The proposed technique for constructing a skirt pattern is more suitable for proportionally folded, so-called standard shapes. This technique is just as good for mass-making skirts.
And, of course, with its help, you can build a pattern for any shape and correct it at the first fitting, taking into account all the individual characteristics of a particular person.
This technique is as old as the world. And since she is so tenacious, let's get to know her.
For figures whose parameters do not fit into generally accepted standards, I would recommend using other techniques that take into account all the nuances of a particular figure at the stage of calculating and constructing a pattern.
We bring to your attention another technique for constructing a pattern of a straight skirt. If the previous technique is designed for the so-called standard shapes and is more suitable for mass sewing, then this technique is good because it can be used to construct a pattern for any shape, including a shape that deviates from generally accepted standards. This technique, in comparison with the previous one, takes into account some of the individual characteristics of a particular person.
There are even more precise techniques, methods and techniques used to construct patterns for individual tailoring of skirts. We'll get to know them later.
We start by taking measurements.
A ready-made life-size pattern of this season's fashionable skirt. The front is a year-old skirt and the back is a flounced skirt. There are high pleats on the sides of the middle wedge of the skirt. The skirt has pockets in cut-off barrels.
A skirt with a flounce, like a year-old skirt, always looks spectacular and stylish.
This style suits almost any woman.
Choose the fabric for your skirt responsibly. Fashionable quality material is half the battle. And when the skirt is ready, pick up a blouse, fashionable shoes for it, "finish" the image with a stylish hairstyle, add accessories and go ... to work, for a walk or to the theater.
A skirt with a flounce goes well with a short jacket or jacket, as well as with a loose silk blouse tucked into a skirt. You can wear such a skirt with a turtleneck or a sweater, but here it is important to choose the right length of the above things - it (length) should be no more than 10-15cm below the waistline.
A full-size floor-length skirt pattern is suitable for girls with a waist circumference of 100-104-108-112 cm.
The pattern is sent instantly to your e-mail (to your e-mail address). You don't need to download anything. The pattern file is located in the attachment letters. You open, print, glue the sheets, cut out the size you need and you can start cutting.
Maxi skirt for plump, slightly widened at the bottom made of soft comfortable fabric. In the left side seam there is an incision of a moderate height (slot).
According to the proposed pattern, choosing the appropriate fabric, you can sew a skirt for the off-season, and for winter, and for summer. Fabric consumption is approximately 2.2-2.3 m with a width of 1.5 m.
Choose soft dress fabrics for sewing a skirt. Pay attention to the fabrics in blue shades, they perfectly hide the volume. You can also recommend fabrics in a cage, when cut along an oblique, they visually stretch the figure.
Actually, the color of the fabric is a matter of taste. Experiment for your own pleasure.
Another skirt for the modern business woman's wardrobe.
The classic pencil skirt has a ton of options. These are various undercuts, yokes, folds, etc.
The offered model of a skirt for full front has a classic look, and the back panel of the skirt is decorated with a wide flounce.
The finished pattern of a pencil skirt is designed for girls and women of curvaceous shapes with a hip girth from 116 to 128 cm.
Sewing this skirt model will not seem difficult even for novice dressmakers.
A variety of fabrics are suitable for sewing, and the final result will depend on this choice. Gabardine, loose suit and dress fabrics, taffeta, thick silk, etc. are ideal.
Women with curvaceous forms are required to be able to dress beautifully and choose clothes that will favorably emphasize all volumes.
Today there is a large selection of plus size dresses, skirts, trousers, blouses for women on store shelves. And we want to talk specifically about skirts and find out which models are worth choosing. Also, we have not forgotten about the needlewomen who love to please themselves and their loved ones with fashionable new clothes. We also collected patterns of skirts for obese women, found a description and diagrams of how to knit and crochet a fashionable stylish model.
What styles of skirts are ideal for obese women (photo)
I want to start with what all the same models should be chosen by "non-standard" women, because a girl should always remain feminine and graceful, and all the shortcomings can and should be hidden with the help of correctly selected clothes, emphasizing the merits.
Many people think that clothes for overweight are absurd and dimensionless, unremarkable things. They are deeply mistaken. A woman with large breasts and spectacular hips looks much sexier than a skinny woman, and accordingly things look better on her. Therefore, today, when everyone said goodbye to complexes about extra pounds, designers sew beautiful outfits specifically for women of the "+" size.
