A sense of style is an important stage in the formation of personality, and mothers of girls undoubtedly know about this. By example, it's a great start in learning a sense of style. "Adult" clothes can also help a little fashionista to better understand the trends and learn how to properly combine wardrobe items.
Nowadays, most things for children are small copies of an adult wardrobe. These are jeans with stitched pockets and seams, dresses with soft corsets and even children's underwear. A jacket will be an excellent option for the basic wardrobe of a little fashionista. This is a truly indispensable thing when it comes to walking, visiting or getting ready for school.
"Adult" jacket
School uniform is hard to imagine without a traditional skirt, blouse and jacket. Usually, a classic children's jacket is a jacket with a collar that fastens with buttons, less often with a zipper. Such a model traditionally has long straight sleeves, small pockets or their imitation and a turn-down collar.
School uniform - yes and no
Classic jackets for girls are usually made of black suiting fabric and do not have a pattern. These monochromatic models look boring, which is why mothers often hear that their daughter "will no longer go to school in this awful jacket." You can revive this nondescript wardrobe item and not go beyond the school discipline in different ways.
Method 1. Fabric
For sewing a jacket for a school uniform, you can choose a fabric with a small pattern. Models made of dense gray material with velvet trim look great. Any fabric in a contrasting color or texture can be used to highlight the details.
If the school uniform allows some deviations from the norm, you can make a jacket from fabric in a cage, which has remained at the peak of popularity for quite some time. The materials of red and green shades are especially fond of fashionistas, and models of warm brown or olive shades remind of the restrained English style.
Method 2. Cut
Jackets of interesting cut will help to diversify the schoolgirl's wardrobe. A classic straight jacket can be made to fit or add a belt made of fabric in a contrasting color to it. Fold-over collar can be successfully replaced with a stand-up collar, as well as add another row of buttons to the model. An alternative to such a jacket can be an elongated version with large patch pockets, which is made "just like an adult". In combination with straight trousers and a shirt for release, such a jacket will help the girl to look unusual and stylish.
Method 3. Additional elements
A child will look differently at a classic black jacket if a peplum is sewn to it. Basque models are at their peak of popularity today. This piece can be cut from fabric with a bias pattern or used as a pattern. plain tape desired width, which must be gathered and sewn to the waist.
Knitted children's jacket
An integral part of any children's wardrobe is knitted jacket... Knitted from threads of voluminous texture in fashionable brown or beige shades, such a thing allows little fashionistas to create their own unique image.
Little Coco
A jacket in the style of Coco Chanel is not only a well-known model of an adult wardrobe, but also an exclusive one in any girl's wardrobe. Shortened versions of jackets are comfortable and practical, easy and quick to sew thanks to a simple pattern. Models made of light fabrics with short sleeves will be an excellent addition to dresses and fluffy skirts, and in a jacket made of warm textured fabric you can go for a walk, to school or to a celebration.
The variety of design options and the versatility of the jacket allows you to combine it with almost all items of children's wardrobe, and girls always look fashionable and stylish.
| Size (GOST) | Height, cm | Chest girth, cm | Waist girth, cm | Download pattern |
| 28
Age 2 years |
A cropped jacket with small sleeves is a great option school uniform... This jacket harmoniously combines a strict silhouette and soft lines.
Download the pattern of a cropped jacket for a girlis free can be on the following links:
* As a result of payment, you will be automatically sent a file with a pattern to the specified by you email... If the file has not arrived, then you need to check whether you entered the correct postal address when paying. If the postal address is correct, but the file has not arrived, you must immediately contact the address [email protected]
** You can offer your payment option in the feedback of the site
The patterns are given without seam allowances.
The set of patterns:
A stylish model of a cropped jacket for a girl with short sleeves will be an excellent alternative to a school uniform. The strict fitted silhouette of this model will be perfectly combined with trousers or a skirt. Soft embossed lines, rounded hem, neat strict collar and original small sleeve make this jacket feminine and elegant.
Cut from main fabric:
... the central part of the back - 2 parts;
... the central part of the front - 2 children;
... front barrel - 2 children;
... back flank - 2 children;
... pick-up - 2 children;
... sleeve - 2 children;
Non-woven details:
... collar - 2 children with a fold;
... back neck facing - 1 pc. folded
... pick-up - 2 children
... back hemstitching - 2 children.
