Pattern for sewing a skirt. Models of skirts with patterns for obese women photo. Correct skirt size is secret number one

Walking in the park in a T-shirt and shorts, sometimes you still want to put on a skirt - a long, light, airy one. And complement it with a short open top. With this thought you wander around the shops, but the size is not quite the same, then the quality of the fabric, then the pattern ... I wish I could sew it myself! But I really don't want to understand these complex patterns. Sound familiar?

Today we will look at the modeling of summer suits that do not require patterns at all: simple models of skirts that can be designed directly on the fabric, and models of summer tops like "bustiers", which are performed using the "tattoo" method, that is, directly on a mannequin or on your figure.

Description of models (fig. 1)

Model 1. Combined cotton suit. A multi-tiered skirt with a yoke up to the hip line, with a "mesh" insert, with a zipper, with decorative trim along the bottom of the product. Top in bustier type, on a yoke, loops for a lacing belt are sewn into the belt.

Model 2. Suit made of lightweight knitted fabric with a printed pattern. The skirt is "bell", on the elastic belt. Top on a wide belt-sash. The bodice of the top has both shoulder and waist pleats. The waist of the top is too high. There are also waist folds on the back (instead of darts).

How to sew all this, and even without patterns?

The simplest skirt is a tapered one. "Bell" is a kind of it. There are both "flare" and "sun". This skirt is built on the basis of a segment of a circle (Fig. 2 on the left).

Bell skirt

OH line - lobar tissue. TT1 - waist line, BB1 - hips line, НН1 - bottom line of the product, ТН - skirt length (don't forget seam allowances and freedom of fitting). Single-seam, seam along the T1H1 line. Along the TH line - the fold of the fabric. Depending on the direction of the pattern, the skirts are arranged along the share (as in photo 2), then it will be two-seam.

Tiered skirt

Also easy to build (Fig. 2 on the right). Classic tiers - each subsequent one is 1/3 larger than the previous one. In our version, in order to highlight the “mesh” tier, all the tiers above the mesh are only slightly larger than the previous ones, and below the mesh they are strongly flared so that the skirt is faldila (photo 1). The proposed option is a skirt with a yoke. The yoke is a part of the “bell” skirt (figure TT1B1B). For a more form-fitting option, darts and a zipper in the side seam are used.

What are the similarities and differences between these skirts?

The similarity is the upper part of the skirt. Only in knitted model 2 it is looser, with a belt with an elastic band (it will then be closed with a wide sash from the top), and in cotton model 1, the upper part is in the form of a yoke.

Differences. The bell is cut from a whole piece of fabric, there is only one side seam in it (or two, if the pattern of the fabric has a direction). And multi-tiered - from several strips of fabric, you can combine multi-colored or use a contrasting finish for a single-color fabric.

Jersey top (for model 2)

The property of the fabric allows the use of large folds, in combination with a wide belt, the model will accentuate the waist and increase the chest. See fig. 3.

The figure does not show the belt, it is cut from a lobe strip of the desired width. The waistline is in the middle of the belt (therefore, it turns out that the visible waistline is too high), and its lower part covers the belt of the bell skirt (photo 5,6). The neckline is cut to the waist. Thin girls can afford such a neckline (photo 5), for large sizes it is better to extend the fasteners to the desired height. (Photo 4)

Top - "bustier" (for model 1)

Bustier on a yoke (fig. 4, photo 8). A "false belt" of the main color of the suit is sewn on the front to emphasize the waistline (photo 14). The bustier is also cut with an allowance under the bust, only not folds are used, but the pleating of the fabric (the whole suit is more fitting). (Photo 3)

Fitting, costume decor

On knitwear with a pattern, you can even without decor, there is already an accent - a neckline in combination with a belt (photo 5). Buttons mother-of-pearl matte to match (photo 7). Neat seam processing.

For model 1 - lacing belt (photo 9.10), matching mini-buttons (photo 11), finishing as a continuation of the straps (photo 8.9).

