but it is better to choose a bright color: red, raspberry or blue.

As the masters say, to make a bracelet from a bandana, first you need to fold the scarf into a triangle and roll it into a thin strip, 2-3 cm wide. Then place your hand in the middle of the strip and wrap the latter around your wrist. Tie the ends in a knot and carefully tuck them under the knot. The bracelet should not be too tight; the folds of the product should fit easily on the hand.

You can also use bandanas to decorate hats, creating stripes of different widths and colors, forming voluminous bows and elegant knots on them.

Bandana models

To understand how to sew a bandana, you need to know what types of scarves there are, what material they are made of, and what they can be used to decorate them with. Every year, modern designers never cease to delight us with a wide range of these accessories, differing in style, color and material.

Today there are several models of bandanas:

1. Kerchief.
2. Bandana with ties.
3. Bando.
4. Accordion bandana.
5. Transformable scarf.
6. Bandana with visor.

They will be the perfect addition to your everyday or holiday outfit.

DIY bandana

Even the most boring outfit can be decorated in the blink of an eye with an openwork scarf, beautifully tied on the head. How to sew a bandana for yourself and surprise everyone around you?

To create an original accessory you need to have:

• 1 m satin;
• soap;
• ruler;
• matching threads;
• scissors;
• sewing machine

According to reviews, even for beginners who want to understand how to sew a bandana, the pattern of this accessory will not be difficult:

1. Take the silk and flatten it on a flat surface.
2. Using a ruler and soap, draw a 50 by 50 cm square.
3. Then take scissors and cut it out.
4. Using chalk, mark the width of the hem allowance (1-2 cm).
5. Turn up the seam allowances and iron the fabric.
6. Now baste the pattern and stitch it on the machine.
7. The basting threads should be pulled out, and the seams should be neat and even.

The bandana can be decorated with thermal rhinestones, large stones, ribbons, bows and stripes.

How to sew a bandana for a boy

The pattern of this headdress will also not present any difficulty. You just need to decide on the size. Use a measuring tape to measure the circumference of your child's head.

To sew a bandana with an elastic band you will need the following sewing supplies:

• 1 m of fabric;
• scissors;
• thick paper;
• pencil;
• centimeter;
• tailor's pins;
• matching threads;
• sewing machine.

We present step-by-step instructions on how to sew a bandana with your own hands. Patterns are built like this:

1. Take paper and use a pencil to draw a rectangle for the scarf, with sides 24 x 40 cm.
2. We need the second rectangle for the elastic; its dimensions are 5 x 26 cm.
3. Now we cut out the details and transfer them to the fabric.
4. Before cutting out the bandana patterns, be sure to leave 1 cm from the edge of the pieces.
5. Place the end into a double folded drawstring under the elastic.
6. Now secure it in this form with tailor's pins and baste.
7. Sew one end of the product using a machine. We repeat the same procedure with the second end of the scarf.
8. Turn out the elastic drawstring and machine a seam 10 mm from the fold, stretching the elastic along its entire length.
9. Fold the sections inside the drawstring and carefully sew up the hole. The bandana is ready!

As mothers say, a bright bandana becomes an indispensable protective accessory for a boy in the heat and a stylish piece of clothing on cooler days.

fb.ru

Bandana pattern, sew a beautiful accessory with your own hands

A bandana is a simple piece of fabric with a pattern (or plain color), a headdress for protection from the sun. Initially, a square scarf was used to protect the face from dust and smoke. Centuries later, the bandana has become a fashion accessory that even celebrities do not disdain.

History of the headscarf

The name "bandana" was borrowed from Hindi; this word was used to describe chintz with a paisley pattern that was widely used in the past.

Bandanas were worn by farmers, pirates, cowboys and railroad workers. A scarf was tied around the head or neck; it was convenient for wiping away sweat and protecting the respiratory tract from debris and strong winds. The bandana was often used as a homemade duffel bag or knapsack.

The headscarf received a second life during the heyday of gangster groups in North America in the 80s of the 20th century. With its help, it was customary to emphasize one’s belonging to one or another street gang. The headscarf was also popularized by rap singers. Nowadays, a bandana is a fashionable accessory that can highlight the individuality of its owner.

Headscarves for fashionistas are embroidered with precious and semi-precious stones, sequins and jewelry beads. Bandanas made from the fur of various animals are expensive and in demand in many countries.

Making a bandana pattern

You can easily and quickly sew a remarkable scarf yourself. To do this, you only need to choose a fabric of a suitable size with an interesting pattern. The bandana pattern is so simple that it’s not worth talking about it again.

