Patterns - from simple to complex. Women's dress of a straight silhouette Modeling a dress for the type of figure "Inverted triangle"

04.09.2021 Cool programs

It is the dress that can make you more feminine and beautiful, convey your romantic or sensual mood, emphasize the dignity of your figure and hide flaws, and visually make your figure more slender. A dress can save you in a situation where there is no time to match a blouse to a skirt or trousers, a jacket, etc. Due to the variety of styles, a dress can be used to create a variety of images: from business to sexy. The main thing is to choose the right style of dress for your figure.

MODELING DRESS FOR THE TYPE OF THE FIGURE "TRIANGLE" (PEAR)

The pear-shaped figure is very feminine, but sometimes it brings the owner some difficulties when choosing a ready-made dress due to the difference in the girth of the hips and chest. Don't be upset. First, let's figure out which style to choose. We narrow the bottom and focus on the upper part: a boat-shaped neckline, a large collar, a neckline, a bright print in the upper part of the dress, the bottom can be slightly flared, do not forget about the use of contrast inserts running along the dress and visually modeling the figure, as well as a little High waist, heels and tights to match the shoes will make you slimmer. We try to avoid decorations in the area of hips, patch pockets, draperies, cross stripes and large prints.

For an example of modeling, we will choose a simple sheath dress created on a pattern based on an adjacent silhouette. The style is interesting in that the model lines that form the silhouette are the best and most advantageous way to demonstrate the female figure of the lower type. Dark inserts running along the side seams will help to visually hide the width of the hips, and the white, expanding silhouette at the top will highlight the slimmer silhouette. But, here it is impossible to be too clever with excessive narrowing of the skirt and if the difference between the girths of the chest and hips is large, it is better to widen the skirt a little towards the bottom.

Modeling. On the details of the pattern of the back and the shelf, draw model lines of reliefs passing from the armholes to the bottom of the dress through the waist darts, on the back, transfer part of the solution to the middle line of the back, for the best fit in this area. Open bust dart in armhole. It remains only to outline the allowance for the slot. If the difference between the waist and hip girth is large and the solutions of the darts for fitting are more than 3-3.5 cm each, the dart must be split into two, otherwise ugly creases in the waist area will appear in the finished product.

In the second version of modeling, we propose to expand the skirt to the bottom, make it the so-called A-shaped silhouette, you can also make the dress cut-off at the waist.

Modeling a dress for the "Inverted triangle" body type

Your strong point is narrow hips and long, slender legs. We focus on them. All decor, bright prints - down to the skirt. Reducing the width of the shoulders, here we will be helped by raglan sleeves, or the absence of sleeves in all summer clothes, a dress with a strap on one shoulder, a Greek silhouette, a loose tunic, a dress with a tulip skirt can become a lifesaver and be loved in your wardrobe. You can afford to wear fluffy wide skirts, skirts or trousers with a peplum, straight cut dresses, but not too voluminous and wide, with vertical seams or trim.

As an example, we will analyze the modeling of a pattern of a simple dress suitable for this type of figure. The model has a fitted sleeveless bodice and a tulip skirt that adds volume to the hips. The dress is cut-off along the waist line, there are two opposite folds on the front panel of the skirt, and a slit is made on the back panel of the skirt.

We begin modeling by applying the basic pattern of the adjacent silhouette to the relief lines on the details of the back and the shelf (if you want a greater fit or the fabric is knitted, you can use the base pattern of the adjacent silhouette). We will arrange the thallium darts on the front panel of the skirt into folds - cut the skirt part from the end of the darts vertically downwards, move the parts apart so that in the upper part we obtain a solution approximately equal to 6-8 cm to form deep counter folds. At the bottom, keep the volume of the skirt in its original form.

Modeling a dress for the "Hourglass" figure type

The "hourglass" type of figure is the most feminine, it is he who is rightfully considered a standard for imitation and we try to bring our figure closer to it, at least with the help of clothes. Lucky women with this type of physique. The main advice is to focus on the waist, so you will further emphasize your femininity and sexuality. Neckline, bows, pencil skirts, stilettos - this is your win-win image.

Let's simulate such a simple dress, in two versions.

The model is quite simple at first glance, but with the right choice of fabric and accessories, it is very effective. For modeling, we need a pattern for the base of an adjacent silhouette and a pattern for a sleeve. Cut-off dress along the waist line, the skirt is widened to the bottom. The darts for fitting the chest are transferred into the neckline: in the first version, the darts from the neck are stitched with an allowance outward, a small sleeve with a fold, in the second version, the darts on the chest are distributed in folds extending from the neckline, there are no sleeves.

Modeling. 1 step - on the details of the back, the dart for the roundness of the shoulder can be neglected, because the neckline of the back is deep enough and widened, but the size of the solution must be removed from the length of the shoulder so as not to upset the balance. For the convenience of modeling, we will transfer the dart on the shelf to the armhole. Cut the details of the skirt pattern lengthwise from the darts down.

Next, step 2 of the simulation. Draw a new line for the neckline according to the sketch. We will transfer the tallium dart on the shelf to the neckline, and we will also transfer the dart from the armhole there. When designing a detachable adjacent silhouette, the pattern of the shelf part must be lowered in the waist area by 1 cm, this will give a better fit and prevent it from jerking when finished. Skirt. We connect the parts of the pattern obtained after cutting the details of the skirt, so that the darts open to the bottom. Correct the side cuts and the bottom of the product.

Sleeve modeling. First, let's shorten the length to the required one. With the help of vertical cuts going from the ridge to the bottom of the part, and the subsequent spreading of the parts of the pattern, design the opposite fold.

In the second version of the dress, the darts on the shelf are transferred into folds extending from the neckline. We will consider modeling below.

Modeling a dress for the "Oval" shape type (apple)

The figure is an oval (apple). In the era of Rubens, women with this type of figure were the ideal of perfection. The silhouette is visually close in shape to the letter "o". The strategy in choosing the right clothes will be to emphasize, accentuate the waist, this can be done by choosing a dress that expands slightly to the bottom, as well as the use of belts, decorative inserts that make the waist visually narrower, the top of the dress should be slightly widened, for example, use a V-neck, collars ... Sheath dresses, smells, low waist, A-line dresses will suit you.

As an example, let's take a look at this dress. It is interesting in that it has a contrasting decorative line running along the dress. Visually, this is very stretching the silhouette and slimming. In addition, the dress is loose in the waist area and slightly widens towards the bottom, which is undoubtedly a plus for this type of figure. Clear cut lines and the choice of fabric that keeps its shape, create the desired image and collect the figure as a whole. To model this model, we will use a basic sewing pattern of an adjacent silhouette for a better fit.

Modeling. Straighten the side cuts of the parts, because the dress has a straight free silhouette. Move the dart on the breast bulge to the side seam and outline the relief line. We will shorten the pattern of the sleeve detail just above the elbow.

In the received details, outline the front yoke and cut it off.

Modeling a dress for the "Rectangle" shape type

The female figure is a rectangle type. It is the most typical for modern models. Therefore, when buying ready-made clothes, usually there are no problems, but sometimes you really want something special! This is where our modeling tips and sewing patterns can come in handy! Women with this body type do not need to try to look like Merlin Monroe or Sophia Loren, this is not your style. Dresses and clothes in the image of Twiggy, Kate Moss, Nicole Kidman and Coco Chanel herself are what we are striving for.

We chose the dress for the modeling lesson just right. We need a pattern this time of a straight silhouette. Sleeveless dress, loose cut with a counter fold going down from the neckline, fastened at the bottom to give the product an oval silhouette. Pockets can be made in the side seams.

