Master class on creating a shamballa bracelet with your own hands. How to make a Shambhala bracelet with your own hands from natural beads. Photo and video. Technique and Scheme of Weaving shamballa bracelets with your own hands

You will learn how to weave a double shamballa bracelet with your own hands in this master class. All you need to do is prepare the necessary materials for work and follow the assembly steps.

Accessories:

Turquoise beads 12 mm 18 pieces
Metal beads 4 pcs
Shamballa cord or waxed
Tools: scissors, lighter, glue.

Assembly:

We measure two pieces of cord 35-40 cm long each. We form a double knot at each end so that they hold the outer beads. We string one metal bead, and then 9 turquoise beads on each cord.

We step back from the edges about 10 cm and draw another piece of cord under the main two laces, up to 1 m in length.

Using the visual diagram of knots for shamballa bracelets, we begin weaving.

Knot diagram: place the leftmost cord (according to the diagram it is red) on top of the two central laces (blue). We first place the rightmost cord (yellow) on top of the left cord (red), which was just placed above the central ones, and then take this outermost (yellow) cord under the central cords (blue), pull it over the leftmost cord (red) and tighten it.

We repeat all the steps, only now we start on the other side: We place the outermost, now right (red) cord on top of the central blue cords. We place the leftmost (yellow) cord on top of the red cord, and then draw it under the central blue cords and loop it over the red cord. We tighten it.

We braid 5-6 knots.

Now we take the leftmost cord under the cords and bring it out after the first bead. We begin by wrapping the cord around our beads in a spiral along the entire length.

We do the same with another piece of lace, but we wrap it in the other direction, giving our bracelet the necessary pattern.

We connect the edge of the segments after the beads into the first knot and weave the same number of shamballa knots as at the beginning.

After the last knot, carefully tighten the sections of cords and cut off the excess edges, they are indicated in the photo with dotted lines. If you use a special cord for weaving shamballa, which is impregnated with wax, then when treating the edges with fire, you will reliably prevent the knots from unraveling. If you use regular waxed (cotton) cords, as in this master class, then you need to add a few drops of super glue and press the ends to the main nodes.

We string one metal bead at a time onto the sections of the central cords, as before, and then form knots from the ends so that the beads do not slip through.

Now we connect the pieces of cords together parallel to each other and use a separate piece of cord (30-40 cm) to connect them using the first simple knot.

The double shamballa bracelet is ready.

Collect double shamballa bracelets with different colors and shapes of beads and create your own interesting bracelet options.

Bracelets with the beautiful and mysterious name Shambhala are made from various beads that are connected with threads or cord. Moreover, the beads can be either artificial or natural. Shambhala bracelets differ from ordinary jewelry; they can be recognized by their characteristic weaving method. By the way, both women and men wear such bracelets.

Let's learn together how to weave a Shambhala bracelet. To create the Blackberry bracelet I needed:

• 7 purple cat eye beads;
• 6 purple beads with rhinestones;
• 2 small agate beads;
• one silver bead;
• 2 meters of purple waxed cord;
• glue Moment “Crystal”;
• scissors
• and two more stationery clips and a large format book.

Step 1. I cut off 50 cm of waxed cord - this is the “base”. I string all the beads onto the “base” in the order they should be placed in the bracelet, and tie knots at the ends of the cord.

Step 2. To weave Shambhala bracelets, I do not use any special machines or sophisticated devices. All you need is a large format hardcover book and a pair of medium sized paper clips. At a distance of 9-10 cm from the upper end of the bracelet, I secure the cord on the cover of the book with one clip, and the second, respectively, from below. Simple, inexpensive and quite convenient.

Step 3. After securing the “base” to the “loom,” I cut off one meter of waxed cord and make the first knot so that the knot itself is at the bottom of the “base.” Then, from the front side of the bracelet, the beginning of the weaving will look neat, as in the second photo.