The standard size of a headscarf for an adult is 61 cm by 61 cm. It is very easy to choose a more precise size; you need to measure the circumference of the person’s head. Let's say you need to sew a scarf for a child with a head circumference of 55 cm. Let's apply a simple formula from a school geometry course on calculating the diagonal of a square. The required minimum length for the bandana pattern will be 55 / 1.414 (square root of two) = 38.1 cm.

To make a bandana with your own hands, the pattern should be drawn according to individual sizes. To the resulting value you need to add a few more centimeters for allowances and a fixing “tail”.

The selected piece of fabric for the bandana pattern should be spread on the work table. Using tailor's chalk and a ruler, mark the required length and width on the fabric. The result should be a perfect square with allowance marks. If you can use an overlocker when sewing and process the edges of the bandana with it, allowances will not be needed.

Sew a bandana pattern

Some tips:

1. It is worth making sure that the calculations are correct, fold the workpiece diagonally and arrange the first fitting.
2. When making a bandana with your own hands, it is better to process the pattern using a sewing machine or overlocker. Hand stitching will not look nice and neat.
3. The workpiece must be cut evenly and carefully; the final appearance of the product will depend on this.

Sewing a bandana, the pattern of which is described above, is very easy. To do this, the scarf seams need to be folded along the marked lines, fastened with sewing pins or basted and ironed. Then the sections should be processed with a closed edging seam.

Bandanas for babies

A headscarf can become an indispensable accessory for kids. A scarf is more comfortable for a child than a Panama hat or a baseball cap. The bandana does not block the view and sits tightly on the head, does not fall off or get in the way.

A bandana for children can be used not only as a headdress, but also as a neckerchief - a bib. This is a truly irreplaceable and multifunctional item in the wardrobe of every little fashionista.

MK cutting and sewing a scarf for kids

Making a bandana pattern for a boy is more difficult than for an adult. The scarf will require two pieces of fabric. Both materials should be soft, natural and absorb moisture well.

The scarf for a child does not look like a square, but like a triangle with buttons and fasteners along the edges.

You should attach the pattern to the folded material and carefully cut it out. Repeat the steps for cutting the second fabric.

You need to fold the parts with the right sides inward and “bait” them with thread or fasten the parts with pins. Then sew the bandana along the edges using a sewing machine, leaving the seam a little short.

Turn the scarf right side out through the remaining hole. If difficulties arise, you should use a pencil or thin stick. Having straightened the corners, you should iron the bandana and carefully finish the seam from the front side.

To install the button you will need special pliers. They are sold in any craft store and the packaging contains detailed instructions for their use. In the same department you can purchase buttons for clothes themselves.

It’s very easy to decorate the product using decals in the form of animals or cartoon characters. Such applications are applied to the fabric with the adhesive layer down, covered with damp gauze or a cotton scarf and heated with an iron for 30 seconds. For stylization, you can embroider a monogram or a whole design on a scarf.

fb.ru

Master class - DIY bandana with a visor | Hats

Of course, you can simply buy a bandana with a visor. The number of offers in the same online stores exceeds all reasonable limits. But making a bandana with a visor with your own hands is much more interesting. And if you use something that has fallen into disrepair, or just a boring thing, as a donor, it will be pure customization. Hello, dear readers of the cutting and sewing site ideaport.ru - “Sewing Circle”. The material “Master class on a bandana with a visor with your own hands” echoes the master class on cutting and sewing budenovka.

These master classes (bandana with a visor - budenovka) have something in common primarily in the sequence of presentation of the material. In addition, the materials used. In both cases, this is used cotton fabric. Well, because these hats are a wonderful gift! This determined the style of the bandana. It is a bandana with a visor that is most practical in terms of its use. There are simple rectangular scarves, which, when tied in a certain way, can already be called gangs. There are complex structures in the form of turbans. Yes, yes, a turban is also a bandana. Bandanas are worn tied around the arms. Dogs wear bandanas. Babies have bandanas, they are bibs. Cowboys sewed bandanas on as bandages to protect their lungs from dust... Bandanas are knitted, felted, and, of course, sewn. From knitwear, denim, leather... You can cut out a bandana with a visor directly on the fabric. But when sewing another one, you will have to draw everything again. Therefore, it is easier to have its patterns. The most interesting way to draw patterns is in the “Valentine” pattern making program. On the resource ideaport.ru the program itself for clothing patterns can be downloaded for free using the links in the articles:

1. Pattern making program v5 for XP, Vista
2. New release of the program for creating Valentine patterns
3. Program for creating Valentine's patterns
4. Finished pattern of a bandana with a visor

Or find it through a search on the site.

