Preparations for Easter continue and my craft factory does not stop working. And now, in front of you is another craft in technology modular origami - chicken in shell.
I have already described how to make a module. The total number of required modules is 424. Of these, 162 are yellow, 261 are white and 1 is orange.
Let's get started:
Let's start collecting the craft with chicken. It is much more convenient to fold 3 rows at once, each of them consists of 12 yellow modules. We close our modules in a ring and lay out another row, from the same number of modules. We give shape.
From 5 to 8 rows inclusive, we lay out rows of 12 pieces.
But in the 9th row, we insert the modules with the corners inward, the amount is 12 pcs.
From 10 to 13 rows we lay out from the same yellow modules, the number of which is still 12.
In row 14, we put each module on 3 tails of the previous row. There are 8 modules in a row. Shaping the chicken.
Separately, we make two wings: put 1 module on the edge, put one module on the corners and close with 1 module.
We glue the chicken wings, as well as the eyes and beak.
Now let's make the shell, it consists of an upper and a lower part.
Lower part: we lay out 3 rows of 14 modules of white color, we close them in a ring. The fourth row is also of 14 modules, and do not forget to shape the shell.
In the 5th row, we make an addition: we put on modules on each tail of the previous row (28 modules come out in a row).
6 rows are also 28 modules.
And now we act chaotically: in any place we put on 7 modules, on them 6, and then 5 modules. We retreat, put on 3 modules, and then 2. We retreat again, put on 5 modules, they have 4 modules, 3 modules and 2 modules. Once again we retreat and put on first 3 modules, then 2, and 1 module.
Top part:
We lay out 3 rows of 10 modules each, close them into a ring and lay out another row.
In the 5th row we add, 20 modules should come out. Sixth row - 20 modules.
Then we act in the same way as with the lower shell, putting on randomly. So, we put on 5 modules, 4 modules on them. and 3 modules, skip about 8 modules, put on 4 modules, and then 3 more up. On this, the shell is ready.
We connect all the details, if you wish, you can glue them.
Everyone loves small, yellowish, fluffy chickens. In today's master class I will tell you how to make a chicken from origami modules according to the correct scheme.
To make a chicken in a clearing, we need:
1. PVA glue.
2. Scissors.
3. Modules made of A4 office paper.
4. Ruler.
5. No video disc required.
To make a chicken, we need: 315 modules in the size of 1/16 A4 sheet.
First row of chicken. We need 22, fold them small side down.
Second row. We also need 22 modules, we fold them with the long side down.
Third row. Put the 22 modules on with the long side down.
We close everything in a circle. We needed 66 modules for this.
Turn the resulting circle inward.
Fold the fourth row with the long side up.
The fifth, sixth, seventh rows are similar.
Give the body a rounded shape.
Eighth row. We need 22 modules, we put them vertically with the small side down.
We begin to make the head of our chicken.
We glue the scallop to the head with pva glue.
We make the wings.
And a ponytail.
We glue the wings and tail to the body with PVA glue.
Now we will make our chicken eyes. For this we need black paper. You can also use those purchased in the store.
We glue the eyes and mouth to our chicken.
The chicken is ready. Making a clearing.
We need:
1. Green paper.
2. Scissors.
3. Glue.
We cut the paper into rectangles measuring 7 × 4 cm. We cut them on one side not reaching the edge of 6 mm .. Using scissors we wind our blades of grass.
We glue the resulting blades of grass on the disk in a circle using PVA glue.
We put our chicken in the center. And all our craft is ready. You can present it to your mother or grandmother, as well as to the class teacher.
Not so long ago, the origami technique gained popularity in many countries and truly turned into a world art, although the roots of this art go deep into ancient China, and this knowledge was available to few, only to the representatives of the upper classes. In the middle of the twentieth century, technology began to spread throughout the world. Various varieties began to appear: simple origami, modular origami, pattern folding, wet origami. Little by little, origami even began to be introduced into kindergartens and schools, since scientists have proven that this form of art contributes to the development of fine motor skills, concentration and perseverance in children. And if you want to instill these qualities in your child, then invite him to make a modular origami chicken in shell together.
But before we get started, let's define what modular origami is and how it differs from the classic method. Classic origami consists of using a single sheet of paper, which is folded into original figures without the help of scissors and glue. Modular origami consists of several separately folded parts, which are subsequently inserted into each other without the help of glue.