Step 4. Then I do "right" node This is a convention that I use for myself. To tie a “right” knot, you need to place the right end of the cord on top of the “warp”, then pass the left end of the cord ABOVE the right end to the left of the “warp”, then slip it UNDER the “warp” and bring it into the loop to the right of the “warp”.

Step 5. Next I perform "left" node Accordingly, I do everything in the other direction: I put the left end of the cord on top of the “base”, I pass the right end ABOVE the left, I dive under the “base” and bring it out through the loop to the left of the “base”.

Step 6. Then I perform the “right” knot again, move the first cat’s eye bead to the knots, and after it I perform a combination of “right-left” knots.

Note that if you perform a right-left knot combination, the outer side of the knot (as I call it) will be located on the right (as in the second picture). And if you perform a combination of left-right nodes, then the outer side of the node will, accordingly, be on the left.

As a rule, Shambhala bracelets are woven by alternating these combinations between beads. But, in my opinion, it looks good only if all the beads in the bracelet are the same. And if they are different, then this can be further emphasized by using a different order of combinations.

For this bracelet in particular, I decided that the first rhinestone bead would have knots on both sides on the right outer side, the second rhinestone bead would have knots on the left outer side, the third on the right outer side, etc.

Step 7 After the “right-left” combination, I move the next bead and again perform the “right-left” knot combination. I get what I mentioned above: my bead with rhinestones is framed both above and below by knots with the right outer side.

Step 8 The further sequence is as follows: after the third and fourth beads - a combination of nodes “left-right”, after the fifth and sixth - “right-left”, after the seventh and eighth - “left-right”, after the ninth and tenth - “right-left” , after the eleventh and twelfth - “left-right”.

Step 9 And after the thirteenth (last) bead there are three knots: “right-left-right”.

Step 10 Now you need to secure the cords. I turn the bracelet over, put the end of the cord, which becomes left, into the loop on the right (photo 2), drip a small drop of glue under it and tighten it. I cut off the excess as close to the loop as possible. Here, on the wrong side, I drip another drop of glue and press the right end of the cord to it. I cut off the excess. As a result, the face and back look like in photos 3 and 4, respectively.

Step 11 So, the main part of the bracelet is ready, all that remains is to weave the lock. To do this, I will first untie a knot at one end of the “warp” cord and thread both ends into a silver bead on both sides. This bead will be located in the center of the lock.

Fashion trends of recent decades have been focused on ethnic images. The optimal complement to this style is the Shambhala bracelet. In addition to its original, distinctive appearance, this decoration will protect against negative energy and help the owner find peace of mind.

According to legend, Shambhala is a mythical country surrounded by nine mountain ranges. For Buddhists, this is the center of the universe, a sacred place of tranquility and unity with nature. For Tibetan monks, getting to this country is considered the meaning of their whole life. The wicker talisman helps them understand all the mysteries of the sacred land.

Shambhala bracelets became known many centuries ago. Reciting mantras in absolute solitude, the monks wove their amulets from magic threads. It was necessary to tighten 9 knots - according to the number of mountain peaks. These knots protected the owner from dark forces and enemies. Over time, beads with various patterns began to be selected for the knots. Beads with the face of a laughing Buddha were especially valued - it was believed that such a talisman had magical powers and charged its owner with energy.

Tibetan monks are considered the first owners of Shambhala bracelets

It should be noted! A quarter of a century ago, the Scandinavian brothers Mikkel and Mads Korneral, having visited Nepal and become imbued with Buddhist philosophy, decided to create a collection of jewelry. It was decided to combine originality, folk traditions, and modern trends in art. Thus, Shambhala amulets gained worldwide fame and popularity.

The meaning of the amulet

The Shambhala bracelet is not only a stylish, beautiful decoration. According to legend, the amulet maintains the connection between the universe and man, symbolizing a pure mind and mental balance. Its sacred meaning is difficult to overestimate:

• Strengthens and cleanses the aura of the whole body.
• Mobilizes internal forces.
• Gives you the confidence you need to achieve your goal.
• Creates a protective shell in front of envious people, protects against damage.
• Provides peace of mind and inner harmony.