Decor - belt loops (photo 10), tier-mesh on the skirt (photo 12), decorative trim on the bottom of the product (photo 13).

Well, now, the costumes are ready (photo 14,15). Now you can go to the city park and to the beach. On hot days, you so want to enjoy the last rays of the sun, so that in a frosty winter, sorting through things in the closet in search of woolen socks, you suddenly stumble upon these summer suits and “hang out” for half an hour. Remember the hot summer and how she puffed over “this bell”, how she got pricked more than once because of the “tattoo method”, how proudly she wandered along the beach in a new suit, burning her heels with hot sand ... ? ", To tear off the crumpled things from the cheek, to reply in enchantment:" I sewed it myself "...

Polina Vertinskaya

This article gives the construction of pattern drawings for several styles of skirts at once. These are such popular styles for all women as a straight classic skirt (pencil skirt), a half-sun cut along an oblique skirt and the widest model of a skirt at the bottom - a sun skirt. Recommendations are given for constructing a pattern of a skirt flared to the bottom, consisting of several wedges, as well as advice on how to calculate and lay the tucks on the skirt in a fold.

Measurements for constructing patterns and fabric consumption

To build a drawing, you will need to take only three measurements: waist circumference; hip girth; skirt length. But keep in mind that to build the drawing, their half values ​​are used, except for length measurements. The half values ​​of the waist and hip measurements are designated St, Sat, respectively, the half-girth of the waist and hips.
In order for the skirt pattern to be as accurate as possible, you need to correctly take these measurements, so in case of difficulty, you can see the article on the site How to take measurements for a dress. It shows in detail and clearly how to take measurements for a skirt.

Do not forget that when sewing any clothes, when building a drawing of pattern details, it is required to make allowances for free fit in the calculations, which in these calculations are indicated by Fri, Pb, etc.

The consumption of fabric for sewing a skirt depends primarily on the volume of the hips and secondly on the chosen style of the skirt. So girls whose hips exceed 130 cm will have to buy two lengths of fabric, even for sewing a straight skirt. Up to 130cm, one skirt length is enough plus hem and belt allowances. As for the style of the skirt, for example, a sun skirt may require 5 meters of fabric 150 cm wide. Be prepared for this, and you will find out the more accurate fabric consumption when you build a skirt pattern.

To construct a drawing of this straight pattern, the following measurements were used: St = 38cm, Sat = 52cm, Di = 54cm. Increases Pt = 1cm, Pb = 1cm.

Before you start building a pattern, prepare paper, pencils, a ruler, felt-tip pen, tape and scissors. The pencil should be soft, the felt-tip pen is useful for marking points and main lines, and tape is useful for gluing paper. See How to make a pattern and other tips for beginners.

To build a pattern for a straight skirt, it is convenient to use graph paper. The paper grid allows you to quickly and accurately mark key lines. You can use another type of paper (tracing paper), but in any case, first build a right angle with the vertex T.

The level of the hip line for typical and close to them individual figures: TB = 19.5 cm.
The level of the bottom line TH = Di = 54cm. From the obtained points T, H, B, draw horizontal lines at a distance of 53 cm and put points T1, H1, B1. This distance is determined by the formula Sb + Pb = 52 + 1 = 53cm.

Now the pattern mesh needs to be divided in half, into the front of the skirt and the back. The vertical line passes through point B2, calculated by the formula BB2 = (Sb + Pb) / 2 - 1 = 25.5 cm.
For full figures with a large belly, the back and front panels of the skirt are designed with the same width.

From point T2, set aside 1-1.5 cm up and make a mark. Now you need to set aside 3.5 cm segments from the same point to the left and right and draw with a smooth line the upper part of the side line of both halves of the skirt and a slightly raised part of the waist line.