Triangular modules
So what do we need to create a cute chicken in shell? Let's take a look at a master class and a detailed assembly diagram.
Of the necessary materials, we only need paper of three colors: white, yellow and red. Our chicken consists of triangular modules.
Triangular modules can be folded in various sizes, it all depends on the volume and height of your craft. All modules in one craft must be of the same size. How to properly divide an A4 sheet is shown in the photo.
Having decided on the size and cutting out the necessary rectangles, we proceed to the assembly of triangular modules. Detailed instructions are shown in the photo.
It is necessary to make 221 yellow modules, 304 white and 1 red module, which will act as the beak of our chicken.
Assembling the bird
The first row is assembled from triangular modules located with the short side outward, all subsequent rows of modules are located with the long side.
We begin to collect the chicken, for this we collect three rows of 16 modules of yellow color, not forgetting that the first row is located on the short side.
We turn our craft out so that the modules turn out to be the long side to us, and add 4 more rows of 16 modules to them.
In the eighth row, place another 16 modules with the short side. We add 16 modules to the ninth row, but we already have the long side.
And in the same way we collect four more rows. At this stage, we already have the body of our chicken, now we start assembling the wings.
To assemble one wing, we need 6 yellow modules. We arrange these modules according to the 3-2-1 scheme. The last module should be on the short side.
We do the second wing in the same way. We attach our wings to the chicken body on the sides.
Insert the red module in the center.
Now we start assembling our "house" for the chicken - to the shell. Let's start at the bottom. We collect the first four rows of 14 white modules.
In the fifth row, we increase the number of modules to 21. To do this, it is necessary to alternate the modules according to the scheme: connect 1 module, as before, and attach the 2nd and 3rd to one pocket and so on until the end of the row.
Add two more rows of 21 modules.
To complete our bottom part of the shell, it is necessary to add modules in places in the eighth and ninth rows, thereby simulating the appearance of a broken shell.
Well, the last detail of our craft is the upper part of the shell.
We collect 8 modules in three rows.
Modular origami is aimed at middle and young children. It is an additional education, a creative hobby and a method for the development of fine motor skills. These paper souvenirs will be a great gift for parents and friends. Origami can decorate a corner with crafts or a shelf with indoor flowers. This article will show you how to make chicken.
The amazing art of origami
Modular origami is the national Japanese art of folding various animals or paper figures. The art of this hobby is a mystery to all adults. This technology attracts children of all ages like a magnet. They are happy and curious to create incredible paper objects. Various images of animals, buildings, cars can be hidden in the folded sheet. In the children's fantasy, these images come to life. They have mixed feelings of joy, childhood, satisfaction from hand-made crafts. To get modular origami chickens, the assembly includes several simple steps. In the first stage, it is necessary to prepare in advance special paper for making crafts.
Preparation for work
All children love small, fluffy yellowish chickens. Such creatures cause tenderness, tenderness and a desire to protect them from the outside world. Particularly joyful emotions occur in children whom their parents call "my little chicken." The modular origami chicken is a symbol of childhood, bright sun and summer. To make this simple craft, you will need:
- Cardboard or thick colored paper.
- Scissors.
- Stationery glue.
- Stand or computer disk.
- Ruler.
To get a modular origami chicken without any complications, the master class should not last more than 1 hour. Children definitely need a break. Otherwise, such a craft making process can negatively affect the vision of children. The work area should be level and well lit. The best way to master the art of origami is on your desktop. The surface is preliminarily covered with oilcloth so as not to stain it with glue.
Manufacturing modules
Modules are small triangles. They are folded from cardboard or colored paper. To make a modular origami "Chickens", you need yellow paper. The aspect ratio of the sheet should be 1.5x1. Most often, such rectangles are folded from landscape A4. It is divided into 4 equal parts vertically and 4 equal parts horizontally. There should be 16 rectangles on one sheet. All sides are drawn with straight lines. Each rectangle should be approximately 74x53 mm. If the horizontal side is divided into 8 parts, and not 4, then the size of the rectangles will be 37x53 mm. It is allowed to add half a square. To do this, you need to use blocks for records.
- The rectangle folds in half.
- Another line is drawn in the middle and bent in half again.
- The workpiece turns upside down towards itself.
- The edges are folded towards the middle.