Modeling takes place on the basic pattern-based dress of a straight silhouette, without darts. To begin with, we will get rid of the dart on the back, on the shelf we will complete the depth of the fold, setting aside a distance of 12-15 cm from the middle of the part.Please note that one opposite fold is laid on top of the dress, while at the bottom there are two of them - one-sided, the depths are laid towards the side seams. The side seam lines are designed to create an oval silhouette. This model should be long above the knee, otherwise there may be excessive narrowing at the bottom.

Well, our lesson has come to an end, we have learned how to create simple dress patterns based on the basic pattern, such that beginners can handle the modeling and sewing, and talked about the types of figures. I think now you can please yourself with a new thing. Good luck and creative mood!

Fashion designer

Hello dear readers!

The goal of our tutorial is to learn how to model dresses based on a basic pattern. The kind that beginners can handle. In addition, we will analyze simple styles of dresses suitable for the type of your figure, on the example of which you can, if you want, create more complex models, enriching them with details and using a combination of fabric textures and colors.

Sometimes they write to us: “It's very difficult for me to buy ready-made clothes, my figure is an inverted triangle, besides, I have a very decent bust and a wide chest, that is, my chest volume is 102 cm - this is a very big disappointment for me. I have the opportunity to purchase any thing for myself, because the rest of the parameters of the figure go to 44-46 sizes ... What style can you choose? "

Of course, having parameters that do not fit into the framework of standards, it is difficult to find something in the store to your liking, and sometimes going for a new thing turns into one frustration. Well, there is no need to be sad, especially to a person who has at least a little experience in sewing clothes. And with patterns, simple, such that even a novice tailor can create, we will try to help. It's no secret that everyone in the world sews dresses using one universal pattern, modifying and modeling it. Having in your arsenal such an invaluable tool, the creation of which on our website does not take much time, you will be able to dress according to your taste and image invented by you.

First, what is a basic pattern? This is a pattern without model features, roughly speaking, it is a human figure made in a two-dimensional plane. The pattern has a different degree of fitting, depending on what type of clothing will be designed in the future - top (coat, jacket) or light (dress, blouse, corset, etc.), and differs in the amount of increase in freedom. Therefore, on our website you will find and, as well, they will differ in increments, which is very important. By the way, on our site, along with the possibility of building a basic pattern according to individual sizes, there are a number of already models of dresses that are absolutely different in cut and suitable for women of different types of figures. You can also use them, especially since each size is presented in three heights, and this is very important for a good fit of the finished product.

So, having a base pattern in our hands, we can proceed directly to modeling. First, let's choose a dress model. This point must be treated very responsibly, objectively assessing your appearance, figure, image as a whole. After all, it is no secret that we are all different people, each of us has its own individual figure, which sometimes does not fit into the so-called "ideal framework", especially since this very ideal is different in every time interval, it changes according to fashion trends. Let's not adjust ourselves to the standards and love our individuality. All female figures are conventionally divided into several body types, and each of us belongs to one type or another to a greater or lesser extent.

Illustration from the site https://high-fashion21.ru

Modeling a dress for the shape type "Triangle" (pear)

For an example of modeling, we will choose a simple sheath dress created on. The style is interesting in that the model lines that form the silhouette are the best and most advantageous way to demonstrate the female figure of the lower type. Dark inserts running along the side seams will help to visually hide the width of the hips, and the white, expanding silhouette at the top will highlight the slimmer silhouette. But, here it is impossible to be too clever with excessive narrowing of the skirt and if the difference between the girths of the chest and hips is large, it is better to widen the skirt a little towards the bottom.

Modeling. On the details of the pattern of the back and the shelf, draw model lines of reliefs passing from the armholes to the bottom of the dress through the waist darts, on the back, transfer part of the solution to the middle line of the back, for the best fit in this area. Open the bust dart in the armhole, read more about the transfer of darts here. It remains only to outline the allowance for the slot. If the difference between the waist and hip girth is large and the solutions of the darts for fitting are more than 3-3.5 cm each, the dart must be split into two, otherwise ugly creases in the waist area will appear in the finished product.

In the second version of modeling, we propose to expand the skirt to the bottom, make it the so-called A-silhouette, you can also make the dress cut-off at the waist.

Modeling a dress for the "Inverted triangle" body type

Your strong point is narrow hips and long, slender legs. We focus on them. All decor, bright prints - down to the skirt. Reducing the width of the shoulders, here raglan sleeves will help us, or the absence of sleeves at all in summer clothes, a dress with a strap on one shoulder, a Greek silhouette, a loose tunic, a dress with a tulip skirt can become a lifesaver and be loved in your wardrobe. You can afford to wear fluffy wide skirts, skirts or trousers with a peplum, straight cut dresses, but not too voluminous and wide, with vertical seams or trim.

We start modeling by applying to the details of the backrest and shelf. embossed lines (if you want a greater fit or the fabric is knitted, you can use the base pattern of the adjacent silhouette). We will arrange the thallium darts on the front panel of the skirt into folds - cut the skirt part from the end of the darts vertically downwards, move the parts apart so that in the upper part we obtain a solution approximately equal to 6-8 cm to form deep counter folds. At the bottom, keep the volume of the skirt in its original form.

Modeling a dress for the "Hourglass" figure type

Let's simulate such a simple dress, in two versions.

The model is quite simple at first glance, but with the right choice of fabric and accessories, it is very effective.For modeling we need and ... Cut-off dress along the waist line, the skirt is widened to the bottom. The darts for fitting the chest are transferred into the neckline: in the first version, the darts from the neck are stitched with an allowance outward, a small sleeve with a fold, in the second version, the darts on the chest are distributed in folds extending from the neckline, there are no sleeves.

Next, step 2 of the simulation. Draw a new line for the neckline according to the sketch. We will transfer the tallium dart on the shelf to the neckline, and we will also transfer the dart from the armhole there. Learn more about translating darts. When designing a detachable adjacent silhouette, the pattern of the shelf part must be lowered in the waist area by 1 cm, this will give a better fit and prevent it from jerking when finished. Skirt. We connect the parts of the pattern obtained after cutting the details of the skirt, so that the darts open to the bottom. Correct the side cuts and the bottom of the product.

Sleeve modeling. The pattern of the base of the sleeve can be taken on ours. First, let's shorten the length to the required one. With the help of vertical cuts going from the ridge to the bottom of the part, and the subsequent spreading of the parts of the pattern, design the opposite fold.

More sleeve modeling can be found in this

In the second version of the dress, the darts on the shelf are transferred into folds extending from the neckline. We will consider modeling below.

Modeling a dress for the "Oval" shape type (apple)

The figure is an oval (apple). In the era of Rubens, women with this type of figure were the ideal of perfection. The silhouette is visually close in shape to the letter "o". The strategy in choosing the right clothes will be to emphasize, accentuate the waist, this can be done by choosing a dress that slightly expands to the bottom, as well as the use of belts, decorative inserts that make the waist visually narrower, the top of the dress should be slightly expanded, for example, use a V-neck, collars ... Sheath dresses, smells, low waist, A-line dresses will suit you.

As an example, let's take a look at this dress. It is interesting because it has a contrasting decorative line running along the dress. Visually, this is very stretching the silhouette and slimming. In addition, the dress is loose in the waist area and slightly widens towards the bottom, which is undoubtedly a plus for this type of figure. Clear cut lines and the choice of fabric that keeps its shape, create the desired image and collect the figure as a whole. To simulate this model, we will use , for a better fit.

In the received details, outline the front yoke and cut it off.