When cutting parts, it is necessary to leave allowances for seams and cuts - 1.5 cm, for hemming the sleeves - 4 cm. And also you need to make notches on the parts for correct alignment.
Stages of work:
1. Iron the non-woven fabric to the details of the collar, hem, trim of the neck of the back and trim of the bottom of the back.
2. Fold down the details of the central part of the back obverse inside and make a middle seam.
3. Sew darts on the shoulder sections of the back and press them to the middle of the part.
4. Fold the front flank right side to the front side of the central part of the front and make embossed seams, aligning the notches.
5. Press the cuts to the middle of the shelf part and process on an overlock.
6. Sew the raised seams on the back of the shelf by folding the back flank and the center of the back with the right sides inward. Press the seams on the back and overlock.
7. Make notches to align the sleeves at a distance of 0.2 cm from the seam.
8. Stitch side and shoulder seams. Sections are ironed on the central part of the back.
9. Gather the sleeves along the bend to the desired size. Press the bottom of the sleeves inward by 4 cm, and topstitch or fasten by hand as desired.
10. Sew the sleeves into the armholes, starting from the shoulder seam, aligning the center of the sleeve with the shoulder seam.
11. Fold the two collar pieces right sides inward and sew. Cut off the seam allowances along the outer cuts and turn them out onto the face. Iron the outer edge and add a finishing line if desired.
12. Taking the open cuts of the collar together, sweep in and stitch it into the neckline, aligning the notches with the shoulder seams, starting from the mid-front line.
13. Attach the hem with the right side to the right side of the front part and stitch along the outer edge and neckline. Cut off seams close to stitching, turn right out and iron on outer edge.
14. Sew the back neckline facing to the hem and to the edge of the back neckline on top of the collar stitching seam.
15. Attach the hem of the bottom of the back to the lower edge of the back part with the right sides inward and stitch it. Cut seams close to the stitching and unscrew the piping seamy side jacket.
16. Sew the edges of the piping to the edges of the hem and fix the piping manually on the raised seams.
17. Sew three welt loops on the front part and sew on buttons to match the jacket fabric.
Summer is rapidly coming to an end, and with it the school holidays. On September 1, boys and girls will sit down at their desks again, meet with their classmates and teachers. And in order for them to be comfortable at school, they need a comfortable school uniform. We have already published patterns for a jacket, trousers and a shirt for a boy, and now, according to your numerous requests, we offer a pattern for a jacket for a girl.
This jacket for girls with reliefs, pockets with rounded flaps and two-seam sleeves is a real godsend for the first cool days of September! And with the help of our step by step instructions you can sew such a jacket yourself.
ADVICE! So that the patterns open in full size- open each one in a new window!
Jacket pattern for a girl: take measurements
Rice. 1. Pattern of a jacket for a girl - take measurements
To construct a jacket pattern, we need to take the following measurements (size 32):
Height - 128 cm
--------------– 1/2 volume
Chest circumference - 64 cm 32 cm
Waist girth - 54 cm 27 cm
Hip circumference - 66 cm 33 cm
Neck circumference - 28 cm 14 cm
Shoulder length - 10 cm
Arm length - 40 cm
Back length to waist (DTS) - 28 cm
Front length to waist (RTA) - 30 cm
Back width (SHS)
Chest width (WD)
The length of the jacket on the back is about 43 cm.
The increase in freedom of fitting to the half-girth of the chest is 3 cm. Distribute the increase as follows: to the back - 0.7 cm, to the armhole - 1 cm, to the front - 1.3 cm.
How to measure the width of the back (SH) and the width of the chest (SH), see fig. 1.
Jacket pattern for a girl - construction
Rice. 2. Pattern of a jacket for a girl - construction
We start building a pattern for a jacket by building a grid. The width of the mesh AB = 35 cm (half-girth by the measure + 3 cm (an increase in the freedom of fitting for all sizes)). The length of the AC mesh = 43 cm - the length of the jacket as measured.
Armhole depth. AG = (the depth of the armhole by the measure + 1 cm). Draw a horizontal line to the right from point G. Designate the point of intersection with the aircraft Г1.
Waistline. AT = Back length to waist (DTS) + 0.5 cm (increase in shoulder pads) - point T. Draw TT1 parallel to AB.
