Programs for Android - Browsers. Antiviruses. Communications. Office
  • home
  • Interface
  • Various options for making horses with your own hands, many ideas, as well as job descriptions. How to make a horse with your own hands from fabric and thread. Detailed master classes How to make a horse from thread

Various options for making horses with your own hands, many ideas, as well as job descriptions. How to make a horse with your own hands from fabric and thread. Detailed master classes How to make a horse from thread

) writes to




Important! Linen twine does not like knots very much. The choice of twine is not thin, less than 1 mm, and not thick, no more than 1.5 mm. It is inconvenient to use a thin and thick twine for making dolls. The twine should be of good quality, it is the most even. If knots occur, especially in critical places, it is better to fix them with a small drop of glue such as Moment Seconds.


1 To make a flexible horse, you need linen twine, two-core copper wire braided, red threads, a little thin skin, glue moment transparent, strip of fur (of your choice), black paint on fabric for eyes, strip of leather or braid for hooves, scissors, pliers.



2 Wrap linen twine on a book or cardboard to get windings: 30 full turns 32 cm long for the front legs, 30 turns 50 cm long for the head, body, 30 turns 50 cm long for the chest and hind legs, 15 turns, 15 turns long 46 cm for the tail.


3 Cut a wire 40 cm long at one end (hind legs), bend it. Separately, for the front legs, prepare a wire 32 cm long of one core (i.e., having cut one core beforehand and separating it, it remains in its entire braid plus in the outer half, cut). We define it so that the head, when tilted, almost touches the ground.
4 Fasten the wire for the front legs by tight rewinding around the main wire.



5 Take a 50 cm twine winding and start tying. First, just tie it with a red thread in the middle so that the knot is inside the dressing.
6 We place the uncut end of the wire in the tied winding and make the first tying already with the wire inside the twine. Tight. Node at the bottom. We pass through the knot a thin strip of leather chosen by you for the bridle.
7 After 3 cm, we make another tight tying with red threads, making sure that the wire always remains inside the twine.


8 We tie the entire winding around the wire. The front legs should be inside the winding. (I missed it and didn’t come back, it’s not important).



9 Made on top of the front legs.



10 Put the winding for the front legs 32 cm over the wire.



11 We wrap with twine not weakly.



12 Tighten the winding threads with a knot and it is better to secure with a drop of glue. You can trim it slightly if you suddenly get a difference in the length of the legs.



13 Take the 50 cm winding for the chest and hind legs and put it on the chest.



14 Wrap the back legs with twine. The threads should be divided equally on each leg.



15 Pay attention to the entire structure. You can lengthen the body, then the back can be wrapped with additional twine.



16 The winding of 15 turns for the tail is connected by passing it through the lower abdomen.



17 Firmly fix the tail with a separate thread.



18 At this stage, the legs can be slightly trimmed, especially if they become uneven.


19 Trim so that the horse is stable.



20 The body can be additionally wrapped in twine.



21 For the hooves, I took a braid, it is possible and better to take the skin. Cut strips along the leg with an overlap.



22 With transparent glue. Moment glue the hooves to the very bottom of the legs.



23 Align the legs again, shape the tail.



24 From thin leather we cut out an eight for the ears of about 4 cm. The middle is either glued, folded in half, or rewound with a thin thread.


25 Slightly glue the ears below the top winding.


26 A strip of fur of your choice (mane), glue just below the ears and up to the very back.



27 Checking the running horse.



28 We make a blanket out of leather or dense fabric, and a saddle out of thick leather.


29 The horse is ready.


30 Whoa!

DIY New Year's souvenir "Horse" made of threads

Master-class on making New Year's souvenir "Horse" from threads.

