Wire jewelry. Intricate jewelry: do-it-yourself wire jewelry. Wire comb with beautiful pearls for a bundle

Homemade jewelry made of wire and large beads of all kinds will be a fashionable and elegant accessory to any look. They are easy to create, but at the same time they look original and expensive. It is important to think over all the details ahead of time and buy the necessary materials and tools.

Of course, the most important thing is to get a wire. The wire is easy to use, but more importantly, it is flexible, discreet and comfortable.

Wire products can be of different colors and types, they can be suitable for both women and men.

Tools and materials

In order to independently make a wearable product from wire, you do not have to look for complex devices. All the usual pliers, a hammer, round-nose pliers and a small-sized vice may be needed by everyone.

Only now it should be borne in mind that when working with wire, it is more optimal to use specialized pliers, they have a smoothed inner surface and they cannot damage the material.

Pliers with removable nylon pads can also be attributed to special devices, they serve to straighten an unsuccessfully twisted spiral from a wire.

When choosing a working material, a thick electrical wire, which can be purchased at all electrical stores, deserves more attention.

If the starting material is too hard and does not bend at all, it must be softened by heating over the stove. In this case, it is imperative to work with gloves, otherwise you can easily seriously injure your hands.

In jewelry, wires with a diameter of 1 mm, 0.6 mm and 0.2 mm are most often used.

It is best to use a wire with a diameter of 1 mm, in order to better fill the gap between the beads, if used.

In addition, the thicker the wire, the longer it will last. And if the wire is also thin and the jewelry is with beads, then the accessory will not last long, because the wire, with free movement inside the beads, will rub against their edges and, in the end, being too thin, will simply break.

The lighting should be good, not worth working in the dark or twilight.

Types of weaving wire accessories

Today in the world there are several basic techniques used in the creation of their masterpieces by the masters and creators of the whole world.

Wire wrap

This technology is considered the most popular in its field. With the help of it, you can gracefully braid beads, stones. Thanks to her, original cuffs, earrings, brooches, etc. are obtained.

Viking knit

This weaving technique is not as beautiful and delicate as the previous one, and outwardly reminds everyone of the usual knitting from yarn. It is also called "chain mail".

At the very beginning, when meeting with any kind of creativity, panic and confusion always begins. Where to begin? What if it doesn't work? These are understandable fears, but you should not run away from difficulties and give up without even trying.

The end of the world will not happen from one attempt, but perhaps a new hobby will be found. Just do not immediately take on the most difficult, any science must be comprehended from the very bottom.

For example, it would be nice to try to build a bracelet. You don't need too much for him, just scissors, a pen shaft, wire, glue and rhinestones.

First, of course, you need to build a base. It requires a wire about 20 cm long, rolled into a loop, so that it looks more like a cross. Next, you need a new piece of wire. They need to wrap the first part in zigzag movements.

After 2 rows are made using a similar method, the workpiece itself must be transferred to the back of the handle rod. From this moment on, a new wire is gradually interwoven, with which you need to make "loops" as at the very beginning.

At the end, when the bracelet has reached the desired length, it will have to be removed from the rod, as well as all unnecessary, fixed and decorated with rhinestones.

Precautionary measures

When working with wire, there are some safety rules that must be followed, it is important that a hobby cannot be the cause of a tragedy, even the smallest one.

For safety reasons, it is better to wear gloves before work and hide your eyes behind glasses. Be careful and attentive when working with sharp cutting objects such as round nose pliers or side cutters, otherwise you may accidentally injure yourself.

Simply put, you should not be careless with wire, it is better to act slowly and carefully, so you will be safe, and the decoration will turn out to be even more beautiful.

Photo of wire jewelry

There are plenty of quality ideas and instructions for DIY wire making on the internet. Anyone can easily familiarize themselves with them, and then do something with their own hands. This requires a little: your desire, a small amount of skill, personal time and a couple of handy tools. If all this is available, then the matter remains only for inspiration.

Beginners

What do you need to make a decoration? Usually, the most obvious method is started here - the stroke. To do this, you need to take brass, aluminum, silver and other metals. A thick wire is just needed for the base of this product, and then with a thin one, you can braid everything at the right angle.