From point A put to the right 1/2 Width of the back to measure (SHS) + 0.7 cm - point P. From point B put to the left 1/2 Width of the chest to measure (WG) + 1.3 cm - point P1. From the obtained points, lower the perpendiculars to the line ГГ1 - points Г2 and Г3 are obtained.
Auxiliary points of the armhole of the back and front. Divide PG2 and P1G3 into 4 equal parts.
Building a pattern for the back of a jacket
Back neck. From point A put aside 5.5 cm to the right (1/3 of the half-girth of the neck by measure + 0.5 cm: 14/3 + 0.5 = 5.5 cm) and up 1.5 cm.Connect points A and 1.5 concave line.
Descent of the shoulder. from point P put down 1.5 cm. Connect points 1.5 (neck) and 1.5 descent of the shoulder with a straight line, continue the line. Set aside 11 cm (measured shoulder length + 1 cm for all sizes: 10 + 1 = 11 cm). The shoulder of the back of the jacket is seated when sewing.
Back armhole line. Draw a bisector 2 cm long from the corner with the apex at point G2. From point G2 set aside 2 cm to the right and 1 cm up. Draw the line of the armhole of the back from the extreme point of the shoulder, the midpoint of the division PG2, point 2 (bisector of the angle), to point 1.
Back side line. From point 1 (the lower point of the armhole of the back) draw a vertical line to the line CD, point T2 is obtained at the waist, the intersection with GG1 is point G4, the intersection with the line DC is point H.
Calculation of darts at the waist. General solution of darts at the waist: Bust half - Waist half = 32 cm - 27 cm = 5 cm. Distribute the darts - from point T2 to the left, set aside 2 cm - into the side dart of the back, 1 cm - to the right - the side dart of the front. Connect points G4, 2 and N.
The middle line of the back of the jacket. If necessary, you can fit the jacket along the line of the middle of the back. In this case, the dart is built from point T with a depth of about 1-1.5 cm and smoothly reduced to point G. However, so that the jacket does not turn out to be narrow at the hips, the girth of the hips should be checked after building the pattern.
Building a pattern for the front of a jacket
Front neckline. From point B to the left, set aside 5.5 cm (1/3 of the half-girth of the neck by measure + 0.5 cm: 14/3 + 0.5 = 5.5 cm) and down 6.5 cm (1/3 of the half-girth of the neck by measure + 1.5 cm: 14/3 + 1.5 = 6.5 cm). Connect points 5.5 and 6.5 with a concave line.
Raising the front shelf. Through point 5.5, draw a vertical dotted line up and down - to the waist line - point T3. From point T3 put aside the length of the front to the waist according to the measurement (RTA) + 0.5 cm, point B1 is obtained.
Descent of the shoulder of the front. From point P1, postpone visas 2 cm. Draw a segment B1P1 equal to the length of the shoulder to measure.
Front armhole line. From the corner with the apex at point G3 draw a bisector 2 cm long. Draw the armhole line of the front from the extreme point of the shoulder, the lower dividing point P1G3, point 2 (bisector of the angle), to point 1, touching the segment G3G4.
Shelf relief line. Draw a smooth relief line from the midpoint of division P1G3 to the DC line. Designate the point of intersection with the waistline T4.
Darts at the front waist. From point T4 to the left and to the right, set aside 1 cm each, smoothly connect with the relief line. The top of the dart is 5 cm below the armhole line.
Surcharge on board. From point C, set aside 3 cm to the right and 1.5 cm down, draw a vertical line of approach to the fastener. Arrange the side line as shown in the pattern drawing.
Pocket flap and flap. Mark the pocket entry point and pocket flap configuration as shown in the pattern drawing. Mark the trim line and reshoot the trim separately on tracing paper. The configuration of the flap of the pocket and the lapel of the jacket can be modified, depending on your preferences.
Construction of a collar and sleeve pattern for a jacket for a girl
Rice. 3. Pattern of a jacket for a girl - building a collar
The pattern of a double-seam sleeve and a pattern of a collar for a jacket for a girl is constructed in the same way as a pattern for a collar for a jacket for a boy. One-piece collar with detachable collar edge.
