How to clean a rabbit hat? Caring for rabbit fur How to clean a rabbit at home

Rabbit clothing is very warm and looks attractive. Like any fur product, it needs delicate care and can suffer if improper attempts are made to remove stains or refresh the appearance. There are several proven safe ways to clean rabbit fur at home.

You will need any natural sorbent. Kitchen arsenal in the form of starch, semolina, and bran is suitable for these purposes. They perfectly absorb dirt, including fat, without affecting the color and structure of the fur. Please note that cereal or starch will darken when absorbing dirt, changing viscosity. You need to change the product until it remains clean. The cleaning process with all three bulk products is similar:

• the product is applied to the fur;
• rub into the pile with massaging movements;
• left for half an hour;
• thoroughly shake out and comb out with a soft bristle brush.

Never comb rabbit fur against the direction of hair growth. This way you can make the product go bald.

If you have a fur coat made of white rabbit fur, then, alas, our polluted streets are not intended for such delicate products. In winter, you can clean fur in a snowdrift, but this is more likely a method for residents of ecological areas. Therefore, you will have to use damp white cotton instead of snow. The steps are quite simple. Dampen the cloth and wrap the rabbit product in it. Hang the fur coat on hangers and start beating with a carpet clapper. This way, all the dust and stubborn dirt will come out and remain on the wet fabric.

If you need to clean fur from stains at home, then table vinegar will come in handy. Dilute it in equal proportions with warm water and wipe the affected area with a sponge. You can also refresh the collar area from organic contaminants. If the item is too dirty, then you need to add a little ammonia and 3 tablespoons of table salt to the solution. Apply the mixture to the stains and leave for 20 minutes. Afterwards, rinse with a damp, clean cloth and leave to dry in the shade.

Precautionary measures

• When cleaning rabbit fur at home, you need to be careful. If you doubt how a product will react to a particular product, test it on an inconspicuous area.
• Under no circumstances should you wash rabbit fur in an automatic washing machine, even on the delicate cycle. As a result, you may end up with a bald or misshapen product.
• Do not use store-bought products with aggressive whitening ingredients. Always read the ingredients and test them on the inside of the product.
• Avoid brushing your rabbit's fur with fine-toothed combs or brushes.
• Do not dry fur items on radiators, fireplaces, or direct sunlight.

By observing these simple taboos, you can keep your favorite rabbit fur item for many years. Remember that keeping it clean significantly extends the life of your fur wardrobe. And dry cleaning is not always better than cleaning it yourself at home. Choose the right home remedy and your rabbit will once again enjoy a fresh and clean appearance.

Products made from rabbit fur are among the most frequently purchased on the domestic market. It’s not surprising, because not only fur coats are made from it, but also collars and hats. However, many owners of such things are faced with a problem related to cleaning fur. You will learn how to clean a rabbit fur coat at home from this article.

Grandma's secret to getting rid of dust

In a time when there were almost no cars and most of the snow was white and not brown, fur coats were cleaned right on the street. To do this, they laid it with a pile on the snow and carefully beat it out. Eventually, all the dust that accumulated in the garment fell onto the snow. The result is a perfectly clean fur coat. Now this method will be relevant only for residents of environmentally friendly areas.

However, there is another way to clean such a piece of clothing - it will be relevant for residents of big cities. To implement it, snow is replaced with pure cotton material, after which:

1. Hang the item of clothing on a hanger.
2. Wrap it in pre-moistened cloth.
3. Carefully beat out the item of clothing.

Important! If the contamination is severe, you can replace the fabric and repeat the procedure. Once all the dust has been removed, you can begin to get rid of stains and greasy areas.

Fur of any type, including rabbit fur, is, first of all, a delicate material. If measures to remove contaminants are not careful, the material can be completely damaged. Before carrying out this procedure, you need to remember a few points:

• Washing rabbit fur in a machine is strictly prohibited.
• It is unacceptable to use strong chemicals when removing stains.
• Do not comb the pile with a fine-toothed brush.
• Drying a fur product on a radiator or using a hair dryer is prohibited.
• To prevent yellowing of a white rabbit fur coat, it should be wrapped in a thick cover of a dark, cool color. It is better to store such a fur coat in a cool place.
• To clean rabbit collars and hats, it is better to use cleaning products with a gel consistency.