Masagutova Lilia Vasilievna, educator of MB DOI Kindergarten No. 6 "Cornflower" settlement Shushenskoye Krasnoyarsk Territory
New Year is coming soon, which means it's time to prepare gifts for family and friends. The symbol of 2014 is a horse, so the figurine of this animal will be an ideal gift for loved ones.
I bring to your attention a master class on making a New Year's souvenir "Horse" from threads. Making this souvenir does not require large material costs and does not take much time, and at the same time you can give your family a wonderful souvenir as a keepsake. Since the symbol of 2014 is a blue wooden horse (although some Eastern teachings speak of a green horse), then choosing color range for your craft, give preference to green or blue to attract prosperity and prosperity to your home. You can combine these colors with gold or yellow, because an animal like a horse is characterized by assertiveness, dynamism, fiery passion.
Smooth mane, silk fur
Have you guessed who is talking about?
Yes, then the horse is in a hurry to visit,
To surprise everyone around on the New Year,
To bring a cart of gifts, everyone, everyone,
To protect the Novy from problems!
The horse will be the best year, believe me
Meet him, well open the doors!
Purpose: A handmade horse will become an original, unique gift for children and adults, as well as decoration
for the New Year's home interior.
The master class is designed for older preschool children,
students, teachers and parents.
Necessary materials:


- semi-woolen or acrylic threads;
- threads "Iris metallic";
- scissors;
- frame for A4 photos;
- glue "Moment crystal";
- pieces of leather, fabric, felt;
- decorative eyes;
- beads, braid for decoration;
- copper wire.
Step by step description work:
1. Let's start by making blanks for the future horse.
To do this, we wind the threads on the photo frame.
(the number of turns depends on the thickness of the threads, I have about 80).


2. Next, cut the wound threads on one side.


Here is such a blank made of thread segments.
3. Fold the thread blank exactly in half and tie it with thread
the same color.


4. Form the horse's face. For this, a piece of thread
departing from the bending line of the workpiece, one centimeter,
we make several turns and tie on a knot.


5. We make one more constriction just below the first, form the horse's head.


6. Insert the wire bent in half into the threads.


We distribute the threads around the wire.


7. With the second bundle of threads we wrap the "chest" of the horse and tie it up.


8. Insert the wire into the middle and make another constriction,
creating the body of a horse.


9. Begin to shape the hind legs. To do this, we divide the bundle of threads
into two equal parts. We distribute the threads around the wires and do
three constrictions. After that, you can trim off excess threads and wire.


10. Form the front legs and make constrictions in two places.
11. From threads "Iris metallic" we make a mane and a tail.
We fix the mane with glue.



12. Fasten the tail with a thread to match the horse's body.


13. From pieces of leather or beautiful fabric cut out and glue the saddle.
We decorate the saddle with braid or beads.


14. Cut and glue the ears from a piece of felt or fleece.


15. Glue the eyes


A horse made of threads is ready!


New year greetings 2014

Beating off the hoofs imposingly,
The year of the horse is approaching us important,
And if we show skill with you,
And we will be in our own way in this year,
That with a horse is exactly the same for all of us,
Just know, guide by pulling the bridle.
We will reach, we will rush to the best with you,
In the year of the horse, we manage everything ourselves!

May happiness come in the Year of the Horse!
It will warm you with warmth, dispel your sorrows,
Beckon with a dream, add good luck,
It will bring fun and joy with you!
I wish you health - let it only grow stronger,
And let your prosperity grow, do not diminish.
May life please with beauty and luck,
Have a good New Year mood!

I wish you from the bottom of my heart
On New Year's Eve, great luck,
Let it be very sweet to live
In that New Year Horses!
Abundant cash rains
And loyal, sincere friends,
Good luck bright carnival,
So that you are surrounded everywhere!
Compliments were often heard
Happy, joyful moments
You would have more
And every day and every hour!

A horse can be made from paper and she can decorate christmas tree, you can sew from ordinary socks, but we suggest that you make a horse from ordinary threads.

Such a Horse will become a favorite toy, mascot or gift.

To make such a horse, you need:

Light brown yarn;

Yarn dark brown(for mane, tail and peephole);

Red fabric for saddle and decoration rhinestones, beads.