Various craftsmen also often add stones, beads and beads here. Then just wonderful unpretentious rings turn out.

Rings

More difficult exercises will go when cutting the wire about 15 centimeters or so. We need it in order to then put beads on it and place them right in the center. When working, use any thing that is similar to the diameter of your finger.

An ordinary candle from a hardware store plays very well in this role. The wire is wound around the object so that the ends are on both sides. Fasten everything very tightly and everywhere. It is best to scroll somewhere around the beads four times. Then everything can be safely cut off.

The ends should be about one and a half centimeters. Then it must be screwed onto the ring so that the buttonholes are equal. We do the same on the other side. The finger will never prick in this way.

Then, using pliers, press the ends tightly to the rim. The pliers are pushing harder and harder so that the seal is as tight as possible.

The instructions on how to make jewelry out of wire according to the alternative option are identical in the presence of the necessary materials, but their application is different. The wire is wrapped around the candle. A bead is put on one end.

Then the ends are bound together with a binding. Weave the free tip into the one with the bead. From the top, we go to the bottom, and do this trick three times. The decoration is complete.

Bracelets

The technique of making jewelry changes frequently. Very often, for a good execution of the bracelet, you need a lot of wire, as well as tools - pliers and round-nose pliers. Don't forget about a variety of beads that will become the brightest elements.

It all starts with a loop at the very base. After one and a half centimeters, another loop is made with the help of round-nose pliers. The ends will then need to be connected and cut. Then you connect all the squares together.

The wire product goes straight into the loop. At the longest end, bend and cut off the excess. We just bend the little one. Then we plant a bead and apply another square. A neat clasp is attached at the end. Bingo!

Earrings

A master class on wire jewelry is usually held with the same auxiliary items. Again, the whole work is built from a loop at the base. An eight must be screwed under it. We repeat everything over and over again. We cut the wire and tighten everything.

After that, the work is already being built with beads. The ends are twisted into a small loop, a bead is stretched in this place, the pliers will then help to form on both sides of the loop. The ends are twisted back.

For hair

Little girls, and those who are older, love to decorate their hair in every way. Learn how to properly weave jewelry such as hairpins and combs.

If you want, you can learn such a simple craft with your own hands. Always draw everything initially on paper so that there are visible landmarks.

It all starts at one turn, and then smoothly flows into the outer circle. As a result, you should get a beautiful circle with a mustache.

Between the beads you will need to turn about 6 curls, and between the details up to 10. Then you will have a pleasant-looking work. Use the smallest details around the edges, and in the middle, use beads.

The same can be safely said about hairpins. Photos of wire jewelry show us that there are not so few options for all kinds. The main thing is to clearly follow all the instructions that you have, but always think so that you can add your own.

Distinctive features always make your item unique and unrepeatable. Particularly high quality options are obtained from copper wire. Here nippers and drills will already be auxiliary.

As a result, you can watch many interesting works from other authors. Everyone has a stormy fantasy. The result is unique miniature works of art. If you automate this process, then there will be no end of clients. This is a very popular thing on the market now.

Photo of wire jewelry

You can create a beautiful piece of jewelry or decorative piece of furniture using many different methods. However, they look the most complex and graceful.

Wire history

As a material for creativity and the creation of the necessary household items, people began to use it 3000 years BC. Archaeologists were able to establish that in Sumer (around 2600 BC) wire was used to make women's hair ornaments, which are gold and silver ribbons. Over time, they began to use it for the manufacture of chain mail, candlesticks, brushes for brushing horses and more.

But where did the craftsmen get the wire suitable for such products? Initially, it was created in a rather laborious way: they cut metal sheets into thin strips, then twisted them together and rolled them between two flat sheets. The second way to obtain it was also winding thin metal strips onto a round core. Today it is produced by pulling it through special conical shapes, which is why the method of its production is called drawing.

Wire types

Most often, wire weaving involves the use of copper wire that has a beautiful appearance and color. In addition, brass, steel, silver and aluminum wires are used in needlework. In addition to the entire sale, you can find wire with an additional coating (an alloy of other metals), which allows you to change its color.

Also, an important characteristic of any wire is its diameter. Hand-made uses a wire with a diameter of 0.2 to 2.0 mm.

What do you need to have to work with wire?