Modeling a dress for the "Rectangle" shape type

The female figure is a rectangle type. It is the most typical for modern models. Therefore, when buying ready-made clothes, usually there are no problems, but sometimes you really want something special! This is where our modeling tips and patterns can come in handy!)) Women with this body type do not need to try to look like Merlin Monroe or Sophia Loren, this is not your style. Dresses and clothes in the image of Twiggy, Kate Moss, Nicole Kidman and Coco Chanel herself are what we are striving for.

We chose the dress for the modeling lesson just right. We need the pattern this time. Sleeveless dress, loose cut with a counter fold going down from the neckline, fastened at the bottom to give the product an oval silhouette. Pockets can be made in the side seams.

Long-cut, but very comfortable, loose-fitting dress is guaranteed to cheer up its owner. And this is not only thanks to the silhouette, wide sleeves and collar, but also to the dazzling white color of the fabric from which it is sewn. Be sure to sew such a dress for yourself, and you will always have something to wear!

Free cut dress pattern

Rice. 1. Free-cut dress - in front

Rice. 2. Free-cut dress - back

The dress pattern is modeled by. The silhouette of the dress is free, therefore, when constructing the basic pattern of the dress, the increase in freedom of fitting is 3 cm.

Modeling dress patterns

Modeling the front of the dress

Rice. 3. Modeling the front of the dress with a free cut

Transfer the bust dart on the front half of the dress to the armhole. Remove the trolley dart.

Rice. 4. Modeling sleeves, yokes and collar

Deepen the neckline by 1 cm, set aside 2 cm along the shoulder line, draw a new line for the front neckline.

Raise the shoulder line by 2 cm and lengthen the shoulder to 20 cm. Extend the shoulder line and set aside the length of the sleeve about 35-40 cm. Draw the line of the seam of the sleeve and the line of the bottom of the sleeve at a right angle. The width of the half sleeve at the bottom is 15 cm.

Build a front yoke 4 cm wide. Cut the yoke and cut it out separately. Draw a side line as shown in fig. 4, having narrowed the dress to the bottom by 2 cm. The length of the dress from the waist is about 55 cm.

Modeling the pattern of the back of the dress

Rice. 5. Free-cut dress - back modeling

The back pattern is modeled on the basis of the front pattern. Remove the trolley dart. Deepen the neck of the back by 1 cm. Set aside 2 cm along the shoulder. Draw a new line for the neck of the back.

Place the front pattern on the back pattern, reshoot the sleeve and back side line as shown in fig. 5.

Collar pattern

Measure the length of the front and back necklines along the pattern. Draw a rectangle equal to ½ of the neckline of the dress and 9 cm wide (see Fig. 4). Set aside 2 cm from the left corner of the rectangle to the right, from the bottom left corner up and from the top right corner down.

Connect the resulting points, slightly rounding the top and bottom lines of the collar. Cut out the collar with a fold (2 parts).

Advice! The collar can also be cut into a rectangle with a fold at the top. In this case, the width of the part will be 14 cm (7 cm in finished form), the length is equal to the length of the neckline of the dress according to the pattern. In this case, the collar is cut along an oblique thread.

Dress cut details

Details of the dress are shown in Fig. 6.

For the dress you will need: 1.5 m of white jersey, 145 cm wide, thin thermal fabric for jersey, threads.

Cut out from the main fabric:

11. Backrest - 1 piece with a fold

12. Before - 1 piece with a fold

13. Front yoke - 2 parts

14. Sleeve - 2 pieces with a fold

15. Collar - 2 folds.

Cut out all details with allowances for seams and hem by 1.5 cm, allowances for the bottom of the dress and sleeves - 4 cm.

How to sew a dress

Sew the details of the yokes to the details of the front, overlap the allowances. Stitch the yokes from the front side at a distance of 0.7 cm from the seam.

Sew shoulder seams, sew on sleeves, process allowances. Stitch side seams, fold over the hem of the dress and sew with machine blind stitch.

Fold over allowances at the bottom of the sleeves and hem them with a machine blind stitch.

Duplicate the outer collar with a thin thermal fabric for knitwear, stitch along the short side, iron the allowances. Sew the second collar part (inner) on the short side, iron the allowances.

Fold both collars right sides, stitch along the top edge, turn out, sweep the top edge. Sew the collar into the neckline, sew in with an elastic overfill seam.

Your loose-fitting dress is ready! Wear it with pleasure and be happy!

Ready-made patterns are useful, but with them it is sometimes difficult to realize an unusual idea, your own idea and sew a dress “like in a magazine”. In this case, it is necessary to simulate a new drawing, taking the base one as a basis. This will allow you to sew the product according to your parameters.

Modeling a dress is the process of changing a finished drawing or creating a new one based on a visual image of clothing (from a magazine, from a catwalk). The style is reworked to suit the physique, so that the sewn item fits well and fits the build and body type. A striking example is the modification of a straight dress or a classic "case". On their base pattern, you can expand the hem, add sleeves, move the waistline, make additional darts if the difference between the waist and hips is large.

In all cases of modeling, the term "basic pattern" is used. This is a universal base-pattern, according to which a new one is created that meets the requirements and wishes of the master.

Individual products are modeled following the sequence of stages:

model development - adjusting the basic pattern or creating a new one;
design of parts and method of their connection;
taking measurements;
transferring measurements to paper, and then to matter.

latrika.com

Modeling techniques

There are several well-studied, "working" methods of creating individual things. Using one of them, you can easily model the product you need. The traditional way is "tattoo". This is an ancient technique by which a product is modeled and sewn on a mannequin or directly on a human figure. The tattoo is carried out with pins and "invisible".

An equally uncomplicated method is a dummy one. It allows you to process the shape of the finished product and display it in the desired size. For modeling, standardized patterns are used, they work on a base pattern or build a design structure. The method is widely used when trying on things when sewing.

The most common method is computational modeling. According to it, a pattern of the required size is created on the basis of a conventional-standard drawing. The drawing is built according to geometric calculations. There are several directions within the method:

proportional-calculated;
calculation and analytical;
settlement and graphic;
customer-oriented.

First of all, the famous method "according to Müller" is considered. It involves sewing things with a long back, middle chest and narrow hips. Also, the calculation method includes Lin Jacques's method for a conventionally standard figure with special tables for measurement. And the version developed in the Russian republican house of models. It is simple - you do not need formulas and time-consuming calculations to build patterns.

liveinternet.ru

Client-centered methodologies are based on the desire for individualization.

"Lyubax" - taking into account horizontal and vertical lines, setting the norm for figures of a certain type and choosing patterns, the value of which is adjusted according to the parameters of the body.
"Unimex" is the simplest, fastest sewing technique according to the characteristics of the body of a particular person.
"Genetics of a cut by G. Zlachevskaya" - sewing dresses according to the principle of "golden section".

Start modeling

Before modeling a summer, warm or evening dress, you need to measure the body parameters as accurately as possible and calculate the numbers for finalizing the base drawing. We must not forget about the increments for the freedom of fitting - they depend on the chosen silhouette, style and type of fabric (elastic, thin, dense).

If you are sewing a dress from a photo, you need to understand what kind of base you need. Then transfer its details to tracing paper using the standard sequence of actions.
Draw the main axis in your drawing - this is the middle line of the shelf. To build it, they are guided by the jugular fossa on the torso, at the center between the most prominent points of the chest, at the midpoints between the vertical lines of the structure.
Draw perpendiculars along the constructive points - these are the lines of the chest, hips, shoulders and waist (plus the knee if the dress is elongated).
Construct a baseline that takes into account the depth of the neck, the height of the hip and chest, and the knee line.