By taking these rules into account, you can significantly extend the life of an expensive item and enjoy its warmth for a long time.

Basic methods of cleaning fur products

Before using the methods described below, you need to test their effectiveness on an inconspicuous area of ​​clothing. To do this, you need to apply a cleaning agent, wait 15 minutes, then remove it and objectively evaluate the result. If it does not affect the product, feel free to use this method.

Uses of hydrogen peroxide

This method is ideal in the fight against yellow spots caused by improper drying or prolonged contact with water. In addition to a fur coat, you can wash a rabbit hat in this way; to do this, you need to follow the following algorithm:

1. Mix 30 ml of 6% hydrogen peroxide, 300 ml of clean water and 20 ml of ammonia.
2. Pour the resulting solution into a spray bottle.
3. Spray it onto the item of clothing at a distance of 30-40 cm. Each drop should lie evenly over the entire surface of the item.
4. Gently run the brush through the pile.

Important! In this way, both the entire product and its individual parts (for example, collar and sleeves) can be cleaned.

Using semolina

Necessary materials:

• Vacuum cleaner (you can use a car vacuum cleaner).
• Basin or other container.
• Semolina. It can be replaced with regular potato starch.

Important! If the fur item is heavily soiled, it is recommended to remove the fur part from the lining and wash each part separately.

To clean a rabbit fur coat at home, you must follow the steps described below:

1. Pour approximately 10 liters of warm water into the prepared container, adding 1.8 kg of cereal or starch to it.
2. Dip the fur into the liquid, rinse well and shake it thoroughly.
3. When all manipulations are completed, walk over the treated surface with a vacuum cleaner with a soft attachment. Before this, you need to lay out the fur coat on a horizontal surface with a white sheet.
4. When the procedure is completed, you should sew the lining back.

The secret of oat bran

Even with the help of oat bran, you can thoroughly clean a rabbit fur coat at home. To do this you need:

1. Wash the non-stick frying pan and dry it.
2. Pour about 100 grams of oat or flax bran into it.
3. Heat the mixture on the stove, but do not fry.
4. Lay the fur coat on a clean table, pour heated bran onto it and rub it in thoroughly. If the composition is not enough, make more.
5. At the end of the procedure, the fur must be combed with a special brush in the direction of the villi, and then hung on a hanger.
6. When the fur coat dries a little, it should be combed again, being careful not to harm the fur.

Important! Many housewives use a broom as a brush. You should not take this into account, as there is a risk of staining the item of clothing even more.

Using table vinegar

This composition is used not only to wash a rabbit hat at home, but also to give the fur product silkiness and softness. To use this method, you must follow the following algorithm:

• Dilute 9% vinegar with clean water in a ratio of 1:2.
• Dip a cotton pad into the solution and walk it over the contaminated area several times.

Important! Do not press too hard on the fur; carry out the procedure with extreme caution.

• When the manipulations are completed, you need to wipe the product with a soft damp cloth and dry it naturally.
• Brush your fur coat or hat with a special brush.

Important! Since rabbit fur is very capricious, you should use only mild table vinegar. If essence is used, it must be diluted with cold water at the rate of 100 ml of vinegar per 1 liter of filtered water.

We use children's talc

This method is classified as dry, since there is no need to treat the product with water before performing the procedure. To wash a rabbit hat at home in this way, you need:

1. Cover the entire surface of the product with powder.
2. Rub it well into the pile so that all greasy stains are absorbed into the product.
3. Leave the product in this position for about 15 minutes.
4. When the time is up, shake the product and vacuum.
5. Brush the product with a soft brush with frequent teeth. Its role can be performed by a brush for animal hair.
6. Remove talc residue using a hair dryer or fan.

Important! Talc can be replaced with wheat flour, and the principle of action will not be different.