The amulet on the hand is not only and not so much a decoration. An amulet, with the help of its magical properties, can influence the fate of the owner - using the method of self-improvement to reveal the true secrets of the subconscious.

Three Shambhala bracelets on the hand

Basic bracelet colors

When choosing an amulet, you need to pay special attention to color. In addition to the banal combination with various clothes, the color of the amulet can influence energy flows on the life of the owner.

Here's what to consider when choosing a color:

• Considered to be the most active Red color- belongs to the element of fire. Will give the owner determination and perseverance. In addition, the red thread normalizes blood circulation.
• Blue color makes the wearer of the bracelet more resilient. This color is also responsible for insight - it helps to develop intuition.
• Green– the color of harmony, belongs to the element of water. Improves concentration and helps relieve stress. Green color is associated with spiritual renewal, the birth of all living things.
• Blue symbolizes the flexibility and wisdom of the owner. Also relates to the element of water. Helps get rid of aggressive thoughts and actions.
• Yellow- the color of the sun. Helps you fully experience the joy of life. Suitable for creative individuals. Stimulates creative activity, helps to be successful in all endeavors.
• Violet– the color of leadership and successful commercial operations. Promotes self-improvement and self-growth.
• Black color always popular. It symbolizes nobility and courage. Retracts negative energy.
• White– the color of true spirituality. Promotes cleansing and accumulation of positive energy.

The color of the Shambhala amulet can affect the life of the owner.

Attention! When selecting beads and natural stones, you can combine 2-3 color tones. With a wide variety of colors, it is impossible to predict the effect of their impact on the owner of the talisman.

The meaning of the stones in the Shambhala bracelet

When choosing a Shambhala amulet, the color of the decoration is important, but not decisive. The choice of materials has a deeper meaning. The bracelet, made of artificial components, does not contain any sacred meaning. Only precious or semi-precious stones have storage for a significant concentration of energy. Such a talisman directs all negative energy towards itself, thereby protecting the owner’s aura.

Natural stones for the Shambhala talisman should be chosen based on the current moment in life and philosophical position:

• for material well-being, stimulation of creative activity choose tiger's eye, amber, ; the latter helps normalize sleep and also helps fight male drunkenness;
• rose quartz, lapis lazuli, carnelian help in establishing love relationships, maintaining tender feelings between family members; rose quartz is not recommended for overly emotional people;
• female prefers pearl– it emphasizes sophisticated style, prolongs youth, protects against betrayal;
• for those who use their eloquence in the profession or establish communication with people, the stone is recommended onyx;
• cat's eye,– the best protection against gossip and envy, will add confidence and perseverance to the owner;
• and jade attract good luck to the owner of the bracelet.

Natural stones for the Shambhala talisman should be chosen based on the current moment in life.

Important point! It is necessary to regularly inspect the condition of the talisman. The presence of scratches indicates an energy attack, that is, the amulet fulfilled its function - it protected the owner from negative energy. If the damage is significant, it is better to replace the amulet (it is recommended to bury the damaged one in the ground).

How to choose a bracelet

The benefit of a Shambhala bracelet will be if it is made specifically for a person, taking into account his personal preferences and life positions. But many decide not to focus on this and purchase a ready-made talisman.

Here's what to consider when purchasing:

• make purchases in trusted stores that have been selling similar products for more than one year;
• the amulet is woven with high quality - there should be no drops of glue, scratches, or even more damage visible on the product;
• the style and life aspirations of the future owner, so that the talisman stones contribute to the achievement of their goals;
• It is not the owner himself who should put on the amulet, but a person close to him who truly loves him.

By the number of rows of a bracelet, one can judge its energetic effect on the body. It is clear that the triple amulet is considered by a large number of people to be a mysterious, divine sign.

Triple amulet of Shambhala. The number 3 is considered a sacred number.

A very fashionable trend is the purchase of a personalized amulet. Women and children are especially interested in this. There is nothing reprehensible in this - the properties of the talisman do not change in any way.