The amount of darts is calculated by the formula (Sat + Pb) - (St + Fri) = (52 - 1) - (38 + 1) = 14cm. This amount is divided by two and two darts will be 7cm. Moreover, the rear dart will be larger than the front one in the following proportion: the rear one is 14/3 = 4.7 cm, and the front one is 14/6 = 2.3 cm (4.7 + 2.3 = 7).
The position of the rear dart is determined by the formula BB3 = 0.4 x BB2 = 0.4 x 25.5 = 10.2 cm.
Front dart position B1B4 = 0.4 x B1B2 = 0.4 x 27.5 = 11cm.
The back dart ends 4-5cm above the hip line, the front dart ends 10cm above the hip line.

The narrowing of the skirt is 1-2 cm, they are evenly laid to the right and left of the H2 point.

For freedom of movement, slots, folds, and cuts are often made on the back panel of the skirt. In order for the fold to lie better, the middle line of the rear panel is slightly retracted (red outline).

Measurements for building a drawing of a skirt: St = 38cm, Sat = 52cm, Di = 80cm.

Consider two options for the tapered skirts: the half sun and the sun. The main difference between such skirts extended to the bottom is that they have beautiful and soft folds that evenly fit around the skirt. This effect appears due to the cut of the fabric along the oblique line.

It is not necessary to use paper to create a pattern for such a skirt. The pattern of a sun skirt or a half-sun skirt can be built directly on the fabric. See Pattern of a half-sun skirt on the fabric.

First, draw a right angle with the apex at point O. From point O down the vertical, lay a segment OT equal to the half-girth of the waist multiplied by K (coefficient), which is 0.64 for the half-sun skirts, and 0 for the “sun” skirts , 32.

Skirt-sun: FROM = 38 x 0.32 = 12.2 cm.
Half-sun skirt: OT = 38 x 0.64 = 24.3cm.

From point T down the vertical, a segment TB is laid, equal to an average of 19.5 cm.
From the same point T, a segment equal to the length of the skirt is laid down, and point H.
For a "half-sun" skirt from point O with a radius of OT, draw an arc until it intersects the second side of a right angle at point T1, and with a radius equal to OH, draw a bottom line HH1.

The sun skirt is built on a straight line, in the middle of which point O is marked. Coefficient K = 0.32.
Putting aside the segment OT = 0.32 x St = 12.2 cm on a straight line, draw a semicircle TT1 from point O with this radius.
From point T, a segment of TH is laid, equal to the length of the skirt. From point O with a radius equal to OH, draw an arc HH1 - the bottom line.

Skirts cut along the side must be left hanging for several days in order for them to stretch and take a permanent shape.
After that, the length of the skirt is aligned on the figure. The bottom of the skirt is aligned from the floor along the ruler.

Construction of patterns and modeling of flared skirts (year)

St = 38cm, Sat = 52cm, Di = 80cm. Fri = 1cm, Pb = 2cm.

D = 80cm is laid from point T and point H.
From the same point T, a segment TB = 19.5 cm is laid, which determines the line of the hips. Horizontal lines are drawn through points B, H, T.

Now you need to calculate the width of the wedge along the waist and hips. Most often, these skirts have a tight fit around the waist and hips.
T1T2 = (St + Pb) / n = (38 + 1) / 2 = 19.5 cm (for a four-piece skirt), where n is the number of wedges in half, since the calculation is for half-girth of the hips.

T1T2 = (38 + 1) / 3 = 12.7cm (for a six-blade).
On the obtained segments, point T should be in the center.

The calculation of the width of the wedge along the line of the hips is carried out according to the formula: B1B2 = (Sat + PB) / n = (52 + 2) / 3 = 18cm, where BB1 ​​= BB2.

The width of the wedge at the bottom is taken from the skirt model.
The side line is drawn with a smooth line.

The waistline is designed as follows.
The segments TT1 and TT2 are divided in half, and perpendiculars are drawn from these points to the extended sides of the wedge. The waist line is drawn with a smooth line slightly raised along the edges (0.5 - 0.7 cm).
The sides of the wedge are equalized using the segment TH, that is, its sides are equal to the length of this central segment.