Gasoline use

Required materials:

• Pure gasoline (the kind used for lighters is suitable).
• Corn starch.
• Brush designed for fur products.

Important! Before you start processing your fur coat, you need to open all the windows and make sure there is no open fire nearby. You should also take into account that there should be no children or animals in the room.

So, here is the basic procedure that will help you wash a rabbit hat at home:

1. Shake the fur coat several times. The ideal option would be if the product has already been knocked out on the street using the “grandmother’s” method.
2. Mix 100 g of starch with gasoline so that you end up with a mixture similar to sour cream.
3. Rub the resulting composition against the direction of the villi.
4. Shake the product and repeat these manipulations several more times.
5. When all the steps are completed, the fur coat needs to be combed, removing any remaining mixture.

Important! You may be bothered by the smell of gasoline after the procedure. Don't worry, it will disappear in 3-4 days.

A rabbit fur hat gets dirty quite quickly when worn, so it needs timely and proper care. The answer to the question how clean a rabbit hat You can look for dry cleaning specialists, entrusting them with the restoration of your hat. However, you can do this yourself. To find out, you need to turn to simple and effective means, such as:
1. Talc, baby powder, flour, starch: the selected product is evenly distributed on the surface of the product, lightly rubbed into it and left for half an hour. After this, the hat is shaken off, and the remaining substances are combed out of the fur with a soft brush or comb with rare teeth (a vacuum cleaner, hair dryer or fan can also help remove them).
2. Bran: not too hot bran (wheat, rye), heated in a frying pan, pour onto the fur, and then perform the steps described in the first paragraph.
3. Table vinegar: 9% vinegar is mixed in the same volume of water, after which the product is wiped with this composition using a cotton pad. Remains of the product are removed with a damp cloth.
4. Gasoline and denatured alcohol: purified gasoline is mixed with denatured alcohol in a 1:1 ratio, and then the fur surface is wiped with a cotton swab. After cleaning, the product is well ventilated.

To clean the rabbit hat from dust, it is wrapped in a damp light cloth and carefully knocked out.
If the need arises clean a Rex rabbit hat , you can safely try using any of the listed methods.

How to clean light rabbit fur

White fur tends to acquire a yellowish tint over time. To find out the most effective remedy how to clean a white rabbit hat , you can use:
1. Dry cleaning described above using potato starch and semolina.
2. Hydrogen peroxide: 1 tbsp. A spoonful of 6% peroxide is mixed with a few drops of ammonia and a glass of water. The resulting solution is evenly sprayed onto the surface of the product using a spray bottle at a distance of 30-40 cm, after which the fur is dried and combed.

How to clean a knitted bunny hat

Owners of knitted rabbit fur hats may have a question: how to clean a knitted bunny hat. The answer may surprise them, because knitted bunny hats can even be washed! To do this, you need to soak the product in warm water with powder for 10 minutes and then carefully wash it by hand. Rinse and pat dry with a towel, and then dry the hat on both sides with a hairdryer. Place the headdress on a glass jar for 12 hours to dry the insides.

How to Clean the Lining of a Rabbit Hat

You can remove small stains from the lining fabric using a mixture of equal parts of denatured alcohol and ammonia. If you need to completely refresh the lining, then you need to carefully tear it off from the hat, wash it in water with added powder, and after thoroughly drying, sew it back on.
A rabbit has very delicate, fragile and delicate fur, so when caring for it you must follow the following rules:

1. Before cleaning the product, test on an inconspicuous area.
2. Do not expose fur to strong mechanical stress.
3. Clean fur only in the direction of pile growth.
4. After wet cleaning, dry the product away from heating devices and direct sunlight, periodically combing the fur.
5. Carry out product care during the season as needed, as well as at the end of the season and before the start of a new one.

If you still have doubts about how to clean a rabbit hat at home effective and, most importantly, safe, you should entrust the care of your headdress to experienced craftsmen.

Rabbit fur clothing has become popular due to its beauty and warm material. But like any thing, a product made from rabbit fur must be properly cared for. Most often, stains appear where the collar or pockets are located. You can perform the cleaning procedure yourself, without using chemical cleaning.