So, the most ideal style is pencil skirt... She perfectly adjusts the figure and is perfect for any occasion. With her, you can create many interesting images, and the main thing is that even ladies with belly can afford them. She will hide it and create a smooth transition.
Popular articles:
Skirt "sun" full fashionistas can also try on, but on condition that the top is tight-fitting and discreet.
"Tulip" adjusts the figure well, so take note and look after such a model in the store.
Basque models also have the right to be in your wardrobe.
Do not forget about vertical print, which visually stretches the figure, making it slimmer.
Models such as godet, mini, thin knitted tight-fitting, with a large print, an abundance of ruffles and rhinestones, trapeze are strictly prohibited.
How to sew a skirt with your own hands (patterns and description)
In order to create a new product at home, you need to have:
- sewing machine
- threads
- a needle
- scissors
- the cloth
- millimeter or a ready-made basic pattern of a skirt
- crayon
- tape measure
A very important stage is the construction of a pattern. There are two ways: constructive and dummy. The dummy method is the easiest and does not require calculations and data, but it cannot do without outside help. The constructive method requires accurate calculations, but it is the most correct and makes it possible to create the perfect pattern.
Fake way.
Constructive.
How to sew long skirts without a pattern
There are styles that can be sewn without a pattern and special skills of a seamstress. To do this, you only need to know the length of the product and the size of the waist. As a result, you will get a very original and simple thing, for which you will have to pay a lot in the store.
Cutting consists in cutting off a strip of fabric, the length of which is equal to the length of the product + a seam allowance (hem at the bottom) + a belt allowance. About 4 cm will go to the hem along the bottom, and about 10 cm to the belt (similar to the hem, it will just be wider). As a result, the required length = product length + 14 cm. You can experiment with the width. The more fabric, the more voluminous the product will be, so here you fantasize yourself or just use all the available material.
After cutting off the required piece of fabric, start with the side seams. Newbies can make money first.
Next, we work on the bottom seam and proceed to the belt. We sew the belt in the same way as the bottom of the product, we just retreat the required amount of cm (we put aside 10 cm). Insert the elastic and voila, the chic new outfit is ready!
Create a stylish straight model
The pencil skirt is also called "straight model", which means that now we will learn how to sew the most stylish and versatile skirt that suits everyone.
To build a drawing, you need to know the length of the skirt, the semicircle of the waist, semicircle of the hips and, based on these data, create a pattern (see the video above).
You should end up with something like this.
After transferring the pattern to the back of the fabric (remember to leave 2 cm for the seams), you can start sewing.
Sewing the product:
- Stitch darts on the front and back, iron the seams with an iron.
- Stitch side seams, leaving room for zippers.
- Sew on the zipper.
- Process the bottom of the product.
- Process the top of the product.
Everything is ingenious and simple, the main thing is to have a little free time and a little patience.
Knitting of skirts (schemes and description)
Winter is a great time for knitted things, so with the onset of cold weather it's time to start creating knitted patterns. And in the summer, crocheted fishnet skirts will be popular. You can create light and airy styles that will look beautiful on ladies with curvaceous shapes.
Knit straight pencil skirt from VICTORIA`S SECRET
First you need to take measurements or take a ready-made skirt of your size.
Necessary:
- 800g wool yarn
- knitting needles No. 4-4.5
The product is knitted from bottom to top, but first you need to knit a sample with garter stitch to determine the density of knitting. Calculate how many stitches and rows there are for 1x1 cm. This will become the basis and you will be able to dial the correct number of stitches for your hip size. If you decide to knit in a circle, use circular knitting needles (this way you will not have a seam).
On the sides - “pearl pattern”, in the center - “aron pattern”.
Pearl Pattern: alternately 1 person, 1 N., shifting the loops after every 2nd row.
Aran pattern: knit according to this pattern.
We begin to knit with an elastic band (knit 2, purl 2), which must be knitted 2 cm. Further, the main “pearl pattern” and “arona pattern”. On the sides, make subtractions, as in your pattern. In the waist area - 8-10 cm 2x2 elastic bands (alternate 2 facial, 2 purl).