Having created a mesh, you can match the conditional dimensions with the real "dimensions". The base frame is constructed from measurements taken from the body. The more accurate they are, the better the item will fit. When measuring, you need to stand straight, do not slouch, do not suck in your stomach.

house-sirens.com.ua

Dart modeling options

Most often, in the process of changing the pattern, breast darts are transferred. The shape of the shoulders and chest is very individual, and you need to locate the point anew each time. The dart is transferred to the lower side corner of the bodice - at the intersection of the side cut and the waist line. The top of this corner must be connected to the bottom corner on the dart along the chest. You will get a line for "opening" the pattern. In this case, the original darts are closed and you can transfer an individual sketch to the fabric.

The dart on the chest can be moved below. To do this, in the drawing of the bodice, the waist dart (angle) is connected to the lower corner of the dart on the chest (it is designated by the top of G8). The top element closes, and the bottom one unfolds to the end. To transfer the dart to a cut on the side, you need to divide the base in two or three, depending on the style. The set point will be the beginning of a new element. It needs to be connected with a line to the top of G8, cut and closed. The modified template for tucking the side cut should end 1.5-2 cm from G8.

zakroyschik.ru

The basic bust dart can also be moved to other locations.

In the cut of the armholes. It is divided in two or three, and the dividing point is connected to G8 - you can make a curvilinear relief by outlining a smooth curve and closing the chest solution on the dart or corner, dropping the line from G8 to the waist.
Shoulder cut. It is also divided into 2 or 3 parts, from the resulting point a straight line is built up to the waist dart, and the chest is cut and closed.
Cut at the neck. Its line is divided in two or three, the points are connected to G8. And the connecting axle is cut and transferred - the cut will lie in soft gathers.
Center of the front panel (on gathered bodice). From G8, you need to build a perpendicular to the middle of the front, make a cut along it and transfer the dart, draping the assembly.
Armhole undercut. You will need to draw a perpendicular similar to the line from the previous paragraph, then fix the dart at the waist and part of the upper one (for example, with pins), and form the remaining solution into small assemblies.
Under the yoke from the armhole. The upper part of the bodice is cut completely (and not partly, as in the previous version) and a yoke is formed.

brandwomen.ru

Modeling dresses based on the "sheath" style

Often it is necessary to adjust the basis of a sheath dress when there is a strong difference in the girths at the waist and hips. For a pear-shaped figure, you can narrow the bottom on the basic pattern (as when sewing a pencil skirt), accentuate the shoulders and top. Contrast inserts, a boat neck, a large, voluminous collar or a decorated neckline will do. A slightly high waist also visually corrects the figure, but you need to be careful when narrowing the skirt. If the difference between the chest and hips is significant, the bottom should be slightly widened.

It should be remembered that:

model lines of reliefs run from the armholes to the very bottom along the darts at the waist;
the middle line of the back should fit well - transfer part of the solution to it;
if the difference between the hips and the waist is large, the solutions when fitting exceed 3.5 cm, the darts are divided into two, otherwise there will be ugly creases in the waist.

The skirt can be changed by making a cut-off waist. The "tulip" style is formed by two opposite folds along the front (from the end of the waist darts, the part is cut vertically downward), and a cut is made on the back of the panel. A cut-off dress with a flared skirt can be modeled by redesigning the front neckline. Next, you need to transfer the waist dart to the side, outline the skirt with a "half-sun" and make a neckline and an armhole on the back of the bodice, joining them with the front.

modnaya24.com

Modeling on straight dresses

On a straight or loose silhouette, you can model a style with an extension of the skirt along the bottom - A-shaped.

The side cuts are made straight, and the darts for the chest are transferred to the seam on the side. In detail, you need to outline the yoke on the front. If the model does not have sleeves, you can make two lower one-sided folds and one opposite, from the neck to the bottom. The darts on the back are removed, and on the shelf it is necessary to complete the depth along the fold (12-15 cm are laid from the middle). Such models are most often sewn with a length above the knee, otherwise they will turn out to be excessively narrowed along the bottom. Pockets are often cut into the side seams.

It is possible to model individual dresses not only by transferring darts. For example, replacing them with a relief, you can make a new thing from the basic pattern with long sleeves with cuffs, a "dropped" shoulder, shoulder straps or a yoke over the chest. Cutouts are also often changed - a V-shaped neck is made from a rounded neck. By changing the base, you can sew many beautiful and non-trivial dresses for all occasions.

Everyone prepares for it in their own way, but, necessarily, in advance: children write letters to Santa Claus, ordering the desired gifts, grandmothers make lists of dishes, from one kind of which guests and relatives will gasp in surprise, men puzzle over what gift to put under the tree of the incomparable mother-in-law, Well, real fashionistas should take care of a dress in advance, in which you will see off the eventful 2011th and celebrate the Happy New 2012th year! I will try to help you make the right choice and look fashionable, stylish and comfortable at the same time.

Probably ... this is the prettiest post I've ever done! Its compilation gave me a lot of pleasure! I hope that when you view this post, a festive, joyful, light mood will be passed on to you! So, enjoy, choose and get started right away!

MODELING OPTIONS !!!

Modeling according to the options listed below is necessary according to the dress pattern, made according to your own measurements.

OPTION 1
This gorgeous dress is made for real beauties! And that's why a dress like this should be in your wardrobe for the Big Exit! And to sew this dress is not as difficult as it might seem at first glance. Feel free to get down to business and surprise everyone with a chic outfit.

Modeling patterns.

Since this dress is a very tight-fitting silhouette, take the minimum increase in the freedom of fitting.

Flare the front half of the dress on the skirt as shown in the dress pattern 1. The more you put in the flare, the more fluffy the skirt will be downward.
Draw on the template the cutout of the front half of the dress and the armholes of the dress. Cut part 2. Cut the top of the front half of the dress along the lines and push it apart as shown in pattern 2. If you want more gathers, push the parts apart by 3 cm instead of 2.
Model the back of the dress in the same way.
Additionally, you need to cut out a detail for draping the dress around the waist: for detail 2, cut out a rectangle. The width of the rectangle should be equal to the width of part 2, and the height should be 2 times wider.
A rectangular piece must be sewn on 2 sides, pulled together, put in pairs on dress detail 2, pulled together, leveling on the sides, swept, sewn. Basting the drapery along the bottom and top of part 2. Then sew the part as one-layer.
Additionally, you need to cut out 2 rectangles for the bow, 26cm wide (ready-made 13cm) and 150cm long (knotted, the bow is 15cm wide on each side of the knot).
Belt details are sewn into the sides of the dress and tied at the back with a bow.

OPTION 2
This colorful bodice dress is simply designed to win hearts: the colorful print, silk satin and the draped detail on the front of the dress are the main components of success.

Modeling patterns.

How to design and sew a dress.

On the front half of the dress, set aside from the waistline 24-27 cm up. Draw a horizontal line along the armhole of the dress.
Set aside 4 cm on the front. Draw the neckline of the dress along the pattern.
From the middle of the front of the dress along the waistline of the dress, set aside 3 cm.From the right side of the bust of the dress, draw a straight line to point 3.
Draw a relief line along the pattern from the left side of the bust of the dress.
Move the waist dart of the dress to the center of the front. From the tucked tuck of the dress, draw a line of the second relief along the pattern.
Cut off the front of the dress along the waist line.
Model the back of the dress as shown in Figure 2.
Additionally, build a draped dress detail. To do this, you need to measure the length along the waist line of the front of the dress. Delay this value along the line.
The length of the detail on the side is equal to the length of the dress on the side from the waist to the bottom.
Reshoot the flank of the part from the side of the dress. Extend the part down 20 cm. Cut out 2 single pieces for drapery, sew them along the bottom, turn them out and iron them. Then put the resulting detail on the front of the skirt of the dress and sweep on the sides. Then sew the skirt as a single layer.
Additionally, re-trim the dress top 3 cm wide in finished form. In addition, cut out: a belt loop for a draped part 10 cm wide (ready-made 5 cm) and 15 cm long (one end of the belt loop is applied to the waistband cut of the dress under the drapery detail, the other end is bent over the draped part and applied from above).
Cut out all the details of the dress from the lining fabric minus the trims.
Embossed seams are reinforced with bones.