- Then the module is turned over.
- The edges are lifted up.
- The corners are folded over large triangles.
- Then they unbend.
- The triangles are folded along the marked lines.
- The edges go up.
- The workpiece is folded in half.
- A correctly formed module should have two small pockets and two corners.
To connect the modules to each other, they are inserted long and short sides. Depending on the scheme, different volumetric figures are obtained. Next, we will talk about making a voluminous chicken.
Assembling the chicken torso
To get the Chicken in Shell modular origami, the diagram includes 315 bright yellow modules and 7 red modules. Their size should be equal to 1/64 of the A4 landscape sheet. The first, second and third rows are assembled at the same time. This will require 66 modules of 22 for each row. In the first row, the modules are installed on the short side, and on the second, they are put on with the long side down. In the third row, the modules are also put on with the longest side down.
Then they should be closed in an even ring. The resulting circle is turned inside out so that the long side of the modules is directed outward. The 4th row also uses 22 modules. They are laid with the long side out. To get a modular origami chicken, the diagram repeats the following rows 5, 6 and 7 in the same way. The body of the figurine is rounded.
Assembling the neck and head of the chicken
In order to make a neck, 22 modules are also needed. In row 8, they are worn with the short side out. They must be placed vertically. To design the head, 22 modules are needed with the long side out. The next 5 rows are worn in the same way. A total of 14 rows should be done. The head is rounded. On row 15, the number of modules is halved. They are put on every second lower module. Then they should be closed closer to the center. You should have the perfect modular chicken origami.
Origami decoration with wings and tail
Instead of a beak, a red module is glued. It is positioned in the middle of the chick's head created. To create a scallop, 6 modules are assembled into a column. They need to be slightly bent with an arc. The scallop is then gently glued onto the chicken's head. To do this, it is used To create a ponytail and two wings, 2 modules are glued together.
Then three more are glued on their upper side so that the middle module is in the middle. Then the created wings must be inserted between the body. They are carefully glued with glue. A tail is glued to the back of the figure.
Origami decoration with eyes and eyelashes
To completely create a modular origami chicken, you need to make black eyes. To do this, you need thick cardboard or colored paper. Two small pieces with a diameter of no more than 4 mm are cut out of the material. The rectangle is also cut out. Then it must be cut in such a way that the cilia are obtained. Eyes and eyelashes are glued to the chicken.
Black circles can be dripped with office glue, white paint, or you can glue more circles of a different color on them. This will make your eyes more lively. You should get a modular origami "Chicken in an Shell". It is also allowed to use purchased eyes for decoration. They are usually sold at sewing or stationery stores.
Decorating crafts with grass
Cut straight rectangles from green cardboard. Their size should not exceed 3x5 cm. Then one edge of the rectangles is cut into several even parts. It follows the fate that the edge cannot be reached by more than 5 mm. Then the cut rectangles are twisted with scissors. A sharp side is drawn along the edge. Small paper curls are obtained. Then they can be glued to a board, thick cardboard or computer disk.
A chicken is glued to the center of the support. On such grass, you can glue butterflies, flowers, dew. To create a modular origami "Chickens", the craft can be made several times. Then you get a whole family of unpretentious yellow chickens. And to create mom and dad, you just need to take modules of a slightly larger size. Then the crafts will be larger.
Making crafts with shells
To make a modular origami "Chicken in Shell", you need white paper. It folds into special modules. Then the 36 modules are stacked with the short side up. On the second row, 36 long modules are superimposed on them. It is necessary to carefully bend the resulting craft in a semicircle. The modules are fixed with office glue. After that, they fold identically on rows 3-10. To create the effect of a broken shell, on the last row, the modules are put on every other. To get the perfect modular chicken-in-shell origami, the scheme for creating the second part of the craft is identical.
To create a hat, one part is put on the bottom of the craft, the other on the chicken's head. But it is worth noting that in this case, you do not need to make a scallop, since it will close with a shell.
Souvenir "Chicken on the grass". Master class with step by step photos.
Description. The master class is intended for children of primary and secondary school age, educators, teachers of additional education, parents and simply creative people who love to work with paper.Khvostikova Elena Aleksandrovna, teacher-organizer of the yard club "Ak zhelken", head of the circle "Needlewoman" DDT in Aksu, Pavlodar region, Republic of Kazakhstan.