Even despite the fact that today there are a large number of special devices and devices, working with wire can hardly be called simple. Indeed, in order to create the simplest jewelry, the master needs to have at hand:

• Pliers
• Side cutters
• Round nose pliers
• Anvil
• Spring winding device
• Hammer
• and Jig-Wig (plate with rows of holes and special attachments of various diameters)

Each of the aforementioned tools needs to be used correctly. And this, of course, takes time. Therefore, you should not expect that everything will work out the first time. Nevertheless, the presence of such difficulties does not mean that wire is an unpopular material among needlewomen. On the contrary, it enjoys special attention among hand-made masters, because it makes it possible to create complex, exclusive jewelry, which has no analogues.

Wire jewelry

Well, now let's get down to the most interesting and tell you what you can create from wire. First of all, these are, of course, earrings, bracelets, rings and all kinds of pendant necklaces. The variety of weaving techniques, as well as their combination with bright stones and other decorative elements, allows you to create a large variety of women's jewelry.

All of them differ in style of design, so they can be selected for a wide variety of occasions.

This is how, for example, they might look like earrings:

Most of them have a complex curled shape. Some are made in the form of small studs, while others, on the contrary, are made in the form of large and massive earrings. Here are some examples:

As already mentioned, chains and pendants are often made from wire. Chains can have completely different shapes and diameters, which completely depends on the chosen weaving technique. In addition, needlewomen often like to complement them with extraordinary shaped pendants, which together looks pretty and rather original.

As for pendants, then they can either completely consist of wire, or represent a cabochon braided by it. The choice of one or another or a pendant completely depends on the imagination of the master and the materials at his disposal.

If desired, you can also make full-fledged wire from the wire jewelry sets... Below is a video tutorial on how this is done in practice. In the course of it, you can see what it takes for a master to create with his own hands even a seemingly very elementary decoration:

Wire rings:

However, do not assume that the wire is no longer good for anything. Everything is possible in the world of handmade. Therefore, in many homes you can see wicker trees, stands, candlesticks, bottle holders, decorative figurines and many other wire products.

Alternatively, it can be so cute butterflies and dragonflies:

All of them fit perfectly into the modern interior, and can also be selected for home decoration, decorated in any other style.

You can add originality and charm to any hairstyle with the help of jewelry made with your own hands from beads, wire, ribbons, lace, beads and other materials at hand. Decorate with hairpins, hairpins or hair combs, you can create an exclusive styling for an evening festive event, or diversify your daily hairstyles.

This requires a little free time, a set of necessary materials and a little bit of imagination. A sketch of the desired decoration can be done on paper, or simply in your imagination. As you make your product, you can try experimenting with different options for different materials and additions until you get the best result.

An ordinary plastic or metal hair hoop can "pacify" unruly curls of hair or bangs. But with your own hands it is not difficult to make it an excellent decoration by using satin or silk ribbons, beads and wire for this purpose. You can make flowers from ribbons and weave a decorative braid, and embroider the field of the rim and its edges with beads, or place it in the center.

To decorate the hoop you need:

• satin or silk ribbons;
• fast drying glue;
• wire or fishing line;
• beads of the desired color and size;
• plastic standard bezel, wide or narrow (optional).

At the beginning of work, you need to stick small pieces of tape on the ends of the hoop from the inside. To create the main background of the rim, you can take a ribbon made of guipure, lace or satin, up to 3 cm wide. For making floral decorations, you can take a ribbon wider, the wider the ribbon - the larger the diameter of the flower. You will also need a narrow ribbon on the pigtail.

Performance:

1. Tightly wrap the hoop with tape at an angle of 45 degrees, slightly overlapping the edge of the previous strip, leaving 1 cm of tape at the beginning and end of the rim. Tuck the ends of the tape and sew to the previously pasted pieces of tape from the inside, securing the basis of the future decor in this way.
2. Weave a pigtail of the required length, fix it along the hoop with glue, tuck the ends inward and glue.
3. In the center of the ribbon braid, glue or sew on beads at the same distance from each other. String the beads onto the wire and secure the ends along the edges of the rim.
4. Make a flower from a ribbon or lace by collecting one side of a similar braid on a thread and pulling it along the thread until a flower is formed, then stitching through the base plane of the workpiece.
5. You can sew 1 or more beads into the center of the flower and fix the flower on the hoop in the desired location with glue.