The chosen version of the bandana, with a visor, is very easy to sew. Even easier than cutting and sewing zouaves...?

We cut a bandana with a visor

The pattern of a bandana with a visor is not parametric, unlike the pattern of a budenovka. The parameters of a bandana with a visor will be determined by the person who will wear it. The adjustment is determined by the knotting. Let's change the dimensional characteristics shown in the example figure a little.

The program for creating patterns has been downloaded, installed, and launched.

We cut the head of the bandana

Using the “New” button we create a “bandana head” pattern.

Using the “Point at end of segment” tool, draw a line from point A to the right. The length of the line is 60 centimeters. Line type "Dotted".

Using the “Point at end of segment” tool, draw a line from point A upwards. The line length is 20 centimeters. Line type "Dotted".

Using the “Point at end of segment” tool, draw a line from point A2 to the right. The length of the line is 10 centimeters. Line type "Dotted".

The work with constructing points is completed. If you hold down the Shift key while constructing, then the angle can be constructed fixedly. It's comfortable. You can read about some techniques for working in the “Valentina” pattern making program in the workshop.

Using the “Simple Curve” tool we connect points A - A3. Manipulating dimensional markers. There are two of them and they determine the appearance of the line.

Using the same “Simple Curve” tool we connect points A3 - A1. Use markers to change the shape of the curve.

Using the “Line between points” tool we connect points A1 - A. The pattern of the bandana head with a visor is ready. But not really. Only rendering has been done. Now in the pattern making program you need to design the part directly. A tool called “Detail” is used. It is located in the group of tools with the same name. The selection of the contour is carried out by a simple mouse click. If the lines were built taking into account one direction, then there are no problems. If the direction is different, then Shift is used when selecting lines as part of the contour. There is always a story at the bottom of the program window.

After pressing Enter, the part properties window will appear. Tabs will not be available. Or rather, the tabs will be accessible, but the details located on them will not.

If you simply click on “Ok” and right-click to call up the context menu in this pattern creation program, then in the “Options” item the situation will change dramatically. Details will be available. On the “Increase for seams” tab, set an increase in size of 1 cm. Click OK. The program will complete the increase and mark it with a gradient of gray dots.

We cut the visor of the bandana

We are building a canopy. To do this, we create another pattern in the “Valentine” pattern making program. We call it “Bandana Visor”. Point B will appear, from which the pattern of the bandana visor will be built.

Let's modify the visor, which is given in the original drawing. Let's make it not adjacent, but on the fly. Let's take the Budenovka visor as a basis. Let's construct point B1 at a distance of 20 cm from point B.

Let's measure the middle of the segment B-B1 using the “Midpoint between two points” tool. Point B2 will appear

From point B2 we will construct point B3

Let's build point B4

Using the Simple Curve tool we will draw a visor. Don't forget about the direction of drawing lines. It will be easier to construct parts in this pattern creation program if the lines are drawn in one direction. For example, clockwise.

By analogy with the head of the bandana, we also set the allowance for the visor. The pattern for the bandana with a visor is ready. It remains to be printed.

Pattern printing

To print a pattern for a bandana with a visor, use the mode for creating a layout of parts. It becomes available if there is at least one drawn detail. The layout can be exported to a file. This may be necessary if you have the option of printing outside your home. For example, in an advertising agency located on the other side of the city, which has a printing tool such as a plotter.

Often the patterns are large and you will have to manipulate the sheet format to fit them.

The patterns are laid out. It's time to print them out. The easiest way to do this is through “File” → “Layout” → “Save Tiled as PDF”. The result will be a PDF file with a pattern for a bandana with a visor. We do not print blank sheets. We glue the printed ones together. In order not to get confused, the program for clothing patterns will number the sheets and indicate the edges that need to be cut.

Cut it out

We cut out the details along the very edge of the patterns. After all, the allowances have already been taken into account.

Assembling a bandana with a visor

Assembling the head

Let's connect the parts of the head by folding them right sides together and stitching them together. The length of the stitched part is about 30 centimeters. A bandana with a visor must be tied. We will temporarily connect the parts using office clips. We put fastenings at the beginning and at the end of the line.

Let's overlay the cuts. Until the end of the line. There is a notch at the end of the line. After this, only one part will be overlaid.