Purpose: This souvenir will be a wonderful gift for your family and friends for your birthday, Mother's Day or March 8, Easter. In a group or in a classroom, such a craft will decorate a "living corner", it will look beautiful on a shelf in a children's room.
Target: making a souvenir "Chicken on the grass" from paper using the "modular origami" technique
Tasks:
- to acquaint with the technology of making souvenirs using the "modular origami" technique;
- develop fine motor skills of hands and an eye;
- to form the ability to follow oral instructions;
- develop artistic taste and creativity, activate imagination and fantasy;
- improve labor skills, form a work culture, teach to be accurate.
Origami is the traditional Japanese art of folding paper figures.
The art of origami is a mystery, and it beckons every child with incredible transformations. It's not even a trick, it's a miracle! Many images are hidden in a piece of paper. In the hands of the child, the paper comes to life. How much joy, how much delight! Children experience feelings of emotional comfort, a sense of childhood joy, an incomparable sense of satisfaction from a hand-made craft.
I suggest you plunge into the world of origami and make a small souvenir "Chicken on the Grass".
Yellow ball on the grass
It rolled merrily.
They say to the white light
He was born yesterday.
He is glad to the sun and warmth
Like any child
To midges, crumbs, worms ...
After all, the baby is a chicken.
R. Aldonina
The bright yellow soft and fluffy chicks are loved by most young children. They evoke feelings of affection, joy, a desire to protect and preserve. In adults, small chickens are associated with small children, it is not for nothing that they affectionately call their babies "my chicken." A chicken is a symbol of summer, warmth and sun, a symbol of childhood!
To make the Chicken on Grass souvenir, you will need:
- A4 size office paper yellow, red and green,
- scissors;
- ruler;
- PVA glue;
- used computer disk.
Chicken production step by step.
To make a chicken, you will need 7 red and 315 yellow modules in the size of 1/64 A4 sheet.
We begin to collect the first, second and third rows at the same time.
1 row - put 22 yellow modules on the short side
2nd row - put on 22 yellow modules with the long side down.
3 row - put on 22 yellow modules with the long side down
We close them in a ring.
We turn it inward so that the long side of the modules "looks" outward.
4th row - 22 yellow modules with the long side out.
We put on rows 5, 6 and 7 in the same way.
Give the body a rounded shape
We make a neck: in the 8th row we put on 22 modules with the short side outward, placing them vertically. In the photo, the modules of the 8th row are shown in red for clarity. In fact, all modules are yellow.
Let's start shaping the chicken's head.
9 row - 22 yellow modules again with the long side out.
In the same way we put on 5 more rows (i.e. 10, 11, 12, 13, 14 rows).
Give the head a rounded shape.
15 row - we put on 11 modules through one (i.e. we put on one, we skip one ...)
We close the modules as close to the center as possible.
Let's start decorating the chicken.
We glue one red module instead of the beak.
We make a scallop from red modules. To do this, we collect 6 modules in a column and slightly bend it with an arc.
We glue the comb on the head with PVA glue.
We make wings and a tail from the yellow modules, as shown in the photo.
We insert the wings between the modules of the body, fix it with glue.
Glue the tail on the back.
Now we need to make the eyes.
To do this, cut out two circles with a diameter of 4 mm from a small strip of black cardboard. and cilia.
You can use ready-made eyes purchased at the store.
We glue the circles to the eyelashes. The eyes are ready!
We glue the eyes to the chicken.
To make the eyes look alive, you need to apply small white spots - glare with a corrector.
Step-by-step design of a souvenir.
Cut into rectangles about 5x3.5 cm in size from green office paper.
Cut them on one side without reaching the edge of 5 mm. Twist the "blades of grass" with scissors.
Glue the "blades of grass" in a circle onto the disc.
Glue our chicken to the center of the disc. For beauty, flowers or a butterfly can be added to the grass.
Three little chickens
Three yellow cannons.
- Who are they, three chickens?
Are they three cockerels?
Mother answered her son:
Let's wait my friend
Who will sing Ku-ka-river,
The one and the cock!
R. Aldonina
If we make a shell of white modules for our chicken, we will get a completely different souvenir.
Little chicken
I was born from an egg,
I got out of the shell
I was very surprised!
How light it is outside
How much space is there
There, inside the shell,
There was no such thing!
E. Shevtsova