Fur can be washed at home using the following products:

• acetic acid;
• semolina;
• hydrogen peroxide;
• talc in powder form;
• starch;
• gasoline;
• soft bristled brushes;
• ammonia;
• bran.

How to clean rabbit fur at home using these products? Can these funds be used? Let's find out.

How to clean a rabbit fur coat using these products? These products are capable of absorbing dirt and grease. In this case, no chemical effect occurs. Cleaning with these dry substances can be done at home. Let's look at the cleaning process:

1. First, you need to apply talc to your clothes.
2. Then, using light and smooth movements, begin to rub the product into the fur.
3. Wait about half an hour.
4. Finally, shake out the rabbit fur coat and use a soft bristle brush to remove any remaining product.

You can make a mixture of starch, talc and semolina. Ratio – 1:2. The cleaning technology is the same. Rabbit fur is delicate. Rabbit fur fibers are thin. Therefore, to clean the remaining mixture, you need to use only a soft-bristled brush. Movements must be careful and smooth, otherwise the fur item being washed may be damaged.

These products may change color. Therefore, cleaning must be done as long as they remain white.

Removing stains

If fat gets on a fur coat or hat knitted from rabbit fur, it is not necessary to use a powerful stain remover. A solution consisting of water and acetic acid will help you cope. Ratio – 1:1. There is another recipe that will help get rid of dirt. For this recipe you will need the following ingredients:

1. 400–450 ml of ordinary water;
2. 1 tbsp. l. ammonia;
3. 3 tbsp. l. table salt.

30 minutes after you have applied the prepared solution to the problem area, wipe the area with a damp cloth. It is better to use a cotton napkin.

We clean a fur coat or hat using hot bran. Hot rye bran will help eliminate the most stubborn fatty stains. First, place the rye bran in a frying pan, which must be preheated beforehand. The bran should be heated to 50˚C. They must be stirred while heating. You can determine the temperature like this: put your hand on the bran, and as soon as it becomes hot, it means the desired temperature has been reached. After heating, the product must be rubbed into the affected area until the unpleasant mark disappears.

Cleaning the lining

A common case is that the top of a rabbit fur item is clean, but all the dirt is concentrated on the lining. To clean it, use the following methods:

Cleaning white fur

After a certain period of time, a tint of yellow may appear on the white fur. How to clean a white rabbit fur coat? You can wash fur using a solution that will consist of the following ingredients:

• ½ tsp. ammonia;
• 1 tsp. hydrogen peroxide;
• 200–250 ml of ordinary water.

First, soak a cloth in this solution. Wipe the white fur with a damp cloth, then allow it time to dry. Do not use a hair dryer or other device for drying. Drying should occur naturally. You can add gasoline to the solution, but it leaves an unpleasant odor that will disappear in 7–8 days.

Using these tips, you can wash a fur coat at home, and clothes made from rabbit fur, namely a hat or fur coat, can be worn for a long time.

Rabbit fur outerwear is warm and beautiful. Like any things, it needs proper care: timely and proper cleaning. You can clean fur clothes at a dry cleaner, but knowing how to do it correctly at home, you can do it yourself. The following tools are suitable for this:

• talc;
• vinegar;
• hydrogen peroxide;
• bran;
• semolina;
• ammonia;
• petrol;
• starch;
• soft brush.

Bran, talc and starch

Starch, semolina and bran are sorbents of natural origin - they absorb dirt and grease without having a chemical effect on clothing. Talc has an inorganic (mineral) nature, but it also adsorbs organic contaminants well and is safe for fur products. You can clean fur at home with all these means. The technology for removing contaminants using bulk materials is the same:

• apply starch to a hat or fur coat;
• rub it into the fur with light movements;
• leave for a while - 15-30 minutes;
• Shake out the fur item and comb out any remaining starch with a soft brush.