OPTION 3
This little black dress embroidered with rhinestones will make you the star of any party! You can sew such a dress yourself if you follow our instructions.

Modeling patterns.

Since the model of the dress is very tight-fitting, the increase in the freedom of fitting can be omitted.
On the front of the dress, transfer the vertical bust dart to the middle of the front, model the neckline, transfer the dart along the waist of the dress to the side of the dress.
Cut the pattern of the front of the dress along the horizontal dotted lines and push it apart by 2-3 cm for assembly.
Make the length of the dress according to your own measurements. (Including the ruffles of the dress).
Modeling the frill of the dress additionally as shown in the dress pattern.
Modeling the detail embroidered with rhinestones as shown in the dress pattern 3.
This detail must be cut out additionally in 2 copies.
Strengthen one detail with thermal fabric, embroider with rhinestones or topstitch ready-made motifs.
Customize the collar of the dress additionally.
Modeling the back of the dress as shown in the dress pattern 4.

IMPORTANT! This dress is gathered at the side seams and is very tight-fitting. Therefore, fabrics should be chosen with elastic additives in the composition.

Additionally cut out the lining (without additives for assembly at the seams).

How to sew a dress.

Cut out from the main fabric:
In front of the dress - 2 children.
Back of the dress - 2 pcs.
Dress frill - 2 pcs.
Collar of the dress - 1 item. with fold + 2 pcs.
The central piece, embroidered with rhinestones - 2 pcs.

In front of the dress - 1det. folded
The back of the dress - 2 children.

How to sew a dress.

On the sides of the front and back of the dress, lay stitching with a stitch length of 4 mm. Pull to the desired length along the pattern.
Along the middle seams of the front of the dress and the back of the dress, lay 4mm stitch lines. Pull off by pinching.
Sweep the side seams of the dress, stitch.
Sweep the middle seam of the front of the dress, sew.

Sew the lining of the dress along the side seams and along the middle seam of the back of the dress until the zipper slit.
Fold the main and lining dress face to face, sweep and stitch along the top seam.
Turn the dress right out, sweep clean at the top.
Reinforce the central part with thermal fabric. Fold up on the sides.
Place the detail on the dress, sweep, straighten the assembly of the dress.
Tuck the allowances on the sides on the second part.
Combine the details with each other, put the second detail on the seamy side of the dress on the lining, sweep away.
Stitch 2 pieces with one stitch to the edge.
Sew rhinestones and beads on the upper part by hand.
Sew the frill of the dress on the sides. Pull off the frills at the top.
Apply to the bottom of the dress from the main fabric, sweep, stitch.
Tuck the lining of the dress along the bottom and sweep it by hand, closing the allowances.
Tuck the bottom of the frill of the dress and stitch it up.
Place the part of the collar of the dress reinforced with thermal fabric on the central part and stitch it on.
Place the second collar detail on the first and sew along the top and sides.
Turn on the face, sweep clean.
Tuck up the bottom of the collar, baste, sew.
Embroider the collar with rhinestones or ready-made motifs by hand.
Sew loops and hooks along the middle seam of the back collar.

OPTION 4
This dress is a real treasure! Such a dress can be sewn from iridescent gold satin with elastic threads, from taffeta and any other dress material.

Modeling patterns.

Since the dress is tight-fitting, the allowances for the freedom of fitting can be omitted at all or given the very minimum.
Transfer the darts on the front half of the dress and on the back of the dress, as shown in the dress pattern. Modeling relief seams along the lines of the darts. Cut the front of the dress and the back of the dress to the desired length of the skirt (without the flounce).
The flounce of the dress should be modeled separately. If it is not possible to cut a flounce of a dress without seams, you can make 2 seams that will match the side of the dress.

Additionally, cut out the belt of the dress.

How to cut out a dress.

From the main fabric you need to cut out:
Dress detail 1 - 1 item. folded
Dress detail 2 - 2 pcs.
Dress detail 3 - 2 pcs.
Dress detail 4 - 2 pcs.
Flounce of the dress - 1 piece. (or 2 children with a fold)
Dress belt - 2 pcs.
The details of the dressing on the top of the dress completely duplicate the pattern of the dress up to the waist.
Dress detailing 1 - 1 piece. folded
Turning children. dresses 2 - 2 pcs.
Turning children. dresses 3 - 2 pcs.
Turning children. dresses 4-2 pcs.
Details of dress trimming must be reinforced with thermal fabric.

From the lining fabric, you need to cut out:
Parts 1-4 minus facing.

In addition, you need to buy bones for the side seams of the dress and the reliefs of the back of the dress.

How to sew a dress.

Sweep and grind off the embossed seams of the dress and the side seams of the dress.
Side seam allowances, taking together stitch by 0.7 cm from the seam. The line is laid from the top of the bodice of the dress to the waist line of the dress.
Cut the bone to measure for threading into the formed drawstring. The length of the bone should be 1cm shorter than the drawstring. Insert the bone.
Restitch the drawstring along the top of the dress and along the waistline of the dress so that the bone does not fall out.
Sew a hidden zipper on the back of the dress.
At the bottom of the dress, sweep and stitch a shuttlecock.
Strengthen the trimming details of the top of the dress with thermal fabric.
Sweep dress piping with dress lining details.
Sweep the side and embossed seams on the lining of the dress.
Fold the lining with the dress face to face. Sweep and stitch over top and zip ties.
Turn the dress over the face, sweep cleanly along the top and iron it out.
Tuck the bottom of the lining and manually sweep with blind stitches, closing the sewing allowance for the flounce of the dress.
Tuck the flounce of the dress along the bottom and sew it by hand with blind stitches.
Sweep the belt of the dress and stitch it on all sides, leaving an area for turning inside out.
Turn the dress belt out, iron it.
Sew the open area by hand with blind stitches.
Put the belt on the dress along the seam and sew tightly to the dress with blind stitches.
Tie a bow on the front of the dress.

OPTION 5
This dress is for the young and the brave!

Modeling patterns.

If you plan to sew a dress from an elastic fabric, then when building a dress pattern, make a minimum increase in the freedom of fitting (1.5 cm).

IMPORTANT! When modeling a dress, the front of the dress and the back of the dress must be completely re-captured on tracing paper.

Dress cutting must be done on fabric, laid out in one layer (except for the dress's flounce). You need to cut out 2 identical details of the flounce, one for the back of the dress, the second detail for the flounce of the front of the dress.

OPTION 6
This cute silk dress captivates, first of all, with its simplicity of modeling and execution.

Modeling patterns.

How to design and sew a dress.

On the front half of the dress, move the bust dart to the side.
Shorten the dart by 2 cm. Model the neckline, setting aside 24 cm from the lower point of the front neckline.
Flare in front of the dress on the side by 4 cm.
The back of the dress is modeled in the same way.
Draw a horizontal line from the bottom point of the dress armhole. Cut off the top.
Move the waist dart in the center of the back of the dress.
Flare the back of the dress by 4-5 cm on the side.
Additionally, cut out 2 strips of fabric for the bow: one 65 cm long and 20 cm wide (finished 10 cm), the second 70 cm long and 15 cm wide (finished 7.5 cm).