Such a design of the rim does not require much effort or material costs and will bring a lot of positive emotions.

Vintage beaded wedding decoration

A vintage wedding hair ornament with your own hands made of beads and wire is not difficult to make at home, after spending a little time. The vintage style includes pastel colors of pale pinks, blues and yellows, as well as pearls and whites. Accessories for such jewelry must be selected in such tones. You can weave a bridal wreath, tiara, crown, or twig.

To make a hair wreath you will need:

• silver wire;
• beads of pearls or glass beads of pale colors;
• colorless, fast drying glue;
• thin metal bezel.

The headband will be the base for the wreath and then you can attach the veil to it.

For any decoration, at first it is better to draw on paper an approximate sample of the future product.

Performance:

1. Cut the wire into pieces of 10-15 cm for the branches of the wreath and put on several beads on each, you can have different sizes. Then, scroll each bead around the axis several times, thus creating legs for each separately, of different lengths.
2. Having thus secured all the beads in the middle of the piece of wire, twist the edges of the wire together in the same way. The result is a small twig with several beads. The more such blanks there are, the more magnificent the wreath will turn out.
3. Fasten the workpiece with beads on the rim, forming the arrangement and inclination of the branches at different heights and in different directions. Clamp the bases of the legs well on the rim and apply a drop of glue to the attachment point of each workpiece.

From the same blanks, you can make a wedding boutonniere by tying together several branches with a white, satin ribbon in the form of a bow.

Beaded wedding hairpins

Hairpins for the bride's hairstyle are decorated with a similar method and from the same materials. The legs of the twigs with beads are fixed at the bend of the hairpin. On 1 hairpin, you can screw on several branches or beads, the legs of the blanks can be made shorter and the number of beads on a branch can be reduced. You can make a flower from beads by combining different shades and using beads.

DIY hair accessory made of beads and wire can be worn both on holidays and in everyday life.

Another option for decorating hairpins is to make a flower from braid, or a narrow ribbon, and sew a bead into the center of the flower. Then fix the workpiece on the hairpin.

Comb with rhinestones for a wedding

A comb is often used to style the long hair of a wedding hairstyle, with a variety of decorative options. The comb, with which the short veil is fixed, or in the form of a hairpin in the hair, looks spectacular. Rhinestones have 2 through holes for fastening. To decorate the comb with large rhinestones, the wire must be taken with a thickness of 0.4 mm.

Performance:

1. Pull the wire through the top row of rhinestone holes, form a pattern, or part of it, then pull the wire through the bottom holes.
2. Attach at the same time to the top of the comb, braiding over the teeth of the comb.
3. Wrap the rhinestones gathered in a pattern with a wire along the entire length of the comb and twist the ends of the wire with round-nose pliers, cut and bend the sharp ends.

The second way to decorate a comb with rhinestones is to sew the adornment onto dense fabric or leather and glue it to the comb, attach it with wire or threads.

Hairpins with flowers from foamiran

Hair jewelry can be made with your own hands not only from beads and wire, including wedding ones, but also from floral elements made from foamiran. One of the accessories will be a hairpin with a lush, white rose, or a few smaller flowers.

It is not difficult to make jewelry, since foamiran takes on well and keeps its given shape, does not lose color under the influence of water and products made from it are very light.

To create a hair clip you need:

• foamiran of the desired color;
• glue "Second";
• scissors;
• cardboard;
• thin wire;
• a few small beads or crystals;
• candle or lighter;
• a hairpin or clip on which the flower will be attached.

Foamiran needs two colors - light or white for the flower itself and green for the leaves.

Performance:

1. The template for flower petals and leaves must be cut out of cardboard, depending on the size of the desired flower.
2. On a sheet of material with a toothpick, outline 8 blanks with 4 petals each and cut out, forming a wavy edge.
3. Put all the finished petals in a pile, twist slightly so that they are slightly rounded and easier to assemble into a flower.
4. Each petal must be held over a candle or lighter and with your fingers squeeze out the heated part a little, round it off, and squeeze the bottom of the petal a little.
5. From beads and wire, make several stamens for each flower, twist the bases of the stamen legs together.
6. Collect all the petals around the stamens, superimposing and slightly shifting in a circle. Each part must be glued at the base, lightly pressing against the previous one.
7. From green foamiran, cut a cup for a rose from 4-5 leaves, slightly roll the tips to the outside, pierce it in the center with a toothpick and put it on the base of the flower, after dropping glue.
8. Cut out the leaves and attach to the stem as well.
9. Fix the flower on the hairpin with glue.