Horse toy making

1. First, twist 88 turns of thread around the 11.5 cm piece of cardboard.

2. Remove the threads from the cardboard. Bandage in one place.

3. Cut the skein of thread from the opposite side.

4. Fold the skein in half, tie it close to the place of the previous sling.

5. Tie the bundle again, forming the horse's head.

6. Insert the wire bent in half into the threads.

7.Use a bandage to shape the horse's neck.

8. Shape the horse's legs.

9. Cut off excess wire and thread.

10. Make another bundle of yarn of the same size (see point 1).

11. Wrap it around the “chest” of the horse and tie it up.

12. Insert a wire bent in half into the bundle.

13. Make another dressing, creating the horse's body.

14. Make legs by tying bundles of thread around the wires. Straighten the ends of the threads.

15. From bunches of brown threads we make the mane and tail of our horse.

16. Lift the ponytail on both sides, wind beige threads under it; secure them.

17. Make a saddle out of red fabric. Use a needle to make a fringe along the edge of the saddle. Measure the length of the jewelry you want. Can be decorated with rhinestones, beads or other decorations.

18. Sew the decorations onto the saddle making the desired curve. Glue the saddle onto the horse. Make the eyes with two knots of thick brown thread.

Thanks for the master class to Shkvyre Zhanna

Horses (horses, horses) do it yourself

Age: 7 years

Head Mityaeva Elena Vitalievna, MAOU DOD "GDTDiM No. 1, Naberezhnye Chelny

Dear guys and dear teachers, it is a well-known fact that things made by us with love and good mood, are of great benefit, a lot of joy. We invite you to plunge with us into the world of fantasy ...

We will teach you guys how to make cool horses,

That the new year would be a joy for all people.

Our lovely horses will save your friendly home,

And luck will not run away, it will help in everything

For this we need:

1. Threads for knitting, color at will, or twine;

2. Wire that bends well;

3. Pliers;

4. Scissors;

5. Glue "Titan";

6. Decorations (rhinestones, ribbons, etc.) are optional.

Step-by-step process for making a horse

1. First, we take the wire, make the frame of our horses... To work with the wire, you must use pliers or another tool designed for this type of work.

3. We wind until we get the silhouette of a horse, and give it a shape

4. We begin to decorate the horse, in our case we take white yarn and make a tail and a mane, you can use any other material - rain, any other New Year's tinsel, etc.

In order to make a mane, it is necessary to cut 15-20 pieces of thread 3-4 cm in size and tie them in the middle to a piece of thread 5-6 cm in size. Gently glue the resulting mane to the horse's neck. We do the same with the tail, only the size of the threads will be 7-8 cm and they are connected in one place, and then they are glued. The glue needs to be done carefully so that no traces remain.

The master class was conducted by O. V. Yurkovskaya.



Tools and materials:
thread linen twine;
colored threads;
thick cardboard;
scissors;
Crochet hook.

How to make a horse out of thread.

We make a blank out of cardboard or other improvised material - a rectangle measuring 17x25 cm.On the side 25 cm long, we wind 30 turns with twine, which will later serve as the body for the horse.

We remove the thread circle from the workpiece and make three turns with the free end of the thread - this will be the face of the horse. We fold a circle of threads into one bundle and make three turns - this will be the head. We make two turns even lower and fix it with a loop. This is how the neck of our steppe horse was formed.

1


2


3

4


To make fluffy bangs, we wind 15 turns of thread around our fingers. We put the circle that has formed on the horse's neck and fix it with turns from colored threads. A lush bunch has formed. We perform three more such beams in the same way. Using a crochet hook, we hide the extra ends of the colored threads.

5


6


7


We return to our workpiece, but already on the side with a length of 17 cm. We wind 30 turns of thread. We fold the circle into a bundle, leaving 1.5 m of thread at both edges. Moving from the edges of the bundle to the center, we first make three turns and tighten the loop - these will be the hooves, and then, every 1.5 cm, tighten a new loop.

Thus, the front legs of the horse were formed. Take your time to trim excess threads. Pressing the legs tightly to the mane, we fix them, wrapping them crosswise with thread. We wrap the rest of the thread around the horse's body, which is about 3-3.5 cm, and fasten it with a loop.

8


9


10


11



Top related articles