The details of the pattern - back, flank, shelf, hem, collar and both parts of the sleeve are reshaped separately and cut out with allowances for seams - 1.5 cm, allowances on the bottom of the jacket and sleeves - 3 cm. completely duplicate the details of the pocket flaps and both hem of the jacket with thermal fabric.
The difficulty level of the model is simple, but it will take time
Technical drawing of the model:
When ordering a pattern, you receive a pdf file with one large sheet, which can be printed * on 16-20 A4 sheets, after gluing which you will receive one large sheet with the outline of the patterns:
* To print a pattern in real size, you must select "Poster" in the "Adjusting page size and handling" section when printing in Adobe Reader. Then the image will be automatically divided into the required number of A4 fragments. If your version of Adobe Reader does not have the "Poster" function, you need to download the latest version of this program from the link https://get.adobe.com/ru/reader/ (this is a licensed free program). If you still have questions - visit our FAQ section!
The following designations are adopted on the pattern:
.png)
Difficulty level: simple, but it will take time.
Would need: Suit jersey 1.5m wide 0.46m-0.48m-0.54m -0.57m-0.58m -0.62m- 0.65m -0.7m -0.8m -0.81m - 0.85 m, doublerin 0.9m wide 0.31m long -0.31m -0.33m - 0.35m - 0.35m - 0.37m -0.37m -0.39m -0.41m - 0.42m - 0, 44m, buttons 3 pcs
Cut details:
From the main material:
- Shelf - 2 children
- The side part of the shelf is 2 children.
- Back side - 2 children
- Backrest - 1 child folded
- Podbort - 2 children.
- Pocket - 2 pcs.
- Sleeve 2 pcs.
- Shuttlecock sleeves -2 children.
- Collar - 2 pcs.
From adhesive material:
- Podbort - 2 children.
- Backstitching 1 piece folded
- Collar - 1 piece
Allowances: on the seams and along the cuts - 1.5 cm, on the hem of the bottom - 2.5 cm.Parts from the adhesive material should be without allowances along the cuts of the bead and the outer cut of the collar (fly away)
Layout example:
The fabric is folded in half.
The long-awaited September has arrived, and with it the time for schooling. This is a special period for parents and children, and we all prepare for it in advance. Today we want to offer you an excellent solution - a pattern of a jacket for a boy, which you can sew yourself for your child. And you can build a pattern yourself according to our instructions, and by buying even an expensive fabric, you can save a lot, since high-quality jackets are very expensive.
Jacket for a boy - details
Fig. 1. Jacket for a boy - front and back
Building a pattern for a jacket
- Height - 146 cm
- Jacket length - 55 cm
- Back length to waist - 32 cm
- Front length to waist - 33.5 cm
- Shoulder length - 11 cm
- Semi-girth of the neck - 16.5 cm
- Semi-girth of the chest - 38 cm
- Sleeve length - 52 cm
- Waist half-girth - 32 cm
- Semi-girth of the hips - 34 cm
- Back width - 14 cm
- Armhole depth - 16 cm
Generating a mesh pattern
Fig. 2. Pattern of a jacket for a boy
Draw rectangle ABCD.
Jacket length. The length of a jacket for a boy is determined by the model, based on the wishes of the customer. Measured along the back from the seventh cervical vertebra to the desired length. AD = BC = 55 cm.
Jacket width. AB = DC = 38 + 3 = 41 cm (half-circumference of the chest according to the measurement + 3 cm for freedom of fitting).
IMPORTANT! The value of the increase in freedom of fitting may vary depending on the silhouette of the jacket: fitted, semi-fitted or loose - from 3 to 8 cm.
Armhole depth. Put 17.5 cm down from point A - point G (the depth of the armhole by the measure is + 1.5 cm). The depth of the armhole can be measured or calculated using the formula: 1/3 bust half + 5 cm (38/3 + 5 = 17.7 cm). If the measured value differs from the calculated one, take the average between them. Draw a horizontal segment ГГ1 from point Г to the intersection with the BC line.
Waistline. From point A, lay down 32.5 cm (the length of the back to the waist by the measure + 0.5 cm) - point T. From point T, draw a horizontal segment TT1 to the intersection with the line BC - point T1. The addition to the length of the back to the waist is given taking into account the shoulder pads (in this case, the waist line will rise slightly).