Crochet lace skirt
Product size - 56.
Required: 650 g of fine yarn, hook No. 1.3 mm.
Knits very easily, provided that you have a pattern of your size. You should start from above with a simple pattern, then tie 8 motifs and attach to the panel. Further, the skirt expands a little and the bottom already consists of 9 squares.
READY PATTERN FREE.
Feminine, elegant, moderately sexy and equally strict - all these qualities in a woman will help to express and emphasize the PENCIL SKIRT in full measure.
Today, a pencil skirt can be sewn from a wide variety of materials, including leather, velvet, silk, knitted and lace fabrics, etc. Any color! And if earlier FASHION insistently recommended wearing a pencil skirt only with high-heeled shoes, now the same fashion claims that a pencil skirt goes well with low-soled shoes.
In previous articles, we presented you with several options for different sizes, today another proposal on the same topic.
READY PATTERN FREE.
READY PATTERN FREE.
Pencil skirt is a kind of lifesaver for women of any age, any build. In our time, it is more multifaceted than ever before. Depending on the length, the presence of reliefs or other structural elements, on the material, finish, etc., a pencil skirt can be completely different and appropriate in a variety of situations.
Finished pattern two-embossed pencil skirts on the front panel, on the back panel there is a middle seam into which a zipper is sewn. In the same seam at the bottom of the skirt, there can be a slit, slot, fold or shuttlecock. We deliberately do not mark any marks on the pattern of the rear panel and do not give any allowances, leaving the choice up to you. Give a machining allowance according to your decision.
How to build a skirt pattern for a specific figure according to the measurements taken(step by step instructions) can be viewed.
Modeling a pencil skirt described earlier in several versions.
The "year" style skirt is an emphasis on femininity and showiness.
The skirt-year fits perfectly into the work environment and may well take place as a participant in the New Year's ball. It all depends on the design solution and on the choice of fabric.
Today our attention is directed to girls and women, whose girths exceed certain conventions, called the standard.
Therefore our ready-made skirt-year suitable for ladies with waist 89cm, hips 116cm.
The offered skirt of the "godet" style consists of eight gussets, with pockets and a stitched belt. Skirt length 76cm.
Preparing a pattern for work is extremely simple.
Click on the diagram at the end of the article and skirt pattern will open in a new window.
Print the pattern sheets on the printer, cut and connect them in accordance with the diagram.
In our wardrobe, among many different outfits, there are long-lived things.
Their usefulness and necessity have been tested by time. This includes a skirt.
Classic straight skirt with a slit in the back(instead of a slot there may be a fold or a cut). With a skillfully chosen length, it will suit any woman.
Today we pay attention to girls with forms. This ready-made pattern of a classic straight skirt with a slot in the back.
This article gives the construction of pattern drawings for several styles of skirts at once. These are such popular styles for all women as a straight classic skirt (pencil skirt), a half-sun cut along an oblique skirt and the widest model of a skirt at the bottom - a sun skirt. Recommendations are given for constructing a pattern of a skirt flared to the bottom, consisting of several wedges, as well as advice on how to calculate and lay the tucks on the skirt in a fold.
Measurements for constructing patterns and fabric consumption
To build a drawing, you will need to take only three measurements: waist circumference; hip girth; skirt length. But keep in mind that to build the drawing, their half values are used, except for length measurements. The half values of the waist and hip measurements are designated St, Sat, respectively, the half-girth of the waist and hips.
In order for the skirt pattern to be as accurate as possible, you need to correctly take these measurements, so in case of difficulty, you can see the article on the site How to take measurements for a dress. It shows in detail and clearly how to take measurements for a skirt.
Do not forget that when sewing any clothes, when building a drawing of pattern details, it is required to make allowances for free fitting in the calculations, which in these calculations are indicated by Fri, Pb, etc.
The consumption of fabric for sewing a skirt depends primarily on the volume of the hips and secondly on the chosen style of the skirt. So girls whose hips exceed 130 cm will have to buy two lengths of fabric, even for sewing a straight skirt. Up to 130cm, one skirt length is enough plus hem and belt allowances. As for the style of the skirt, for example, a sun skirt may require 5 meters of fabric 150 cm wide. Be prepared for this, and you will find out the more accurate fabric consumption when you build a skirt pattern.