Foamiran wreath around the bundle

Foamiran products are practical and lightweight; if necessary, they can be washed or tinted with a different color. From different shades of material, a beautiful wreath is obtained around the bunch, if the legs of the flowers are fixed on a metal rim, or a wire circle and pinned to the hair.

Pearl invisible

DIY hair jewelry made of beads and wire is very easy to make from invisible ones. Pearl bobbins can be used for daily styling alone or in combination with other hair ornaments. You need to take a piece of wire, fix it at the beginning of the invisibility, string a bead, wrap the wire around the top of the hairpin, tighten and repeat the operation until the end of the invisibility.

Then fasten the end of the wire, bite off and you can thread the end of the wire into the last bead. The silver wire will not be visible against the pearl background. In the same way, you can make beads on legs by scrolling each one around the axis several times. You will get a more voluminous decoration.

Red beaded wreath

For a wreath of beads, you need to make a ring to the size of a circle from a thick soft wire. Cut 25-30 pieces of thin wire, 10-12 cm long. String the beads into pieces of several pieces and prepare twigs and flowers on long legs from them. Then, with ready-made twigs, braid the rim of the wire like weaving a wreath and fix it.

Carefully wrap the gaps between the legs on the rim with a satin ribbon, which can be tied into a bow, or cut and neatly sewn.

Dragonfly on a stiletto

You can beautifully decorate hairpins with wire beads or dragonfly-shaped beads. To do this, you need colored and white beads, a piece of wire about 1 m. The weaving of a dragonfly begins with the body of the product, to which then 1 or 2 rows of wings are attached, if desired. For the eyes of a dragonfly, you need 2 beads of a larger size and a dark color.

Performance:

1. Large beads for the eyes are put on a 60 cm piece of wire, a small bead and three beads of the body of the future dragonfly are inserted between them.
2. Place the beads for the eyes in the center of the segment, and the next 3 in the back, creating the beginning of the body. Pass the other end of the wire through the same 3 beads and pull up.
3. In the next row, put 4 beads, also passing both ends of the wire through these beads. In this way, weave the body of the workpiece, reducing the number of beads towards the end of the body.
4. Pass a piece of wire through the 3rd row and collect 25 beads from 2 sides to form the wings, stretch the ends of the wire through the next row of the body, tighten and fasten.
5. In the same way, make the second pair of wings.
6. Attach the finished product to the hairpin using a wire.

Lily of satin ribbons on a hairpin

It is not difficult to decorate a hairpin with a lily flower made from a satin ribbon with your own hands. To do this, a cardboard sample of a flower petal is cut out, blanks from the ribbon are cut along it, the edges of the petals are processed over the candle. To shape the workpiece, hold it over the flame and shape it with your fingers.

On the seamy side of the petal, apply longitudinal stripes, collect and glue the bases of the petals, attach the finished stamens. Glue a circle of fabric on the base of the finished flower and glue it with a hairpin.

Comb with a sprig of beads

To decorate the comb with a beautiful sprig of beads, you need a wire 0.2 mm thick and the beads themselves. The wire is fixed on the base of the comb, beads are strung on it, and a leg is made by scrolling each bead around its axis.

Beads on legs of different lengths form a twig.

Make several such branches of different heights and different configurations on the comb. Put the resulting blanks in the form of a twig.

Chamomile from ribbons and beads on the rim

A regular headband can be decorated with daisies made of satin ribbons and beads. To do this, you need to wrap the bezel with tape and stick the made daisies. The flower is made from a narrow satin ribbon, cutting the strip into 28 pieces, the length of which is 8 cm. Fold the pieces in half and melt them over a candle flame. Prepare 3 felt mugs for each flower.