We sew the seam with double stitching. This bandana with a visor is made of denim.

At the end of the line connecting the parts, we place a solid bartack across the seam.

We set off the second half.

Double stitching.

A bandana with a visor is sewn as a gift. A gift for a person with a sense of humor. Therefore, light banter is only beneficial.

Assembling the visor

We sew together the details of the visor.

We cut out triangles to make laying out and stitching easier.

Having formed a roll, we stitch the visor to the edge. At the same time, for strength, we will stitch the visor of the bandana.

Let's mark the middle of the part.

Collecting a bandana

Fold the head of the bandana and its visor, matching the stitching of the head and the mark on the visor. Let's strengthen it temporarily. Let's compose.

Tacks are required.

We overlay the lower cut of the head together with the visor.

Let's stitch this seam too. Double stitching.

Result

See you soon on the pages of the cutting and sewing website ideaport.ru - “Sewing Circle”.

To main

ideaport.ru

for women or for men, for boys or girls, pattern

There are many different hats for both men and women. Most people know what a hat or scarf is, but few have heard of such a headdress as a bandana. This item can be worn in different ways, and you can choose the color to suit you. A bandana is a large scarf or scarf. You can wear it on your forehead, head or neck. This item is universal; women, men and children can wear it. You can read about how to make a bandana on your head with your own hands on various websites, or you can find a video that will show a master class on making a bandana.

The first way you can make a bandana is to tie a scarf. More often than not, such a bandana is suitable for a man, but it is universal, so everyone can wear it. In order to make a bandana, you just need to take a scarf measuring 50 cm in width and 50 cm in length, that is, a square. And you can tie it as convenient and beautiful as possible.

You can find not squares, but triangles of fabric; they can also be used as a headdress. It is very good to wear such bandanas in the summer, as they protect from the sun. But there are other ways to use a bandana, such as wearing it on your arm or neck.

Another type of bandanas will allow you to make hats that will suit all family members. For a girl, a bandana with a visor and ties is suitable. Such protection will look elegant, while protecting the child's head. In order to sew such a bandana, you need to measure the volume of your head and cut off the required piece of fabric, and separately cut out the visor for the bandana and sew it to the edges of the fabric.

You can do the same thing for a boy, but without a visor. They also very often use pirate signs on such things, which is very popular with robber boys. The bandana is made in the same way, the volume of the head is measured and the required piece of fabric is cut out, and then hemmed with a sewing machine. But in this case there is no need to sew on the visor.

In all cases, the bandana pattern may differ, it can even be made from different colors. For example, the main part is white, and the visor is gray.

A women's bandana is a regular scarf, but there are girls who prefer to wear men's bandanas, so it all depends on the girl's taste. You can sew a headdress with your own hands, but for this you will still need a mock-up of the bandana.

In order to sew a bandana with an elastic band, you need to leave holes for it, you can also use lace or ties. This version of the bandana will serve well as beach sun protection.

For everyday wear, girls can sew a block of wood or a turban. The difference between a turban and a bandana is that the turban is wrapped around the head in several layers of fabric, and a skullcap or fez is also placed under it. Many different patterns for sewing this headdress can be found in sewing magazines or on Internet sites.

There is such a thing as a buff. It is also a bandana, but it can also be pulled over the mouth. This is an ideal option for the winter, because then not only your head will be warm, but also most of your face. It is clear that it will be difficult to knit such a thing with knitting needles, and knitted fabrics are mainly used for such a thing.

The buff is presented in the form of a tube made of the desired material, which is worn around the neck and stretches upward, and can cover the area of ​​the face, right down to the eyes. When making such a bandana at home, there may be a seam left when sewing the material, it must be hidden inside, but it is better to use a machine, since it can have a rough appearance by hand.

There is a type of bandana that can be crocheted, they are called nemes. This type of headdress is very rarely used in everyday life, since it is a fabric scarf that is woven into knots at the back. This type of headdress was popular in Ancient Egypt and was a sign of power. Of course, in modern life people don’t wear such bandanas, but if you suddenly want to do something unusual, you can sew one.

There are many types of bandanas, so it all depends on taste and the purpose for which the bandana is needed. Basically, everyone can wear them, regardless of gender and age. Knitting such a thing will require time and patience, since at first there may be some problems with the patterns, especially if a beginner has taken up knitting.

In any case, such a headdress can be purchased in stores or made to order with the desired image on the bandana.