To construct a drawing of this straight pattern, the following measurements were used: St = 38cm, Sat = 52cm, Di = 54cm. Increases Pt = 1cm, Pb = 1cm.
Before you start building a pattern, prepare paper, pencils, a ruler, felt-tip pen, tape and scissors. The pencil should be soft, the felt-tip pen is useful for marking points and main lines, and tape is useful for gluing paper. See How to make a pattern and other tips for beginners.
To build a pattern for a straight skirt, it is convenient to use graph paper. The paper grid allows you to quickly and accurately mark key lines. You can use another type of paper (tracing paper), but in any case, first build a right angle with the vertex T.
The level of the hip line for typical and close to them individual figures: TB = 19.5 cm.
The level of the bottom line TH = Di = 54cm. From the obtained points T, H, B, draw horizontal lines at a distance of 53 cm and put points T1, H1, B1. This distance is determined by the formula Sb + Pb = 52 + 1 = 53cm.
Now the pattern mesh needs to be divided in half, into the front of the skirt and the back. The vertical line passes through point B2, calculated by the formula BB2 = (Sb + Pb) / 2 - 1 = 25.5 cm.
For full figures with a large belly, the back and front panels of the skirt are designed with the same width.
From point T2, set aside 1-1.5 cm up and make a mark. Now you need to set aside 3.5 cm segments from the same point to the left and right and draw with a smooth line the upper part of the side line of both halves of the skirt and a slightly raised part of the waist line.
The amount of darts is calculated by the formula (Sat + Pb) - (St + Fri) = (52 - 1) - (38 + 1) = 14cm. This amount is divided by two and two darts will be 7cm. Moreover, the rear dart will be larger than the front one in the following proportion: the rear one is 14/3 = 4.7 cm, and the front one is 14/6 = 2.3 cm (4.7 + 2.3 = 7).
The position of the rear dart is determined by the formula BB3 = 0.4 x BB2 = 0.4 x 25.5 = 10.2 cm.
Front dart position B1B4 = 0.4 x B1B2 = 0.4 x 27.5 = 11cm.
The back dart ends 4-5cm above the hip line, the front dart ends 10cm above the hip line.
The narrowing of the skirt is 1-2 cm, they are evenly laid to the right and left of the H2 point.
For freedom of movement, slots, folds, and cuts are often made on the back panel of the skirt. In order for the fold to lie better, the middle line of the rear panel is slightly retracted (red outline).
Measurements for building a drawing of a skirt: St = 38cm, Sat = 52cm, Di = 80cm.
Consider two options for the tapered skirts: the half sun and the sun. The main difference between such skirts extended to the bottom is that they have beautiful and soft folds that evenly fit around the skirt. This effect appears due to the cut of the fabric along the oblique line.
It is not necessary to use paper to create a pattern for such a skirt. The pattern of a sun skirt or a half-sun skirt can be built directly on the fabric. See Pattern of a half-sun skirt on the fabric.
First, draw a right angle with the apex at point O. From point O down the vertical, lay a segment OT equal to the half-girth of the waist multiplied by K (coefficient), which is 0.64 for the half-sun skirts, and 0 for the “sun” skirts , 32.
Skirt-sun: FROM = 38 x 0.32 = 12.2 cm.
Half-sun skirt: OT = 38 x 0.64 = 24.3cm.
From point T down the vertical, a segment TB is laid, equal to an average of 19.5 cm.
From the same point T, a segment equal to the length of the skirt is laid down, and point H.
For a "half-sun" skirt from point O with a radius of OT, draw an arc until it intersects the second side of a right angle at point T1, and with a radius equal to OH, draw a bottom line HH1.
The sun skirt is built on a straight line, in the middle of which point O is marked. Coefficient K = 0.32.
Putting aside the segment OT = 0.32 x St = 12.2 cm on a straight line, draw a semicircle TT1 from point O with this radius.
From point T, a segment of TH is laid, equal to the length of the skirt. From point O with a radius equal to OH, draw an arc HH1 - the bottom line.
Skirts cut along the side must be left hanging for several days in order for them to stretch and take a permanent shape.