Glue 14 blanks of petals on the felt part in a circle, glue another row of ribbon petals on top. Glue a felt circle into the center of the blank, sew several yellow beads to it, or cover it with yellow beads. Glue the finished flower to the hoop, fix the inside with a circle of felt with glue.

Headband with roses from foamiran

You can decorate the headband with foamiran roses, making flowers smaller than for a hair clip. Ready-made roses are glued from the center of the rim to the ends, leaves from green foamiran are glued under the flowers.

Foamiran forget-me-not wreath

A wreath of forget-me-nots can be woven from individual flowers or from collected in bouquets. Petal blanks are cut with a curly hole punch or by hand. You can round off the petals by attaching them to a not very hot iron.

Put the rims of the petals on the wire stems, fixing them in the center with a bead or a drop of glue. Twist the stems around the rim, or weave like a regular wreath of fresh flowers.

Headband with flowers from ribbons and beads

There are many options for decorating a hoop with satin ribbon flowers, which can be made large and small, or combined. Filling the center of the flower with beads allows you to hide the places where the petals are glued. You can diversify the jewelry by adding beaded twigs between flowers, or using glue to glue sparkling beads on the surface of flowers and leaves.

This decoration creates the effect of dew on the flowers.

All the materials you need to create hair jewelry are readily available at handicraft stores. These accessories are useful for schoolgirls of any age, for older girls and adult women. A handmade wedding accessory made of ribbons, foamiran or beads and wire will remain a pleasant memory of an important event.

Video: DIY hair decoration made of beads and wire

We make hair jewelry with our own hands from beads and wire:

Learn how to make a comb out of wire in the video:

Key pendants made of wire with stones

Wire is a durable and malleable material that can take any shape. The unique properties of thin metal threads were successfully used by ancient jewelers, who weaved filigree patterns, creating jewelry of amazing beauty. The material holds its shape well, has a noble luster, is this not a paradise for the modern jewelry industry? Modern craftsmen can, as if by magic, turn a skein of ordinary wire into spectacular and stylish accessories. Do you want to learn how to make exclusive wire jewelry with your own hands? Then we propose to master the simple alphabet of mastery, and, using the example of master classes, learn how to create real miracles.

Basics for beginners

The names of the ancient jewelers, who successfully embodied the fantasy in wire jewelry, are unknown to contemporaries. The art form "wire wrap", which means "wire wrapping", went down in history under the name of the craftsman Alexander Calder. From an early age, the master learned to weave original products. He made the first crafts as a gift to relatives and friends, and later an unusual hobby turned into a lifelong business. Distinctive, original, openwork work inspired many to accomplish creative feats.

Alexander Calder and his work

The main principle of such needlework is to use thick wire for the base and thinner and more flexible for braiding products.

Wire wrap pendant

You can add beads, stones, all kinds of decor to weaving. By the way, if the wire is braided from above with a thin thread, then such a needlework is called a ganutel. To learn how to create beautiful wire accessories, you need to know a few simple secrets:

• Selection of tools. The job requires a small arsenal of tools. Beginners will need round nose pliers, several types of pointed, nylon, rectangular-tipped pliers, needle file, or sandpaper. To create complex weaves of patterns, experienced craftsmen use anvils, a spade and a hammer, a crossbar and a drawing board in their work.
• So that in the end homemade jewelry made of wire has, as they say, "shop polish", you can use sulfuric liver to cover. With this material, products from copper, aluminum, brass, bronze wire are patted to create a noble effect of antiquity.
• It is enough to master the creation of several elements to make an author's masterpiece. The simplest elements are the spring, balls and rings.

Wire tools

To make a spring, it is enough to wind a piece of wire around the crossbar. Such an element can be used for braiding or as an independent decorative piece. To make a ball, you need a burner or gas burner. To get the droplets perfectly even, you need a borax. By the way, you can create new interesting elements from the ball using a hammer and an anvil. Rings are connecting parts that are indispensable in creating beads or bracelets. It is enough to wind the wire on the crossbar, "bite off" the excess and remove the perfectly even ring. The diameter of the ring depends on the thickness of the bolt. Having received the necessary knowledge, having prepared the necessary tools and materials, you can start the creative process.