OPTION 7
This dress is a real dream! The dress is made of elastic satin, and its accent is the unusual pleats along the skirt.

Modeling patterns.

Do not give any allowances for freedom of fitting, since the model is very tight-fitting
Re-pattern the base of the front of the dress on tracing paper completely.
Draw modeling lines on the bodice of the dress.
Cut off the excess at the top of the dress.
Flare the skirt as shown on the dress pattern.
The more you flare the skirt, the more fluffy it will be towards the bottom.
Mark the squares on the seamy side of the dress pattern, as shown in the pattern.
The length of the dress depends on the side of the square that you specify. Remember that when we fold the folds, we reduce their length by 2 times.
On the pattern, the length of the dress skirt from the fold line will be 40 cm (3 squares 10 cm each (with folds laid) and 1/2 square along the bottom of the dress to align the bottom of the dress.
Model and mark the back of the dress in the same way.
The folds are not ironed, but only swept along the blue dotted lines to the cover of the dress, which is additionally cut out according to the same pattern.
Then the folds are fixed with horizontal lines 5 cm long each.
The lining of the dress is cut 4cm shorter than the dress.

How to cut out a dress.

It is necessary to cut out from elastic satin:
Front of the dress - 1 with a fold
Back of the dress - 2 pcs.

From lining fabric:
In front of the dress - 1det. bend
Back of the dress - 2 pcs.

Additionally, cut out a strip of fabric 8cm wide and 30cm long to make a rose.

IMPORTANT! The concealed zipper should not be long - only about 30cm and should end before the folds.

How to sew a dress.

On the front and back of the dress, use basting stitches to transfer the markings of the folds to the front side.
Do the same on the lining details.
On the front of the bodice of the dress, cover up the darts. Stitch.
Sweep and stitch darts on the back of the dress.
Sweep the dress along the side seams, stitch.
Sew the details of the lining of the dress in the same way.
Lay on the dress and lining face to face, sweep and stitch over the top of the bodice of the dress. Turn out, iron.
Sew a hidden zipper on the back of the dress.
Turn the dress over the face. Lay the folds according to the markings, stitching them to the lining of the dress with short horizontal seams (5 cm each).
Trim excess lining so that it is 3-4 cm shorter than the dress.
Tuck the bottom of the dress and sew it to the lining manually with blind stitches.

How to sew a rose

Roll a strip of fabric in half lengthwise and then twist in a spiral, starting from the center of the flower, fasten with stitches as the petals form.
Hide the edge of the strip under the bottom of the flower.
Sew a flower to a dress.
Decorate the bodice of the dress with ready-made motives.

OPTION 8
Want to be the star of the party? Then, without hesitation, sew this dress for yourself!

Modeling patterns.

Let's give the minimum increase in freedom of fitting - 1.5 cm.

Re-pattern the front half of the dress and the back half of the dress on tracing paper and model the bodice and skirt, as shown in the drawings for patterns 1 and 2.

Additionally, you will need to cut out 2 strips of fabric for the bow: one 20cm wide (finished 10cm) and 80cm long, the second 30cm wide and 15cm long (finished 15cm) and 60cm long. The bow can be reduced at will.

OPTION 9
This adorable dress is made for noisy parties! And you should definitely sew this dress! After all, it is very simple to model it, the main thing is to make a little effort and you are a star!

Modeling patterns.

Free-fit allowances are not given in this case.
The width of the mesh for the skirt should be calculated as follows: Thighs multiplied by three. The calculation given on the pattern is given for the volume of the hips 96cm.
The length of the mesh for the skirt is 80 cm (ready-made - 40 cm).
Mark the folds as shown in pattern 1.
Modeling the bodice of the front of the dress and the back of the dress as shown in patterns 2 and 3.
Additionally, you need to cut out the bottom of the dress from the lining fabric.

How to cut out a dress.

Cut out from the main fabric:
Middle bodice detail of the front of the dress - 2 pcs. with bend
Front flank of dress - 4 pcs.
Back side of dress - 4 pcs.
Middle detail of the back of the dress - 4 pieces.
Dress skirt - 1 piece
Cut out from the lining fabric:
The front of the skirt of the dress - 1 piece. folded
Back of the skirt of the dress - 2 pcs.

Additionally, cut out a belt 8-10 cm wide (ready-made - 4-5 cm), and 100 cm long. Flare the ends of the belt by 2-3 cm.

How to sew a dress.

Strengthen the details of the bodice of the front of the dress and the back of the dress with thermal fabric.
Sweep and grind the details of the front and back of the dress along the embossed seams. Stitch.
Only allowances for the side seams, taking together stitch at a distance of 0.7 cm from the connecting seam. Insert a bone into the formed drawstring, 1 cm shorter than the side seam without allowances.
Lay folds on the skirt of a dress made of main fabric, as shown in the pattern. Ideally, you should make a ball of folds.
The mesh is calculated for the volume of the hips, therefore, along the waist, each fold must be laid a little further than the intended line.
The same can be done along the bottom of the dress, then the shape of the skirt of the dress will look more like a ball.
To keep the folds well, make short bartacks on each that will hide under the layers of fabric.
If the above diagram does not suit your figure, you can create folds in a chaotic manner right on the mannequin.
Sweep the bottom of the dress and the top of the dress. Sweep a zipper over the back.
Try it on and, if necessary, make adjustments.
Sew in concealed zipper.
Sweep and grind the bodice details from the main fabric (dress lining) without reinforcing with thermal fabric.
Sweep and stitch the details of the skirt of the dress from the lining fabric.
Connect the top and bottom of the dress lining, sweeping and stitching along the waist seam.
Put the main product and the lining of the dress face to face.
Sweep and stitch along the top of the bodice of the dress.
Sweep and stitch the dress and lining along the bottom.
Turn the dress over the face through the open area, sweep clean at the seams.
Tuck over the zipper allowances and sew by hand with a blind stitch.
Additionally, sew a belt for the dress. To do this, you need to cut out 2 parts 4-5 cm wide and 100 cm long.
The ends of the dress belt are flared by 2-3 cm.
Put the details of the dress belt on top of each other face to face.
Sweep and grind on all sides, leaving an open area for turning out about 5 cm.
Turn the belt out, sweep clean, iron it.
Sew the open section of the belt by hand with a blind stitch.

The following models are designed on the basis calculated in the Cutter software.
You can download a demo version of this program.

OPTION 10
The dress is tight-fitting at the waist and narrowed at the bottom, made of non-stretching dress fabric. Front bolero with jacket collar and cuffs. The shoulders are slightly lowered. Asymmetric invisible zip fastening slid to the side seam. The lapel of the shelf is sewn to the fold of the lapel of the bolero. Back with reliefs from the armhole and a slit at the bottom. A corset with lace trim is worn under the dress.

Model processing technology

Sew a zipper into the left shelf relief up to the fold line. Stitch the edges of the relief cuts and the lapel with stitches, turn to the right side and sweep the edges. Unscrew the detachable part along the fold, sweep to the shelf and sweep open sections together. Sew on the side dart on the shelf and sew the relief on the shelf. Topstitching the bolero and lapel ledge with lining. Sew bolero armhole from shoulder to notch. Unscrew the bolero details to the front side. Stitch the armhole of the bolero from the notch down with a relief. Sew the right shelf to the bolero. Stitch back middle seam, shoulder darts and reliefs. Stitch back armhole with stitching. Stitch shoulder seams on top and lining. Sew the side seams by inserting the front and bolero sections between the back and back trims. Finish the collar and sew it into the neckline. Process the bottom of the product.