Choosing a Shambhala bracelet for men

How to choose a Shambhala bracelet for men and how do they differ from women's amulets? Men's jewelry is made in cool, dark colors, the stones of which emit a powerful energy field. This kind of energy is not suitable for all women. The female sex still prefers brighter, saturated colors. Otherwise, there are no restrictions in choosing a talisman.

Men's bracelet Shambhala

How to make a bracelet with your own hands

Weaving a Shambhala bracelet yourself is not only a pleasant pastime. First of all, it is an opportunity to relax and escape from everyday worries. The second very important point is that an amulet made with your own hands will definitely be charged with positive energy. In the end, you can always please or surprise your friends with a talisman.

Materials and tools for weaving Shambhala

To make a talisman yourself, you need the following materials:

• waxed (leather) cord or compacted thread slightly more than 2 m long;
• beads or pebbles with holes;
• glue;
• scissors.

The most important condition is to start weaving with pure thoughts and in a positive mood.

Shamballa bracelet weaving pattern

The weaving process is not complicated, it just requires perseverance. However, the first time you may encounter difficulties.

The weaving pattern looks something like this:

• Prepare 3 cords of approximately the same length. Connect these cords into a knot and secure it on a smooth surface.
• We draw the left thread for the Shambhala bracelet under the central one, then under the right segment. We carry out the same manipulations with the right thread, but only from above the cords.

• We form a node.
• The right and left segments must constantly alternate, the central one does not participate in weaving.

• Beads begin to be strung when 9 knots are formed.

• Each stone or bead is circled with thread or cord on 2 sides, then 3 knots are formed again. This is how each link of the future talisman is built.
• After processing the last stone (bead), you need to make a large knot consisting of 9 small ones and connect 3 threads into a knot.

• Apply glue to the knots to add strength.
• Cut off the remaining side threads for the Shambhala amulet, leaving the central cord.
• Make a knot using the main thread and try the clasp.

At first glance, the weaving process looks quite troublesome. The first 2-3 amulets need to be woven slowly and carefully. Then you can learn how to make a bracelet in one hour.

Video. How to make a double Shamballa bracelet

How to wear it correctly

This decoration truly has magical properties. In order for the amulet to please the eye and have a positive effect on the owner’s aura, you need to remember some nuances:

• It is prohibited to wear 3 or more amulets at the same time - the positive effect on the owner’s aura is neutralized;
• the bracelet is worn exclusively on the wrist of the right hand;
• be sure to take it off at night - the amulet must release the negative energy that it absorbed during the day;
• the talisman is stored in a place separate from other accessories; storage is not recommended even with its analogues;
• once every 3-4 weeks, the amulet should be left in the ground for a day or sprinkled with salt - in this way the talisman will be cleansed of negative energy;
• frost and heat also negatively affect the amulet - stones used in decoration can break.

A prerequisite is to remember to update the lace every 3-4 months. This will ensure a decent appearance of the decoration.

Daily care is required to keep the bracelet in perfect condition.

Interesting nuance! According to legend, the Shambhala amulet often determines its owner. With unknown magnetic forces, it attracts the eye of a potential owner. Mutual choice occurs on a subconscious level. Every person dreams of harmony and peace of mind. With the help of Shambhala bracelets, these dreams become closer and more real.

Anastasia Volkova

Fashion is the most powerful of the arts. This is movement, style and architecture in one.

Content

Today you can find many different types of jewelry that are not simple jewelry, but have a special meaning for a person. Thus, the shamballa bracelet is a real amulet brought from Tibet, and it is woven using natural stones, crystals or ordinary beads, which contain a certain meaning.

What is a Shambhala bracelet

Shambhala is a kind of talisman worn and woven by Tibetan monks. It is believed that with its help a person is able to find spiritual harmony with the world around him, creating energetic protection from evil spirits. The bracelet is universal, it can be worn by both women and men. It looks like a cord that is intertwined in a special way with beads made of glass, plastic or natural stones, which makes the decoration even more “strong” in its magical properties.