Using available tools for working with wire

Jewelry making workshops

Unusual jewelry made of copper wire, bronze or brass, can take on a variety of shapes. For example, you can make original hair jewelry, rings and bracelets, openwork necklaces or pendants. Beginners should not worry about the lack of practice and experience in creative work, a simple and detailed master class will help in creating an author's collection of luxury jewelry.

Copper wire earrings with turquoise

Hair ornaments

On the eve of graduation parties, such a master class is especially relevant, because many girls are in a creative search for their image. I would like to be the brightest, most beautiful, exclusive. There is a sure way to create an unusual look by decorating a stylish hairstyle with a hand made hair clip in the shape of a flower with a graceful curl. The work algorithm is as follows:

1. On a piece of paper, we will draw a sketch of the future product, schematically marking the location of the beads and the pattern on it.
2. We start work with a turn, smoothly moving to the outer circle of the product. Place the end in a spiral that is slightly higher. As a result, you should get a round element with antennae. We work with round-nose pliers continuously to make the product neat.
3. We twist the place where the two curls touched with a few more tight turns, weave the beads, and then weave the base of the hairpin with a thin wire.

Stylish hair accessory

To make it clearer for novice craftswomen, we offer an auxiliary scheme:

• six curls between beads;
• ten curls between large elements;
• eight curls between smaller elements.

Simple hairstyle with bold embellishment

To make the hair clip delicate and have a finished look, we string small beads at the beginning of weaving, and large beads can be woven into the middle.

In a similar way, you can make not only a hairpin. There is an original way to decorate hairpins - just braid with a thin metal thread, adding a few beads or beads to the weaving.

Delicate hair jewelry based on hairpin

Luxury pendant

Copper wire has high ductility, it can be easily cut, heated, soldered. Due to its unique properties, this budget and externally beautiful material has become a favorite in needlework. What can be done from copper wire with your own hands? Yes, everything that your imagination tells you - bracelets, rings, pendants and much more. Luxurious wire pendant master class:

1. We will prepare tools and materials. You will need a coil of copper wire with a cross section of 0.1 mm to 1 mm, pearl beads, wire cutters, round nose pliers and a drill.
2. The main part of the product consists of two pieces, 16 cm long and 1 mm thick. We make turns with a thin copper thread of 0.1 mm around thicker segments, then we bend the two braided parts into a ring. Bend the remaining ends with a snail.
3. Wrap a thin piece on a piece 0.3 mm thick, the length of the base is 12 cm. We will thread its end between the braided parts, fix it. We make a small break, wrap the frame with it several times.
4. In the upper part, we make the same kink, and we wind the remaining part on the base. We make a snail from a wire 1 mm thick, we attach it to one and the other break.
5. A thin wire thread is attached to the upper part, pearls are strung on it, the ends of the wires braid the workpiece, and bite off the excess with pliers. So add all the prepared beads.

Copper wire pendant with pearls

To make the product have an elegant glossy shine, polish the surface of the pendant with a drill, and then rinse it under warm water. Luxurious, intricate, in the spirit of oriental jewelry of the Magnificent Century, the pendant is ready to adorn any lady's outfit.

Cute heart

There are many workshops on making stylish wire jewelry, through which you can learn how to create great author's collections. But a few simple tips will help newbies get the job done at a decent level:

• To avoid patinating the wire, non-oxidizing materials should be used. For durability, you can varnish the surface.
• After the wire has been heated on the fire, rub it with baby cream while it is still warm, and then wash it off with soap and water. Patina - the effect, as they say, on an amateur. Many craftsmen prefer to cover jewelry with gold, silver or bronze paint, and open it with varnish on top to shine.
• Be sure to draw a diagram and a sketch of the jewelry before starting work. Working with wire is delicate and filigree, it requires attention and perseverance. Seeing a wire jewelry that you want to repeat with your own hands, divide it mentally into its components, it will be easier to work this way.

Each master has his own imagination, creative ideas and vision of the future masterpiece. All kinds of decor, such as beads, beads, stones and even buttons, are ideally combined with wire. For beginners, for practice, you can use ready-made master classes, and in the process of weaving, supplement the idea with your own details.

Funny cat earrings
Copper bracelets for every taste

Video of a master class on making earrings from copper wire with turquoise

Video of a master class on making a rainbow heart