To build a wedge of a year skirt, first find the level from which an additional expansion is made.
The sides of the wedge are again equalized after additional construction of the extended part of the year skirt. KN = K2H2 = K1H1.
The wedge of the year-skirt is drawn symmetrically with respect to the vertical TH line on all parts of the year-skirt.

The pleated skirt pattern has the following measurements: St = 38cm, Sat = 52cm, Di = 54cm, Pt = 1cm, Pb = 3cm. This pattern is suitable for a girl with sizes and heights of 164-96-104.
The number of folds can be any. This skirt model has 10 folds.

In order to determine the distance between the folds along the hip line, the following calculations must be made:
((Sat + PB) x 2) / n where n is the number of folds. ((52 + 3) x2) / 10 = 110/10 = 11cm.

The distance between the folds along the waist line is also determined in the same way:
((St + Fri) x 2) / n = 7.8cm.

The depth of the fold at the bottom should be at least 3cm (in this case, let's take 5cm). To prevent the folds from opening, on each side of the fold, you need to make a bevel of 1-2 cm from the hip line to the bottom line.
The longer the length of the skirt, the more the bevel, the more extended downwards this skirt will look.

If the construction of the skirt is carried out directly on the fabric, you can pre-process the bottom of the product. A skirt with a circular pleat often requires two lengths of fabric. In this case, the seam seams must be in the inner fold of the fold.

A right angle is built with the apex at point T. From point T, the level of the hips is laid down vertically: TB = 19.5 cm.
From point T, a segment of TH is laid down, which is equal to the length of the product: TH = Di = 54 cm.
To the right of points B and H, horizontals are drawn. Line TN - fold line or seam inside the fold.
From point B, lay the depth of the fold, which is 6cm (5cm + 1cm): BB1 = 6cm.
Next, lay the distance between the folds along the hip line: B1B2 = 11cm.
Find the middle of the fold:
B1B11 = B11B2 = B1B2 / 2 = 11/2 = 5.5cm.
The middle of the fold coincides with the lobar thread.

A vertical line is drawn through point B11. The intersection with the bottom line and the waist line is designated by the points H11 and T11.
From point T11 to the right and to the left, they lay off segments equal to: the distance between the folds divided by two. That is, 7.8 / 2 = 3.9cm.
From the point H11, segments equal: (B1B2 / 2) + 1 = 5.5 + 1 = 6.5 cm are laid.
The resulting points are connected with straight lines. Next, a segment equal to two fold depths is laid along the line of the hips, and the entire construction of the skirt pattern is repeated.

Women with curvaceous forms are required to be able to dress beautifully and choose clothes that will favorably emphasize all volumes.

Today there is a large selection of plus size dresses, skirts, trousers, blouses for women on store shelves. And we want to talk specifically about skirts and find out which models are worth choosing. Also, we have not forgotten about the needlewomen who love to please themselves and their loved ones with fashionable new clothes. We also collected patterns of skirts for obese women, found a description and diagrams of how to knit and crochet a fashionable stylish model.

What styles of skirts are ideal for obese women (photo)

I want to start with what all the same models should be chosen by "non-standard" women, because a girl should always remain feminine and graceful, and all the shortcomings can and should be hidden with the help of correctly selected clothes, emphasizing the merits.

Many people think that clothes for overweight are absurd and dimensionless, unremarkable things. They are deeply mistaken. A woman with large breasts and spectacular hips looks much sexier than a skinny woman, and accordingly things look better on her. Therefore, today, when everyone said goodbye to complexes about extra pounds, designers sew beautiful outfits specifically for women of the "+" size.

So, the most ideal style is pencil skirt... She perfectly adjusts the figure and is perfect for any occasion. With her, you can create many interesting images, and the main thing is that even ladies with belly can afford them. She will hide it and create a smooth transition.

Popular articles:

Skirt "sun" full fashionistas can also try on, but on condition that the top is tight-fitting and discreet.

"Tulip" adjusts the figure well, so take note and look after such a model in the store.

Basque models also have the right to be in your wardrobe.