Starch and talc can be mixed with bran or semolina in a ratio of 1:2 - 2 parts of cereal or bran and one part of starch or talc. When cleaning a fur coat or hat from the remains of bulk materials, you need to act very carefully and make movements in the direction of the growth of the villi. Rabbit fur is delicate and the fibers are thin. If you use a hard brush or make sudden movements when cleaning, you can damage the fur product.

Absorbing dirt, sorbents change color. Cleaning should be done until the starch or talc remains white.

Grandma's secrets

Previously, when there was a lot of snow in winter, it did not turn gray from car exhaust and production waste; a fur coat was cleaned outside in frosty weather. It was laid out with the pile down towards the snow and knocked out. As a result, all the dust and dirt came off the fur coat, it became clean and shiny. Today, only residents of ecologically clean areas where there is enough snow in winter have this opportunity.

However, you can still clean fur at home in a similar way by replacing the snow with a damp white cotton cloth:

• hang the fur coat on hangers;
• wrap it in a damp, clean cloth;
• knock out.

If heavily soiled, you need to change the fabric to a clean one and repeat the process. Once the dust has been removed, you can move on to cleaning organic contaminants - greasy areas on the collar or sleeves and, if necessary, stains.

Removing stains

If splashes of grease accidentally get on your fur coat, it is not necessary to use strong stain removers. A 1:1 solution of water and vinegar will also help remove stains at home. Organic contaminants on the collar and sleeves are removed in the same way. You can also use this recipe:

• 400 ml water;
• 1 tbsp. spoon of ammonia;
• 3 tbsp. spoons of salt.

Half an hour after applying the solution, the area with the stain should be wiped with a clean damp cloth, and then with a dry one - cotton or linen. Another good way is “White spirit” mixed in equal proportions with ammonia. After application, it must also be removed with a damp cloth.

Hot wheat or rye bran is an option for removing stubborn fat stains that cannot be cleaned by other methods. To do this, the bran is placed on a heated and, of course, clean frying pan. Stirring, heat them to about 50 degrees. You can determine by touching the bran: as soon as your hand becomes hot, the desired temperature has been reached. After this, the heated mass is rubbed into the problem area until the stain comes off.

How to clean the lining?

Often in fur products the top is clean, but stains appear on the lining. To avoid tearing it off your fur coat, you can use the following methods.

• Sweat stains on the lining of a fur coat can be cleaned by applying a mixture of denatured alcohol and ammonia in equal parts.
• A soap solution is also suitable for lining fabric, but it must be applied carefully so that moisture does not get on the inside.
• Amway spray is an ideal product for removing dirt from the lining of a fur coat at home. Simply apply it to the dirt and then remove it with a clean sponge.

White spirit can be replaced with purified gasoline (gasoline for lighters is highly purified). In this case, the proportions in solutions remain the same.

How to clean white fur?

White fur tends to acquire a yellowish tint over time. The following solution will help remove it:

• ammonia – 0.5 tsp;
• hydrogen peroxide – 1 tsp;
• water – 200 ml.

Use a rag soaked in this solution to wipe the fur and allow it to dry. You can also prepare a paste from burnt magnesia (magnesium oxide) and purified gasoline. It is rubbed into the rabbit's fur, and after a while the fur coat, cape or hat is shaken, and the remaining pulp is carefully combed out. The fur product should dry naturally, without using a hair dryer or other heating devices. The disadvantage of this method is the smell of gasoline. To remove it, after completely drying, you can wipe the fur with a sponge dipped in an aqueous solution of vinegar (ratio 1:1). But even without vinegar, the smell disappears within a week.

Before removing yellowing, it is necessary to clean the fur product from dust and dirt using starch or bran.

Precautionary measures

Any fur, and especially rabbit fur, is a delicate material. Careless actions can ruin it forever. To clean a fur coat or cape and not aggravate its condition, you need to remember a few “taboos”:

• Under no circumstances should fur items be washed;
• It is not recommended to use strong chemicals to remove stains;
• no need to comb the fur with a fine-toothed comb;
• Do not dry fur clothes on a radiator or with a hot hair dryer.

Remembering these simple rules, you can cope with dirt on your own and wear your favorite fur coat for many years.