History of origin

Shambhala is a mythical country supposedly located in Tibet. Entrance there is allowed only to those who have learned the essence of the universe and live in complete harmony with themselves and the world around them. Thus, Buddhist monks have always had free access to this country, and according to legend, they were the first to weave these bracelets, putting a special meaning into them.

Shambhala consists of nine simple knots, which according to legend symbolize faith. This number was not chosen by chance: just nine knots can protect a person from the influence of evil spirits. The monks go through them one by one, like rosaries, reciting prayers for each. Later, Shambhala entered the culture of India, where new meanings were assigned to the bracelet: beads began to be woven into it, made from different materials, and given new meanings. So Shambhala became not only an amulet for cleansing energy, but also health.

Meaning by Zodiac sign

The choice of such a talisman according to the zodiac sign is based on what color stones or beads are woven into the bracelet. Each has its own specific properties and works stronger when in the hands of the “right” owner:

• Aries will suit dull red shades, transparent, translucent stones;
• Any shade of green will help Taurus achieve what they want;
• Geminis prefer heterogeneous colors, a combination of several tones, for example, a combination of stones of white, blue, light green, yellow;
• For Cancers, there is nothing better than warm pastel shades. Pearl, soft pink, milky;
• Leos prefer yellow and orange symbols;
• Virgos are suitable for all shades of gray, pearl tones, and transparent minerals;
• Libra will live a full life if they choose delicate pink, peach stones, soft shades of yellow, green;
• Scorpios will benefit from rich and deep red, dark blue, and black tones;
• Sagittarius can look forward to bright blue tones, reds, violet-reds;
• Capricorns will be happy if dark tones in any combination of them are in Shambhala;
• for Aquarius, all shades of blue and light blue are preferred;
• Pisces will like blue, lilac, violet colors, white, yellow, pink pearls, and green-colored minerals.

How to wear it correctly

These days, many people wear shambhalas, including celebrities. The bracelet is so versatile that it is unlikely to ruin the toilet you have chosen. Since ancient times, it was believed that it could only be worn on the right wrist, but over time this rule was lowered and the amulet was worn on both hands. The main feature remains only one thing: the bracelet should be put on the hand for the first time by the person who sincerely loves you and wishes you only happiness. Then the jewelry will work in full force, and then bring only good luck to its owner.

How to weave

Making shamballa with your own hands is not difficult. The main thing is to have the necessary materials and tools at hand. For one medium-sized bracelet (for a wrist diameter of 16-18 cm), you will need 2 meters of waxed cord of any color, 9 beads. You can use metal fittings for decoration. It is desirable that the color of the cord matches the color of the beads, then the bracelet will look harmonious. Before you start weaving, prepare your tools: scissors, glue or varnish, safety pins.

The technique of weaving shamballa involves tying knots, and all of them must be even and neat. Shambhala can be single, double or even triple. As soon as you learn how to make the simplest version of a bracelet, you can make any other one. Please note that the waxed cord should fit smoothly through the hole in the bead.

DIY Shambhala bracelet

Before you start weaving the amulet, you need to create the appropriate environment. It is best to make a Shambhala bracelet in a good mood, where no one will disturb you or confuse your thoughts. It is important to invest as much love and positive energy as possible into the future talisman, regardless of who you are making it for.

Simple bracelet

The technique of weaving a bracelet is very simple, especially if you are familiar with macrame knots. How to make shamballa with your own hands

1. From a cord 2 m long, cut the base - approximately 35 cm.
2. First, string the beads onto a short cord and secure them with pins on the pillow. This will make it more convenient to work further.
3. Take a long lace, step back 5 cm from the edge and tie a knot so that the loose threads are the same length.
4. Start tying knots as follows: place the right thread over the warp, creating a loop on the right and dragging it under the left cord, and pass the left thread under the warp, inserting it into the right loop. Tighten.
5. The next knot should be exactly the opposite of the first: place the left thread on the warp and pull it under the right one, and pass the right thread under the warp and insert it into the left loop.
6. So make another 7-8 knots.
7. Move the first bead, tie 2-3 knots again. Repeat with all beads.
8. After the last bead, tie several knots in a row again (depending on the diameter of your hand).
9. Detach the base from the pillow and connect the ends. The base has become double and you need to make a few more knots (5-6) on it. This will be a kind of clasp with adjustable length of the bracelet.
10. Trim the excess ends, and then be sure to coat them with clear varnish or glue.