OPTION 11
Dress of the close-fitting silhouette with one sleeve, a cut in the middle, and a shoulder strap. Bodice with an asymmetrical hem in front, the back is lowered from the waist. Zip fastening on the back. The skirt is flared.

Since the dress has an asymmetrical shape, it is necessary to have 2 sets of bases and to build separately the right and left sides of the front and back. On the right and left shelves, transfer the shoulder dart to the side cut. Glue the right and left front edges together and apply model cut lines along the top and bottom of the front of the bodice. On the left back, mark the shoulder width equal to the front shoulder width from point P along the line, because back in this model without a dart and draw the armhole line from point P to P3. Draw model cut lines on the left and right backrest. Measure the length of the shoulder straps on the shelf and back. Cut the sleeve in the middle and widen the front and back of the sleeve.

OPTION 12
Evening dress made of soft jersey, tailored exactly to the figure, with a large neckline, flowing ruffle, with a high side slit, with elongated sleeves gathered at the wrist. The evening dress is developed on the basis of a fitted silhouette dress with a single-seam sleeve without a dart.

To model this dress, you need two sets of patterns and increase the sleeve length by 10 cm.

On the shelves, transfer the shoulder dart to the side cut. Connect two shelves along the middle cut and apply model lines. Cut off the right side of the shelf. Mark the cut lines on the right side of the shelf.
Cut out the allowance for the dart and cut the right side of the shelf along the marked lines without bringing the cuts to the side cut by 0.5 cm. Spread the cuts at the same distance from each other, while closing the side dart. Circle the resulting pattern and cut it out.

On the back, close the shoulder dart, for this draw the shoulder line from point A2 to point P and draw the armhole from point P to point P3. Deepen the neckline of the back. Draw the shuttlecock in the form of a spiral. The length of the inner spiral is equal to the sum of the lengths of the neck cut and the shelf cut. The shuttle width at its widest point is 15 cm.

Gather the sleeve at the bottom along the seam seam.

OPTION 13
Evening dress in brown chiffon with pink satin lining. Feminine drape upper. Strongly flattering cut. Bodice with an undercut in the middle of the distance from the chest line to the waist line. The skirt is full of sun. Sections of the armholes and necklines are finished with elastic tape. In the side seam, there is a hidden zipper. All cuts of the top and lining are sewn together at the same time, only the chiffon skirt at a distance of 10 cm from the bottom is sewn without lining.

On the basis of the dress of the adjacent silhouette, cut off the bodice along the outlined relief line. Close the dart from the shoulder on the shelf. On the shelf and back, outline the location of the neck and armhole cuts according to the model. Close waist darts on the lower parts of the shelf and back. These are the details of the fine lining. Chiffon details should be 1.5 times wider along the shoulder and bottom cuts, as well as along the side cuts of the lower parts of the shelf.

Open flared skirts "full sun" on the fabric:
The radius of the notch at the waist is St / 3. Along the oblique thread, reduce the notch along the waist by 1.5 cm. From the waist, using auxiliary segments equal to the length of the skirt with an allowance for processing, draw the line of the bottom of the skirt.

Fabric consumption for a "full sun" flared skirt:
L = 2R + √ (2R) 2 - W2

where:
L - blade length
R - radius of the circle
R = St / 3 + skirt length with processing allowance
W - web width

OPTION 14
The evening dress is made of fine knitted fabric. In the front there is a deep cut of the neckline, reliefs from the armhole. The back bodice consists of three triangular pieces. At the end of the upper part of the bodice there is an air loop of 2 cm. The side parts of the bodice of the back end with ribbons that are passed through the loop of the upper part and tied. The back skirt consists of two parts.

Designed from a fitted silhouette dress, where all allowances have been reduced to zero for a snug fit.

OPTION 15
The dress is close-fitting on the bust and widened from top to bottom in crepatlas. Folds are laid in front, in the folds of which ruffles are sewn. Finishing stitches are laid on the folds of the folds to the bottom. Pleats on the sleeves. Bugles are sewn along the bottom of the sleeves and between the folds, shimmering in the dim light.

The model is designed on the basis of a straight silhouette dress with one-seam sleeves. In the measurement "Arm length to the first joint of the thumb" (Dp1c), you must enter the length of the sleeve for this model, namely to the elbow. In the measurement Ozap, enter the value of the shoulder girth at the top of Ov. PB = 5, Popv = 20, Posap = 10 cm.
On the shelf, outline the lines for stitching in the ruff, cut the base along these lines and move the parts 2 cm apart. The dashed line marks the facing of the neck of the shelf and the back.

Model processing technology

Finish the ruffles with a zigzag stitch with a double hem, preferably using a snail foot. Finish the end cuts with a hem seam. Neaten the edges of the front and back, except for the shoulder cuts, neck and armhole cuts. Fold the bottom of the shelf and stitch it at a distance of 2 cm from the fold, leaving 5 cm unstitched from the side sections.

Mark the fold lines of the folds on the shelf. Baste the ruffles to the folds of the folds to a depth of 1 cm. Stitch the ruffles with a seam 0.5 cm from the fold of the fold and continue sewing to the bottom.

Baste the ruffles to the shelves and stitch them onto the shelves by placing a line in the ruffle stitching line. Overcast the neckline and overstitch the neckline of the shelf with it. Sew a seam on the facing 1 mm from the fold. Iron the piping to the wrong side, securing it along the shoulder cut. Sew and press on the back seam. Neaten the facing and overstitch the neck of the back with it, leaving the shoulder seam allowances unstitched. Stitch over the facing seam 1 mm from the fold.

Put the shoulder sections of the shelves together with the edging between the shoulder sections of the back and the stitching of the neck of the back, stitch the shoulders and overcast from the side of the shelves. Press back neck seam to the wrong side. Stitch side cuts and iron. Fold back bottom and topstitch 2 cm from fold. Neaten the sleeves, except for the ridge cut. Create folds in the direction shown in the drawing. In the middle of the sleeves, lay folds and secure them with a zigzag stitch with 4-5 punctures in one place. Stitch bugles on sleeves. Sew side cuts of sleeves, hem sleeves. Sew the sleeves into the armholes and overcast the embroidered seams from the front and back.

OPTION 16

Soft crepe satin dress. The bodice is loose with one-piece sleeves. The collar is double so that the dress is kept on the shoulders, there is an openwork lace at the back. The skirt is slightly tapered towards the bottom. Wide belt with a bow tied twice.

The model is designed on the basis of a straight silhouette dress. The position of the body is 0, Pc = 0. The bust is closed from the shoulder and open from the waistline. The bases of the bodice, the front and back, are connected so that their middle cut is in one line. Distance | A4, H | equal to the length of the sleeve plus the width of the shoulder slope "Shp". The model is cut without middle and shoulder seams.

OPTION 17
Fitted silhouette dress made of chiffon with lining. The bodice lining is duplicated. Side closure with invisible zipper. The length of the dress is from the short side to the mid-calf, with ankle-length. The figure-hugging cut makes it look slimmer.

The model is designed on the basis of an adjacent silhouette dress. Two sets of patterns are printed. On both halves of the shelves, darts from the shoulder are closed, and open from the side sections. The shelves and backs are connected vertically, then all the constructive lines necessary for the model are drawn, taking into account that the shoulder width of the bodice in a cut should be twice as wide as in the finished form. The skirt consists of two gussets, the shape and cutting method of which are shown in the drawing.

OPTION 18
Strongly flattering cut. Detachable at the waist and under the bust. Draped top of the bodice. The lower part of the bodice is a snug fit. The shoulder is down, there is a deep cut in front. Flared skirt". Length 6 cm below the knee.