You can see many rockers with such bandanas, they use them both as a headdress and as an armband. Therefore, you can safely present such a gift if you have no idea what you can give to a person.

For a very young child, you can sew a bandana yourself, and it will be a very good helper for walks on a hot day.

Video on the topic of the article

webdiana.ru

DIY elastic bandana

After spring comes hot summer, and you need to take care of hats that protect your head from the sun's rays. It is convenient to relax at the sea or by the river in a bandana - you can sunbathe and swim in it without fear of sunstroke. Sewing a bandana is easy.

Materials and tools for the master class "Bandana with an elastic band"

natural cotton fabric, elastic; thread, scissors, two safety pins.

Instructions:

1. Cut out a large rectangle measuring 27 x 45 cm from fabric.

2. Now cut out a small rectangle measuring 8 x 20 cm.

3. Take two identical pieces of elastic, each 13 cm long.

4. On a large rectangle, fold and stitch the long sides.

5. Smooth it out with an iron.

On the short sides of the large rectangle we will place several counter folds and stitch them together using a sewing machine.

6. This is what a large rectangle with folds looks like.

7. Take a small rectangle, fold it in half with the wrong side out and sew it.

8. Turn the small rectangle inside out and make a stitch in the middle - we will have two compartments into which we can insert an elastic band.

9. Insert an elastic band into each compartment. First, we’ll stitch one edge so that the elastic is fixed, and then we’ll tighten the elastic a little and stitch them on the other edge.

10. Sew a small rectangle with a large rectangle as shown in the photo.

How to sew a cap for a flight attendant

Materials and tools for the master class "Bandana with an elastic band"

natural cotton fabric, elastic; thread, scissors, two safety pins.

1. Cut out a large rectangle measuring 27 x 45 cm from fabric.

2. Now cut out a small rectangle measuring 8 x 20 cm.

3. Take two identical pieces of elastic, each 13 cm long.

4. On a large rectangle, fold and stitch the long sides.

5. Smooth it out with an iron.

On the short sides of the large rectangle we will place several counter folds and stitch them together using a sewing machine.

6. This is what a large rectangle with folds looks like.

7. Take a small rectangle, fold it in half with the wrong side out and sew it.

8. Turn the small rectangle inside out and make a stitch in the middle - we will have two compartments into which we can insert an elastic band.

9. Insert an elastic band into each compartment. First, we’ll stitch one edge so that the elastic is fixed, and then we’ll tighten the elastic a little and stitch them on the other edge.

10. Sew a small rectangle with a large rectangle as shown in the photo.

11. Turn the bandana inside out and straighten it.

Summer bandana is ready. This bandana is designed for a head volume of 54-56 cm. That is, it is suitable for girls aged 10 years and older. The size can be adjusted by cutting out smaller or larger rectangles.

It is better to choose light-colored fabric for a bandana so that it reflects the sun's rays.

On summer days, the bandana is one of the most popular headwear due to the variety of fabrics, versatility and practicality; even on cold days, many people choose warm bandanas instead of hats. A bandana looks beautiful on any head and suits everyone. It is worn by both young people and adults, it all depends on the material and decorations. This is also a stylish accessory, but only a handmade bandana will reflect your personality and be unique. In addition, sewing it is not at all difficult; even beginners can handle it. Let's tell you in more detail how to do this.

Fabric selection

Any cotton or linen fabric, dense and elastic, such as calico, chintz or cambric, is ideal. In the summer, a bandana made of such material will be comfortable, your head will not be hot, it will not sweat, and the bandana itself will be durable and will last for many years. But other fabrics can also be used. Synthetic fabrics are suitable if you do not wear the product every day, but it is still advisable to give preference to natural materials. Silk, chiffon and other thin fabrics are least suitable, but if desired, you can sew from them.

When choosing fabric for a bandana, pay attention to the color. Headbands made from denim and camouflage fabric look stylish and bright. The color of the bandana should be combined with the color of the top of the clothing, and bandanas with beautiful patterns are especially fashionable now; take this into account when choosing fabric.

Don’t forget about the bandana when choosing a headdress for autumn and winter; in this case, thick fleece would be ideal as a fabric.

Sewing a bandana

For sewing, you will need a piece of selected fabric measuring at least 40 by 90 centimeters. Prepare a paper pattern using the drawing below (this will be easy if you have graph paper).