After that, the length of the skirt is aligned on the figure. The bottom of the skirt is aligned from the floor along the ruler.
Construction of patterns and modeling of flared skirts (year)
St = 38cm, Sat = 52cm, Di = 80cm. Fri = 1cm, Pb = 2cm.
D = 80cm is laid from point T and point H.
From the same point T, a segment TB = 19.5 cm is laid, which determines the line of the hips. Horizontal lines are drawn through points B, H, T.
Now you need to calculate the width of the wedge along the waist and hips. Most often, these skirts have a tight fit around the waist and hips.
T1T2 = (St + Pb) / n = (38 + 1) / 2 = 19.5 cm (for a four-piece skirt), where n is the number of wedges in half, since the calculation is for half-girth of the hips.
T1T2 = (38 + 1) / 3 = 12.7cm (for a six-blade).
On the obtained segments, point T should be in the center.
The calculation of the width of the wedge along the line of the hips is carried out according to the formula: B1B2 = (Sat + PB) / n = (52 + 2) / 3 = 18cm, where BB1 = BB2.
The width of the wedge at the bottom is taken from the skirt model.
The side line is drawn with a smooth line.
The waistline is designed as follows.
The segments TT1 and TT2 are divided in half, and perpendiculars are drawn from these points to the extended sides of the wedge. The waist line is drawn with a smooth line slightly raised along the edges (0.5 - 0.7 cm).
The sides of the wedge are equalized using the segment TH, that is, its sides are equal to the length of this central segment.
To build a wedge of a year skirt, first find the level from which an additional expansion is made.
The sides of the wedge are again equalized after additional construction of the extended part of the year skirt. KN = K2H2 = K1H1.
The wedge of the year-skirt is drawn symmetrically with respect to the vertical TH line on all parts of the year-skirt.
The pleated skirt pattern has the following measurements: St = 38cm, Sat = 52cm, Di = 54cm, Pt = 1cm, Pb = 3cm. This pattern is suitable for a girl with sizes and heights of 164-96-104.
The number of folds can be any. This skirt model has 10 folds.
In order to determine the distance between the folds along the hip line, the following calculations must be made:
((Sat + PB) x 2) / n where n is the number of folds. ((52 + 3) x2) / 10 = 110/10 = 11cm.
The distance between the folds along the waist line is also determined in the same way:
((St + Fri) x 2) / n = 7.8cm.
The depth of the fold at the bottom should be at least 3cm (in this case, let's take 5cm). To prevent the folds from opening, on each side of the fold, you need to make a bevel of 1-2 cm from the hip line to the bottom line.
The longer the length of the skirt, the more the bevel, the more extended downwards this skirt will look.
If the construction of the skirt is carried out directly on the fabric, you can pre-process the bottom of the product. A skirt with a circular pleat often requires two lengths of fabric. In this case, the seam seams must be in the inner fold of the fold.
A right angle is built with the apex at point T. From point T, the level of the hips is laid down vertically: TB = 19.5 cm.
From point T, a segment of TH is laid down, which is equal to the length of the product: TH = Di = 54 cm.
To the right of points B and H, horizontals are drawn. Line TN - fold line or seam inside the fold.
From point B, lay the depth of the fold, which is 6cm (5cm + 1cm): BB1 = 6cm.
Next, lay the distance between the folds along the hip line: B1B2 = 11cm.
Find the middle of the fold:
B1B11 = B11B2 = B1B2 / 2 = 11/2 = 5.5cm.
The middle of the fold coincides with the lobar thread.
A vertical line is drawn through point B11. The intersection with the bottom line and the waist line is designated by the points H11 and T11.
From point T11 to the right and to the left, they lay off segments equal to: the distance between the folds divided by two. That is, 7.8 / 2 = 3.9cm.
From the point H11, segments equal: (B1B2 / 2) + 1 = 5.5 + 1 = 6.5 cm are laid.
The resulting points are connected with straight lines. Next, a segment equal to two fold depths is laid along the line of the hips, and the entire construction of the skirt pattern is repeated.