Do not forget about vertical print, which visually stretches the figure, making it slimmer.

Models such as godet, mini, thin knitted tight-fitting, with a large print, an abundance of ruffles and rhinestones, trapeze are strictly prohibited.

How to sew a skirt with your own hands (patterns and description)

In order to create a new product at home, you need to have:

• sewing machine
• threads
• a needle
• scissors
• the cloth
• millimeter or a ready-made basic pattern of a skirt
• crayon
• tape measure

A very important stage is the construction of a pattern. There are two ways: constructive and dummy. The dummy method is the easiest and does not require calculations and data, but it cannot do without outside help. The constructive method requires accurate calculations, but it is the most correct and makes it possible to create the perfect pattern.

Fake way.

Constructive.

How to sew long skirts without a pattern

There are styles that can be sewn without a pattern and special skills of a seamstress. To do this, you only need to know the length of the product and the size of the waist. As a result, you will get a very original and simple thing, for which you will have to pay a lot in the store.

Cutting consists in cutting off a strip of fabric, the length of which is equal to the length of the product + a seam allowance (hem at the bottom) + a belt allowance. About 4 cm will go to the hem along the bottom, and about 10 cm to the belt (similar to the hem, it will just be wider). As a result, the required length = product length + 14 cm. You can experiment with the width. The more fabric, the more voluminous the product will be, so here you fantasize yourself or just use all the available material.

After cutting off the required piece of fabric, start with the side seams. Newbies can make money first.

Next, we work on the bottom seam and proceed to the belt. We sew the belt in the same way as the bottom of the product, we just retreat the required amount of cm (we put aside 10 cm). Insert the elastic and voila, the chic new outfit is ready!

Create a stylish straight model

The pencil skirt is also called "straight model", which means that now we will learn how to sew the most stylish and versatile skirt that suits everyone.

To build a drawing, you need to know the length of the skirt, the semicircle of the waist, semicircle of the hips and, based on these data, create a pattern (see the video above).

You should end up with something like this.

After transferring the pattern to the back of the fabric (remember to leave 2 cm for the seams), you can start sewing.

Sewing the product:

1. Stitch darts on the front and back, iron the seams with an iron.
2. Stitch side seams, leaving room for zippers.
3. Sew on the zipper.
4. Process the bottom of the product.
5. Process the top of the product.

Everything is ingenious and simple, the main thing is to have a little free time and a little patience.

Knitting of skirts (schemes and description)

Winter is a great time for knitted things, so with the onset of cold weather it's time to start creating knitted patterns. And in the summer, crocheted fishnet skirts will be popular. You can create light and airy styles that will look beautiful on ladies with curvaceous shapes.

Knit straight pencil skirt from VICTORIA`S SECRET

First you need to take measurements or take a ready-made skirt of your size.

Necessary:

• 800g wool yarn
• knitting needles No. 4-4.5

The product is knitted from bottom to top, but first you need to knit a sample with garter stitch to determine the density of knitting. Calculate how many stitches and rows there are for 1x1 cm. This will become the basis and you will be able to dial the correct number of stitches for your hip size. If you decide to knit in a circle, use circular knitting needles (this way you will not have a seam).

On the sides - “pearl pattern”, in the center - “aron pattern”.

Pearl Pattern: alternately 1 person, 1 N., shifting the loops after every 2nd row.

Aran pattern: knit according to this pattern.

We begin to knit with an elastic band (knit 2, purl 2), which must be knitted 2 cm. Further, the main “pearl pattern” and “arona pattern”. On the sides, make subtractions, as in your pattern. In the waist area - 8-10 cm 2x2 elastic bands (alternate 2 facial, 2 purl).

Crochet lace skirt

Product size - 56.

Required: 650 g of fine yarn, hook No. 1.3 mm.

Knits very easily, provided that you have a pattern of your size. You should start from above with a simple pattern, then tie 8 motifs and attach to the panel. Further, the skirt expands a little and the bottom already consists of 9 squares.