Transfer the pattern to the fabric, do not forget to mark points for stitching 1 and 2. Having received two parts from the fabric, combine points 1 and 2, after unfolding the pattern, do this on both the visible and mirror sides of the pattern, and then machine stitch the seam (from point 2 to point 1 and then to the mirror image of point 2). The pattern already provides for seam allowances of 5 mm.

All that remains is to process the edges, giving the product a finished look. It is ideal to overcast them with an overlocker; it gives the signature bandana seam. You can also sew the edges with a zigzag stitch, folding the edges 1 cm or half a centimeter, and sew with a regular stitch. If you have time, you can hem the edges of the fabric with a buttonhole stitch manually; it is most similar to overlocking and looks no worse.

The stitching can be done with contrasting threads to highlight it and make the bandana stylish and unusual.

Decoration

The finished bandana can be further decorated in various ways, but sometimes this is unnecessary. If the fabric of the bandana has an active print or a beautiful bright pattern, it does not need any additional decorations, and a plain bandana can be transformed as follows:

• Applique – you can use ready-made thermal applique, which is attached to the product with an iron and sold in fabric stores, or you can make the applique yourself, sewing on parts from a variety of fabrics. Felt and leather appliqués are often made on hats.
• Thanks to beautiful embroidery, any bandana will look expensive and elegant.
• Decoration with beads, sequins or decorative stones. This bandana will be feminine and elegant.
• Don’t forget about decorative braid and ribbons; sew them along the edge of the bandana, and it will change beyond recognition.
• Lace – ready-made lace can be sewn onto the frontal part.
• Decorative folds - fold the fabric several times by half a centimeter and sew.

Here you have a beautiful and comfortable headdress for all occasions! You are convinced that sewing it with your own hands is not at all difficult. It won't take much time, and you'll get a unique, stylish accessory. Summer bandanas perfectly protect your head from the scorching sun and cool wind, and winter ones – from the cold. Approach the process creatively, and you are guaranteed success!

- This is a summer headdress in the form of a scarf. Very often, children's bandanas are equipped with elastic bands (to make it easier to put on) or visors (for additional eye protection from the sun). The advantage of a bandana is its simplicity. Such a headdress is easy to put on, can be cleaned (washed) without any problems, and is sewn without the slightest problem.

In this article we will talk about how to sew a bandana for a boy or girl at home. Believe me, this is easier to do than it might seem.

DIY children's bandana

To create a bandana with an elastic band according to our pattern you will need:

Please note that the sizes we indicate are designed for a head volume of 52-54cm. If the volume of the child’s head is larger or smaller than stated, the pattern should be adjusted accordingly.

Completing of the work

1. A bandana pattern for a boy (girl) consists of three parts: two rectangles and an elastic band. Since our elastic band is ready, you will only have to cut two rectangles. Please note that on the outside of each part you should leave 1 cm (seam allowance). As a result of the allowance, the dimensions of the main part (larger rectangle) will be 42x26, and the side drawstring part (smaller rectangle) will be 28x7cm.
2. We fold the small rectangle (smaller part) facing inward and pin it together using pins. After this, the part is stitched, with a distance of 1 cm from the edge (in this case, the threads must be secured). If there are excess edges of the seam allowances, they can be trimmed, but keep in mind that the free edge must be at least 5mm.
3. After this, the small rectangle (drawstring) should be turned out and ironed. In this case, it is most convenient to place the seam on the side.
4. Then insert an elastic band into the finished drawstring. To make this as simple as possible, you can use this device:
5. After the elastic is inserted into the drawstring, its edges need to be fixed. The easiest way to do this is to simply sew them together at a distance of about 5 mm from the edge of the fabric.
6. After all the parts are cut and processed, we begin assembling the product. To do this, a large rectangle is placed face down on the drawstring (the raw edge of the rectangle is on the short side of the small part)
7. The second edge of the main part should be placed on top so that the drawstring is inside the “pipe” of a large rectangle.
8. Then we turn the “pipe” so that the drawstring is along its edge.
9. We turn the part over so that the chipped part is at the bottom.
10. After this we begin to make an “accordion”. This part of the work should be done very carefully and carefully. First, we bend the edge of the part, placing it on top of the drawstring and the gathered edges of the rectangle. We check that our bookmark is equal in width to the width of the drawstring. If this is the case, everything is in order, but if not, mix the parts so that both widths match. For ease of work, you can pin the resulting “package” together with pins.
11. We stitch the resulting “accordion”. Of course, stitching repeatedly folded fabric is not very convenient, but considering that our bandana is made of light fabric, it is still possible to do this. Then you should carefully trim off the excess edge of the fabric.