The ability to model allows you to sew several completely different skirts using one pattern. If you love to dance, then the patterns of gypsy and Spanish skirts will allow you to sew an outfit for performances yourself. And if you just follow the fashion, or prefer your own, purely individual style, then this section will help you always look fashionable and stylish. Moreover, using this skill, you can sew an exclusive dress. There are many styles of skirts: godet, flared, sun, pleated, pleated, Scottish, spiral, mini, midi, maxi, and skirt patterns will allow you to fulfill any design fantasies. Below are very interesting and practical options for skirts patterns: patterns for straight skirts, patterns for "Gode" skirts, patterns for "Sun" skirts, patterns for straight skirts with a detachable cape, patterns for wrap-around skirts, patterns for skirts with a chilli frill, patterns for undercut and draped skirts etc. which are easy to sew and pleasant to wear.
Taking measurements
In mass sewing production, ready-made tables are used to construct pattern drawings, in which measurements of the necessary parameters of typical figures are entered. For individual sewing, the use of such tables is impractical, since more accurate and detailed data are required: Here another system is used - calculation and measurement, which is based on measuring the distances between certain points of the human body. These distances are called measurements.
To take measurements, you must have a measuring tape, a pencil and a notebook for writing. In this case, it is necessary to comply with certain requirements: the person from whom the measurements are taken must stand relaxed, with a straight posture and arms lowered along the body; the legs should be brought together at the heels, and the socks should be slightly turned outward (at the slightest deviation to the sides, the measurements may turn out to be inaccurate); when measuring measurements, the measuring tape must not be tightened or, conversely, weakened; in order to eliminate the distortion of the readings, it is advisable to take measurements by linen.
Remember! The accuracy and accuracy of the pattern drawing and, therefore, the appearance of the product you sewn depends on the correctness and accuracy of your measurements.
However, this is not all.
to build a drawing of a skirt, you need to take into account what type of physique your figure belongs to. If you have a standardly folded figure (smoothly wavy back, the location of the protruding points of the shoulder blades and buttocks at the same level relative to the vertical, moderate notch of the waist and protrusion of the buttocks, normal thigh width), then the following measurements are required to build a drawing of the skirt
Straight two-seam skirt
Despite the variety of this or that skirt, the straight two-seam is the basis for the construction of many models. This skirt perfectly exists as a stand-alone product and as a part of many costumes. After all, it is not for nothing that she is one of the classic models and therefore for several decades has rightfully been at the height of fashion. It is suitable for women of any age category, and will also be appropriate both for special occasions and for everyday wear. This skirt can be sewn from almost any kind of fabric. However, it is not recommended to sew it from fabrics into a cage, since fitting such a pattern is a significant difficulty. If you decide to sew a skirt made of striped fabric, then when cutting it is necessary to observe the symmetry of the pattern on the front and back panels. A straight two-seam skirt without widening at the bottom will look a little narrower. Therefore, it is not recommended to wear it for women with low hips.
BUILDING A DRAWING OF A STRAIGHT TWO-SEAMED SKIRT
To construct a drawing (Figure 14), the following figure measurements are necessary: half waist circumference (St), floor at hip circumference (C6) and product length (Dsh) - And you also need to know the amount of increase for free fit along the waist line (Pt) and line hips (P6). For all sizes, they are equal:
Fri = 0.7-1.0 cm, PB = 1.5-2.0 cm.
In what follows, the necessary measurements and increments will be referred to as "initial data".
For the convenience of construction and calculations, we take the measurements of a typical figure; St = 38 cm, Ce = 52 cm, Dt = 75 cm.
We build a right angle with the apex at point T. The segment TH corresponds to the length of the skirt and is the middle of the front panel. The segment TB determines the position of the hip line and is equal to 13.5-19.5 cm. Through the obtained points B and H, draw lines perpendicular to the straight TN. From point B along the line of the hips, we postpone a segment equal to the measurement of the half-girth of the hips (C6) plus an increase in free fit along the hips (PB), and set point B1
BB 1 = C6 + PB = 52 + 2 = 54 cm.
Through point B 1 we draw a vertical line until it intersects with the waist line at point T1 and the bottom line at point H1. This line is the middle of the rear panel. From point B to the right along the line of the hips, we postpone BB2
BB 2 = BB1 / 2 - 1 = TT2 = HH2
Through point B 2 we draw a vertical line until it intersects with the waist line at point T2 and the bottom line at point H2.
I think you will be interested:
>