Men's bracelet

The technique of weaving a bracelet intended for a man is no different from the female version. It’s worth paying attention only to the materials: men’s shamballas are often made of leather cords, in black, using dark natural stones (with black agate, hematite, labradorite) or corresponding beads: skulls, cubes, matte beads. It is difficult to confuse a men's bracelet with a women's one, because it looks brutal, without unnecessary rhinestones and multi-colors.

Double Shambhala

A double bracelet is suitable for those for whom one string of beads is not enough. It looks a little different than its traditional counterpart, but no worse. Shambhala weaving is slightly different from the previous version:

1. For the base, take two threads 35 cm long and put 9 beads on each. Pin the base to the pillow.
2. Step back 6 cm from the edge and tie a knot with a long cord.
3. Make 5-6 knots as described above.
4. Move the beads in and begin spiraling the entire set with the left thread.
5. Do the same with the right cord.
6. Another 5-6 knots, like the ones at the beginning, will help secure the structure.
7. The adjustable fastener is made as described above.

Triple Shambhala

Another version of a do-it-yourself amulet. The product will look very expensive, especially if you use beads made of natural stones. Weaving a shamballa bracelet from three rows looks like this:

1. You will need 3 cords for the base and a long cord for the binding (about 3 meters, it must be folded in half).
2. Secure the base, tie a knot on it with a long thread, stepping back 5-6 cm from the edge.
3. Place beads on all 3 bases.
4. Make 4-5 knots with double thread.
5. After the main weaving of all the cords together, make 4 knots on the central thread. You need to weave with threads that are closer to the center.
6. Move the left bead and braid the left cords with two knots.
7. Next, move the right one and braid the second bead on the right.
8. Braid the third bead in the center with cords that are closer to it.
9. Repeat the same with the remaining beads.
10. At the end there should be a central bead.
11. After this, make another 4-5 standard braids and finish everything with an adjustable fastener.

Made from natural stones

Shambhala stones are mainly made from natural stones, because this is the only way they can bring positive energy to their owner. Stones should be handled very carefully and not dropped, otherwise they may break. You can select natural minerals simply by color, value or zodiac sign. Shamballa bracelets with stones turn out to be somewhat heavier than if you weave ordinary plastic beads into them, but they will look much more beautiful and noble.

Today we will tell you how to weave a shamballa bracelet for beginners. The Shambhala bracelet came into modern life from the monks with the help of the Kornerup brothers, who in 2001 presented a collection of these bracelets with precious stones. Naturally, the cost of this jewelry reaches several tens of thousands of euros. While traveling in Nepal, they studied the culture and brought back the idea of ​​​​creating stylish items for the general public.

The Shambhala bracelet is now created simply as a decoration with a trademark, without carrying any secret meaning, although initially Tibetan monks wove not just a bracelet, but a talisman, an amulet or a talisman, investing in it a special sacred purpose. The energy of this amulet helped the owner to find himself in this world, harmony and unity of man with the entire Universe was achieved. It was imperative to make this bracelet with your own hands, weaving into it stones selected according to the stars or the advice of a fortuneteller.

Due to the fact that many, having seen expensive Shambhala jewelry, wanted to have similar products for themselves, a huge offer of cheap bracelets with simple beads appeared for a wider and unpretentious public. However, knowing the history of the Shambhala bracelet, it is preferable to make it yourself, choosing a color scheme and putting your own energy into it, even if it is semi-precious stones or simple beads.