The model is designed on the basis of an adjacent silhouette dress. Mark the cut line on the shelf. Move the shoulder dart to the bottom edge of the upper shelf. Extend the shoulder by 5 cm and draw a new shape for the armhole. Mark the shape and depth of the cutout. Draw the lower part of the shelf horizontally, shortening it by the amount of the tuck. Mark the cut line on the back. Draw the shoulder line from point A2 to point P in a straight line and extend the shoulder by 5 cm and draw a new shape of the armhole. Mark the cut of the neckline and the middle cut of the back. Cut the lower part of the back horizontally by the depth of the dart.

The flared skirt is built according to the calculations below:
FROM = St * 1.4 - the radius of curvature of the waist line.
TB = Dts / 2 - the distance from the waist to the hips.
TH = skirt length
TT1 = St + Fri
BB1 = Sat + PB

Where:
Dts - the length of the back to the waist.
St - waist half-girth.
Sat - half hips.
Fri - waist allowance.
PB - hip allowance.

OPTION 19
Dress made of fine knitted fabric with a satin effect. The top of the dress is straight cut. The skirt is two-layer, tight-fitting to the figure. Elastic tape is sewn at the top of the back with a zigzag stitching. The seam of the bodice and skirt is stitched with an elastic tape with a zigzag stitching.

The model is designed on the basis of a straight silhouette dress. It can be done without side seams on the bodice by connecting the sections.

OPTION 20
A dress made of knitted fabric with a fitted silhouette, sleeveless, with a high shoulder line. Asymmetrical neckline. A strap on one shoulder, a thick gather on the other.

The model is designed on the basis of a fitted silhouette dress without any allowance for free fitting. Connect the drawing of the right and left shelves along the half-line and cut the drawing from one highest point of the chest to the other and cut out the middle part from dart to dart. Close the right dart from the shoulder by turning the cut out part of the drawing around the highest point of the right chest. Connect the highest point of the neck with point A7 on the left side of the drawing with a convex line. Design the neck according to the model. Tighten your shoulders to the desired strap width.

OPTION 21
Silvery crepe satin dress, fitted silhouette, lined with a black frill sewn to the bottom. The flying yoke is assembled under the lintel.

The model is designed on the basis of an adjacent silhouette dress. The shoulder dart has been moved to the middle cut of the shelf.

Sewing a long dress according to this design, but without a frill at the bottom, you will get a wonderful evening dress.

Model processing technology

Glue the straps and the lower parts of the trim strips with non-woven material. Stitch the lintel along the side cuts and turn to the right side. Stitch the middle section of the yoke to the front side. Stitch the dart on the yoke to the front side, after inserting a jumper from the wrong side into the seam. Fold over and stitch the bottom of the flying yoke.

Collect the top of the trim strips. Stitch the planks along the upper side cut. Unscrew the planks to the front side and secure with a stitch along the bottom and side cuts. Sew in the straps between the shelf yoke and the flying yoke at a distance of 4 cm from each other. Fasten the lower cut of the lintel to the seam of the yoke dart from the front side. Neaten the shelf and lining to it.

Stitch the yoke to the front by inserting it between the shelf and lining. Neaten back cuts and lining to it. Stitch back center seam and press press. Stitch darts on the back. Stitch the upper section of the back with lining. Insert elastic between back and lining and topstitch with zigzag stitch.

Stitch back straps and turn to right side. Stitch the front straps along the outer cut by inserting the back straps into the neckline. Stitch the front straps along the inner cut to the stitching seams of the yoke and turn to the right side. Sew the front straps to the front of the yokes.

Stitch the side sections of the front and back together with the lining to the waist, and then separately the sections of the dress and the lining. Tuck the front straps from the seamy side and topstitch them near the stitching seam. Process the frill, stitch it to the bottom of the lining. Hem the bottom of the product.

If the model seemed to you unpretentious, then you are mistaken)) See what you can create from this pattern:

OPTION 22
Dress made of thin knitted fabric, tight-fitting to the figure. Parts of the bodice are intertwined, the straps on the back are twisted. On the side and back cuts from the seamy side, an elastic tape (elastic band) is stitched with a zigzag stitch.

The model is developed on the basis of a dress of an adjacent silhouette with a preliminary increase in the values of vertical measurements of the figure, namely: chest height - Bg, front length to the waist - Dt.p, back length to waist - Dt.s, oblique shoulder height - Bp.k, length sides - DB, all 1.3 times. Allowances for freedom of fitting Pg, Fri, Pb are equal to zero. Connect the upper and lower parts of the bodice by turning the upper part, as indicated by the arrow.

Bodice processing technology

Seam straight upper cuts and lower cuts from notch to notch of both bodice parts with a seam in a hem with a closed cut. Sew the right side of the bodice along the bottom cut to the notches. Pass the left side of the bodice through the hole in the right part of the bodice after sewing and stitch it down to the notches. Stitch the bodice to the shelf.

OPTION 23
Dress in crepe satin or chiffon with lining, tight-fitting figure. Concealed zip fastening in the back. The top of the dress is finished with a bias tape made of the main fabric. The model is developed on the basis of a dress of an adjacent silhouette, the groove on the chest from the shoulder cut is re-cut into the side cut.

OPTION 24.
A very beautiful model of a tunic, sewn as easy as shelling pears. Suitable for cocktail dresses, for pregnant women and luxury women.

OPTION 25.
The pattern is the basis for a dress for ladies with appetizing shapes + 2 patterns for cocktail dresses and a lot of ideas, including evening dresses!
Watch and

OPTION 27. Corset dress!
Watch .

OPTION 28. In this magnificent dress you will be the queen of any evening!
Watch .

OPTION 29. Luxurious satin dress!
Watch .

OPTION 31. Evening satin dresses!
Watch .

OPTION 32. Strapless dresses!
Watch .

OPTION 33. The sexiest and easiest dress to sew!
Watch and.

OPTION 36. Dress with drapery at the neck!
Watch .

Fashionable review of evening dresses from leading fashion houses! Season 2011-2012!

Many women choose a dress as an outfit for the New Year. In our opinion, no suit or insanely stylish trousers combined with a blouse will accentuate your femininity and sexuality like a dress! So what kind of dress can you wear for the New Year?

Fashionable dress for New Year 2012 - fabric
Having decided on the model, be no less serious about the choice of material from which your festive masterpiece is woven. It can be silk, satin, etc., but the undisputed leader of fashion shows are velvet dresses: luxurious, flowing, a bit like a surface of water.

Fashionable dress for New Year 2012 - color
The mega fashionable palette today is headed by the alluring and mesmerizing color of silver and gold, as well as all shades of gray, beige, sand, bright red and deep purple and, of course, stylish black and chic white have not sunk into oblivion.

Cocktail Dress
Are you the owner of chic, slender legs, and you certainly want to demonstrate your pride to others? Then you should opt for a sexy, short cocktail dress - this timeless classic that can be presented in a new way by playing with the material a little. For example, a short lace dress will create a unique seductive, light look. Also, designers offer us luxurious dresses embroidered with crystals (Givenchy collection, Donna Karan).

Floor-length dress
If you want to make a lasting impression, you just need to try on the dress to the floor! Nothing adds chic and luxury to your look like a long dress. At the same time, it can be without a deep neckline, but with an almost indecent cut in the back ... New Year's are surprises, and your naked back will be a pleasant, alluring surprise for your companion! If you are not ready to expose the most graceful part of your body so much, the designers suggest that we use lace inserts.

Dress - "fish"
For owners of a slender figure, designers suggest giving their preference to a fish dress. In this model, you will feel like a world-class star on the red carpet before the Oscars.