Back width. From the point G to the right, set aside 15 cm (the width of the back by the measure + an increase in the freedom of fitting 1 cm), put the point G2. Draw a straight line from point G2 up to AB - point P.
Armhole width. From point G2 to the right, set aside 10.5 cm - point G3 (1/4 of the half-girth of the chest by measure + 1 cm for all sizes): 38/4 + 1 = 10.5 cm. From point G3 draw a straight line upward, the point of intersection with line AB - point P1.
Jacket flank. From point G2, set aside 2 cm to the right - point G4. From point G4, lower the perpendicular to the DC line - point H. Put point T2 on the waist line.
Auxiliary lines of the armhole. Divide PG2 and PG3 into 4 equal parts.
Jacket pattern for a boy - building a back
Neckline. From point A to the right, set aside 6 cm (1/3 of the half-girth of the neck by measure +0.5 cm for all sizes): 16.5 / 3 + 0.5 = 6 cm.From point 6, set aside 1.5 cm upward, connect the point 1.5 with point A as a concave line.
Back shoulder line. From point P, lay down 1.5 cm. From point 1.5 (neck) through point 1.5 (descent of the shoulder) draw a shoulder 12 cm long (length of the measured shoulder + 1 cm for all sizes). The shoulder of the back is seated when sewing.
Back armhole line. Draw the bisector of the angle Г2 2 cm long. From the point Г4 set aside 1 cm. Draw the line of the armhole through points 12, through the midpoint of dividing PG2, through point 2 to point 1.
Back side seam line. From point T2 to the left, set aside 2 cm, connect with points G4, 1 and N.
The middle line of the back. From point T to the right, set aside 1.5 cm and draw a new line for the middle seam of the back.
Neckline. From point B to the left, set aside 6.5 cm (1/3 of the half-girth of the neck by measure + 1 cm for all sizes): 16.5 / 3 + 1 = 6.5 cm.From point B, put 6.5 cm down (1 / 3 half-girths of the neck to measure + 1 cm for all sizes): 16.5 / 3 + 1 = 6.5 cm.Concave points 6.5 and 6.5 with a concave line.
Front length to waist. Through point 6.5 (front neck) draw a perpendicular up and down to the waist line - point T3. From point T3, lay up the length of the front to the waist by measuring + 0.5 cm - point B1.
Front shoulder line. From point P1, lay down 2 cm, draw a shoulder line from point B1 through point 2 with a length of 11 cm (shoulder length as measured).
Front armhole line. From point Г3 draw a bisector of the angle 2 cm long. Draw the armhole line through points 11, the lower division point П1Г3, point 2, touching the line ГГ1 to point 1 (back armhole).
Barrel front line. From point T2 to the right, set aside 1 cm, connect with points G4 and N. From point 2 (bisector of angle G3), lower the perpendicular to the line DC. From point T4 (intersection with the waistline), set aside 1 cm to the left and to the right. Draw the right dart through points 1-1, not reaching 6-7 cm to the CD line.
DUCT CONTROL: To prevent the jacket from being too narrow at the waist and at the hips, it is necessary to control the darts. Measure or calculate the resulting half-girth of the waist and hips: 41 (mesh width) -6.5 (total depth of the darts) = 34.5 cm. The half-girth of the waist is 32 cm, therefore, we do not change the depth of the darts. If the value in the drawing is less than that measured with an increase, the depth of the darts should be reduced. In a similar way, control the girth of the hips. For certain shapes, the middle seam of the back can be left straight.
The bottom line of the front of the jacket. From point C, lay down 1.5 cm.
Closing the fastener (jacket side). From point 6.5 (neck) and from point C, set aside 3 cm to the right. Draw a vertical line. Design the lapel lapel and bead according to the pattern.
Jacket pockets. Outline the entrances to the pocket and the configuration of the flap of the lower and leaflet of the upper pocket, as shown in the pattern drawing. The shape of the bottom pocket flap is determined by the model and customer preference.
Fig. 3. Details of the cut of the jacket for the boy
Separately reshoot the details of the jacket from the pattern. Reflect the leaflet along the long side and cut it out with a fold. Additionally, build a jacket slot (according to the model, a jacket with two slots on the back) 4 cm wide and 1/3 the length of the product. Reshoot separately.
Next, we move on to building and two-seam sleeves to the jacket. Read the collar pattern construction in the next newsletter!