Selection of stones and colors

The color of the beads can be selected in accordance with the element to which the zodiac sign belongs. For example, fire signs (Aries, Leo, Sagittarius) should give preference to various red, red-orange and orange shades in beads. Signs (Taurus, Virgo, Capricorn) entering the earth element are better off choosing yellow, yellow-brown, and brown tones. For Gemini, Libra and Aquarius (element of air), green, light green and blue colors are suitable. The rest of the zodiac signs (Cancer, Scorpio, Pisces) belong to the water element, therefore the colors should be similar to the aquatic environment, i.e. blue, lilac, blue-lilac, from bright and saturated to pale and translucent.

All this knowledge for beginners in weaving a shamballa bracelet will be useful, because... all this will be useful in the process of work, and the direct weaving process can be examined using the example of a photo tutorial.

Photo tutorial on bracelet

A short description for the photo tutorial. You need to prepare:

• wine-colored waxed cord 2.5-3 mm thick, 2.5 meters long (it’s better to have a supply that can be easily cut off than to think later about how to add the missing material, this is especially important for beginners in weaving);
• glass beads for the main weaving in the amount of 9 pieces, size up to 1 cm in diameter, color: red, green and brown;
• glass beads for decorating the ends of the bracelet from 2 to 6 pcs., size 5-7 mm;
• scissors;
• PVA glue or clear nail polish;
• you can come up with a base for weaving, the main thing is that it is flat, a piece of foam plastic or a board with a nail/screw, a table and tape for attaching the weaving, a tablet with a paper holder or a paper clip, etc.

There is practically no pattern for weaving a shamballa bracelet; work on it happens intuitively, i.e. that the color of the materials and the order of the beads in the weave are chosen at the request of the master.

An important condition is that before purchasing beads, you must check the hole in the beads; it must fit the size of the cord.

Weaving begins by cutting the cord into pieces. The knotted or “lazy” cord should be about 50 cm, it is attached to the surface. The second long cord is a working one, the middle of this cord is attached with a simple knot on a knotted base at a distance of 7-8 cm from the edge of the base, therefore, you get two long working ends with an approximate length of 1 meter, located on both sides of the “lazy” cord. The beads can be immediately put on a short cord and secured to the free end of the cord, or they can be put on as needed during work.

The knot used for weaving is called a double flat knot; it is a simple macrame knot. The weaving pattern will be clear even to beginners in weaving.

The knots are woven close to each other so that the weaving looks even and neat, the required initial number of knots is 5 pieces, and then the first bead is raised to the weaving, it is braided on both sides with the ends of the working cord and 1 or 1.5 double flat knots are tied.

When work on the main part of the bracelet is completed, it needs to be detached from the surface and placed in a circle so that the ends of the knotted cord lie together.

The weaving of the fastener begins, inside the same knots there will be not one cord, but two ends of the cord, and the knots should not be made too tight so that the ends slide easily inside the knots of the fastener.

As you weave the clasp, you need to try on the bracelet to make it the right size; 9-10 double flat knots should be woven into the clasp.

The weave ends with a regular knot, and to prevent it from unraveling in the sock, it should be secured with a small drop of glue or varnish on the reverse side. Small beads are put on the sliding ends of the clasp, depending on the desire, from 1 to 3 pieces.

The ends of the working cord are cut to the required length and you can also put beads on them, securing them with finishing knots.

Here is the finished Shambhala bracelet on the hand of the craftswoman.

An example of double shamballa

With experience, you will want to weave a more complicated version of the bracelet, for example, a double shamballa bracelet.

How to weave double shamballa? Description below.

The length of the waxed cord increases to 3.5-4 meters, the number of beads is also doubled to 16 pieces with a bead size of 10 mm, depending on the size of the bead, more may be needed.

Weaving the beginning of the bracelet can also be done with a double flat knot, only not one knotted cord will be braided, but two. The diagram is presented below.

Having made a certain number of knots (4-8 pieces) for each knotted cord, i.e. those that pass inside the knot, beads are put on, and the working cords, first one, then the other, wrap the cords with beads in such a way as shown in the photo: