How to make a paper tank with your own hands. Workshop on making a train out of paper How to make a tank out of cardboard

21.05.2021 Cameras

2. You should have an X-shaped fold at each end of the rectangle. Now shape each corner to form a multi-layered triangle. To do this, you need to fold each of the two inner corners to the center of the letter X, put the corners together and give them a little.

3. Repeat the same steps for the second end of the rectangle. This should be done from the "seamy" side so that as a result a double-sided arrow with sharp ends is formed, but these ends should be located in opposite planes to each other.

4. Bend the corners of the upper part of the "arrow" so that a diamond is formed on one edge, which is folded from two corners.

5. Bend one of the corners on the opposite side so that it connects with the bottom, and bend its edge up. You will form a valve, which should be bent in the opposite direction. Repeat the same action with another corner. On this side, you will also have a rhombus as a result.

6. Place the product with its wide side facing you, lift its side parts and insert one part into the other. An arc is formed with paper flaps attached to the top. The formed arc is your paper tank, at the top of which there is a real "tower".

7. The tank is almost ready. It remains only to add tracks and a muzzle (cannon) to it. The missing parts are easy enough to make: fold the side edges of the tank and form tracks from them. For a paper barrel, roll up a tube and insert it into the hole in the "tower" of the tank.

Now the paper tank is done!

Also watch the video on how you can make other tanks out of paper!

If you use the knowledge on creating paper tanks from this article, then you will definitely succeed. Successful creation of paper tanks!

All the boys love to tinker with toy military equipment - to come up with plans of operations, send soldiers on reconnaissance, take tanks to combat positions. Basically, these are purchased toys, beautiful, expensive, but often breakable in children's hands. And if your son started a big battle, and the equipment was not counted, together with the child, make a tank out of paper.

How to make a volumetric tank out of paper

Such a model is not costly in terms of materials and is easy to manufacture. For work you will need: PVA glue, scissors, colored paper, pencil, ruler.

Making caterpillars

Take a colored sheet of paper. Cut out two strips from it, measuring 3 by 22 cm. Fold the shapes in rings and glue their ends overlapping.

We build the building

On a sheet of green paper, draw a rectangle 8x14 cm. In height, step back 5 mm on both sides and draw the rays from top to bottom. Measure from them to the middle of the sheet 3 centimeters, draw lines. Run through the pencil sketches for the bends and get the future tank hull.

We make a tower

Cut out the green shape - 8x10 cm. Set aside 5 mm from the edges, then two centimeters. Draw lines as in the case of the body. Bend the bends with your hand. Prepare another rectangle for the muzzle - 6 by 10 cm. Fold it in half lengthwise twice, knead the workpiece with your fingers, giving it a triangular shape.

Assembling the toy

Glue the muzzle to the tower, making three notches of 0.5 mm on one side of it. Coat the turret joints and attach to the hull. Hold for a couple of minutes to grab. Place the tracks on the tank.

Tip: for structural reliability, you can make tracks from thick paper or thin cardboard.

Build a five-pointed star out of red paper, stick it on the craft, and the toy paper tank is ready.

How to make an origami paper tank

In this case, you will need: A4 paper, scissors.

First step

Take a piece of paper and fold it in two. Fold the top corners of the resulting shape inward with triangles, then fold back. Fold the pyramid along the outline of the folds.
Also make strips from the bottom side. Fold the outer tabs up and turn them to the right.
Fold the left edge of the strip inward, then turn it halfway outward, on the right side - the same. As a result of the manipulations, you will get a piece of paper, bordered at the ends with pyramid arrows.

Step two

Straighten the upper figure, then fold in the opposite direction, and fold the lower one towards the middle so that both figures touch.
Insert the pyramids into each other. Place the ears of the upper pyramid inside the workpiece. The result is a tank turret.

Step three

Straighten the inside of the strip - you get caterpillars, then straighten the tank on all sides, giving it volume. For the muzzle, cut a piece of paper - 4x4 cm, roll it up with a tube and insert toys under the tower.

The craft is simple and quick, and by connecting the whole family to this event, you can assemble several tanks and arrange a real tank battle.

How to make a tank out of corrugated cardboard

For work you need: corrugated cardboard, scissors, glue.

Cut strips from cardboard of blue color, measuring 1 by 25 cm. Twist the wheels out of them.
Prepare a piece of green cardboard, 3 cm wide, 30 cm long. Cover it with glue and wrap 4 wheels of each track.
Cut a rectangle out of the cardboard - the platform for the tank. Glue the tracks on it, stepping back 1 cm from the edges.Prepare two strips 1.5 cm wide from blue cardboard, fold each in half and glue to the body of the tank. Here, in the middle, fasten the tower, folded like a wheel, and at the back - tanks for fuel.
Make a tank cannon by rolling a piece of cardboard into a tube, then attach it to the tower.

Whichever way you make the tank, the result will please - you will get an original toy, have a pleasant time with your child, learn to create interesting things from ordinary paper with him.

"Dedicated to folk crazy people"

If your desires in building a layout railroad surpass the capabilities of mass production, it's time to think about how to make your own models. Exists different materials and technology, - here the manufacture of cardboard is considered.

First of all, you should stock up on everything you need.

First you need a good white cardboard (preferably 0.35 - 0.5 mm - determined by eye with a ruler).

You also need the right tools:

mechanical pencil with a 0.5 mm shaft,
PVA glue,
ruler 30 cm,
corner,
washing eraser,
threads (preferably not very fluffy),
transparent plastic, double-sided tape,
emery of two types (large and small),
paper knife, ordinary scissors,
manicure scissors,
clothespins (preferably plastic with flat surfaces),
and also something else on the little things, which will be indicated below.

And most importantly, you need a sincere desire to make a layout!

Here we will consider the production of a model on an already finished chassis. Carriages from TT-model or VTTV can be used as a donor.

When producing any layout, you need reference materials in the form of drawings and illustrations of the modeling object. To save time, I also used the CMV from the TT model.

So, let's begin. If a drawing is used, then all dimensions must be recalculated in the appropriate scale, in my case - 1: 120. Next, on a sheet of cardboard, draw a basic unfolded carriage WITHOUT a roof (the result should be an elongated parallelepiped without a floor) (Fig. 1).

On it we draw everything that should be on the walls of the carriage, that is, windows, doors, lines where stiffeners should be, etc. After everything is drawn, we cut through all the windows with a knife.

Now it is necessary to increase the rigidity of the future body - with back side it is necessary to stick on the walls the second layer of cardboard with already cut windows so that the windows coincide with each other (Fig. 2).

Since the cardboard when wet has a bad property to swell, it is not necessary to smear a lot of glue, but it is necessary to quickly and with a thin layer spread on one side and immediately press firmly and put it under the press.

Now let's move on to the stiffeners. They are made from threads that are glued along the drawn lines: first, a glue strip is applied, on which the thread is then applied and pressed with a finger. The bottom line is to saturate the thread with glue and remove excess glue from the surface. With all the ribs glued on, it's time to outline the doors. To do this, cut a thin groove along the door contour with a knife. After that we coat the cut out contours of the doors and the already glued threads. When everything is dry, you need to gently walk over the surface of the threads with fine emery and once again grease with glue. For all coatings, we try to leave as little glue as possible, so that later unnecessary irregularities do not come out. The handrails are made from thin strips of cardboard.

Now it's time to start assembling. We press the folds on the back with scissors. Then we cut out, carefully bend and glue (Fig. 3).

Carefully sand the roughly protruding cardboard at the gluing points.

Roof To get a roof of the desired shape, you first need to create a box of layered cardboard, the height of which is equal to the height of the roof itself (usually painted gray). The width and length should be 1 and 2 mm higher than the width and length of the car blank, respectively (these are approximate figures). This is necessary so that after gluing the roof (by the way, it is also advisable to glue it with a press), it can be sanded from the sides and thereby adjusted to the size of the car. Next, the roof needs to be given a convex shape - for this, we draw a roof profile from the ends and cut off the excess lengthwise. After that, we grind first with a large emery, and then with a small one. After that, coat the roof with glue and wait until it dries. We process it with fine emery and repeat the operation. Now you can glue the roof. If you find something to press it while it dries, it will be good. If in the original there are stiffeners on the roof, then they are made in the same way using threads. We coat the joint of the roof with the body with glue. The air intakes can then be attached to the roof. We glue cardboard from the ends of the car to hide the joint, although, depending on the situation, you can do without it. Transitional soufflés are made using toothpicks (Fig. 4).

Let's talk a little about the insides. First you need to make a floor of 2-3 layers of cardboard. Next, we mark the layout of the partitions on it, which, after cutting, "put" on the glue. The total height of the internals with the floor must be matched to the height of the undercarriage. We glue the upper shelves to the walls, and the lower ones will most likely have to be glued to the floor. After that, a strip of cardboard 1 cm wide and 2 cm long less than the length of the carriage is glued on top of the partitions.

Now you can paint. It is advisable to use water-indelible paints. Spray paints, regular oil paints, or special model paints can be used. Then we use scotch tape and brushes of different sizes to get the desired color.

When everything is dry, we glue strips of transparent plastic on the inside of the walls of the car using double-sided tape. From the inside, we glue double-sided tape on the roof, and then press the insides of the car to it. From below on the floor of the car we again glue double-sided tape and press the chassis against it (Fig. 5).

The car is ready!

Watch also the video on how to make a freight car from cardboard:

How to make a paper cup

Making an origami paper cup, large or small, shouldn't be too difficult, even if you're a beginner. Even children can do this successfully. preschool age... All you need to fold the glass with your own hands is an ordinary sheet of paper or a piece of newspaper, and good mood and, of course, an instruction. It is worth noting that the paper cup may well be the first and, without a doubt, a pleasant way to get acquainted with the origami technique. It can be assembled in just a few minutes and it won't be easy. But, as soon as you successfully cope with such a paper figure, study the diagram of its assembly, as other origami-style crafts will also be within your reach.

What is needed to create an origami cup?

You will need a paper sheet of A4 size, which should be cut off from one side in such a way that you end up with an equilateral square. It would be a good idea to involve your friends and acquaintances in such a creative, exciting process, because folding an origami cup together will become much more interesting. It will take about five to seven minutes to create it, but in the end you will get comfortable and very original dishes for the whole company. You can, as an option, color origami glasses or sign them with the names of all guests, then your holiday or picnic will become even more fun and funny.

Some people have a much better visual perception of the process of making paper crafts. Others, on the contrary, need to read everything about how to create cups from paper sheets... So, a square piece of paper or newspaper is folded diagonally. You need to make a triangle. Its right and left corners are wrapped towards the center. It is important to ensure that all paper folds are not only even, but also neat. As a result, after the above manipulations, a pentagon is obtained. All that remains for you is to bend and then fold down its upper corners. Next, you straighten the glass and you can enjoy your favorite drink poured into it. It is recommended to use a standard-sized sheet of paper taken from an A4 album. However, when you need a large glass, such as a container for popcorn or berries, you can always just take a sheet bigger size to make a larger glass out of it. Both the diagram and the steps remain the same.

There are several variations of the use of a glass, which is made using the origami technique. First, you can add thread to the side of the paper product. This is done with a needle. A button is placed on the thread. Thus, the game is known as "sniper". It is analogous to the French game called "bilboque". They have one goal - to throw a button into a glass.

In Japan, with this kind of game, everything is much more serious. Its participants, just like in karate, are assigned titles, that is, "given". This kind of "sport" is called "Kendama" there.

If, at the end of folding the paper cup, the triangle is not wrapped outward, but vice versa - inward, then in this way a semblance of a puppet theater for fingers is obtained. Just paint the faces of different animals or cartoon characters on them, and then glue the ears or some other attributes. Alternatively, you can make your own zoo or aquarium based on such cups, cheerfully decorated with fish and other representatives of the animal world.

The hole punch will decorate the creation

If you make holes in an ordinary glass with a hole punch, and cut the triangle in a semicircle, then a very cute product will come out, and the shape of the semicircle, together with the uniformity of the holes, will completely transform it. Such paper cups with chickens' muzzles painted on them are very relevant before Easter. Painted Easter eggs are placed in them.

Boys are very fond of various equipment: cars, airplanes and, of course, tanks. If your future defender of the fatherland is growing up, then a tank made with your own hands will be an excellent gift that will definitely delight your kid. This article will show you how to make a paper tank with your own hands. You should start with the simplest model.

How to make a paper tank: the simplest technique

Take a regular A4 sheet and cut a strip 4–5 cm wide from the short side.

We take a strip and bend the top corner from left to right so that we get a triangle.

We unfold the corner on the strip to its original position. We bend the top of the strip to the other side, also in the form of a triangle. And again we return the paper to its original position, after which we get clear fold lines.

Along the fold lines, fold a triangle at the top of the strip as indicated by the instructions. Do the same at the bottom of the strip. Press down firmly on the top and bottom of the pyramids to secure their position.

Now you need to bend the ears of the pyramids to the left, to do this, lift them up, and then bend them in the desired direction. Then fold the right edge of the strip inward towards the center.

Fold the lugs of the upper pyramid inward and fold the strip so that the upper corner is parallel to the lower pyramid. Then insert one pyramid into the other.

This is the shape you should get.

We bend the ears, open the upper pyramid, and then fill them inward.

Thus, we got a turret for a tank.

Take your figurine and turn its side towards you. Straighten the strip, which is concave inward, this is necessary to give the future caterpillars volume. Do this carefully and from all sides.

The only thing left to do is to build a muzzle for the cannon. To do this, take a 4x4 piece of paper. Roll it into a tube with a thickened end. After that, slightly raise the turret of the tank and insert the muzzle there.

That's all, the origami paper tank is ready. Such a craft can be made from any paper, but it will look best if you take a blank white sheet, and after you form a combat vehicle, decorate it. Or make a toy straight from colored paper.

Modular tank T-34

Before you start making such a tank, you need to figure out in detail how to make the origami modules themselves.

To create such details, you will need a regular A4 album sheet. But if you make these parts for the tank, then it is better to immediately take colored paper suitable color.

Fold the sheet in half, then again and again, in the end you should get paper with 16 squares, but if you fold the sheet again, you get 32 parts. Cut the sheet along the fold lines.

Take one of the resulting triangles and fold in half diagonally.

Fold the resulting strip in half again, and then unfold the part to its original position.

Now fold one edge towards the center and then the other, as you would when folding an airplane.

Flip the piece over and fold the remaining free corners into triangles.

The resulting segments need to be bent upward.

Fold the part in half and the origami module is ready.

Now you can start creating the tank.

Tools and materials

White or green paper.
Ruler and pencil.
Scissors.
PVA glue and a thin brush for it.
A can of green paint.

For such a tank, you will need 5088 modules, you can make them in advance or do it in the process. We start the assembly from the main part - the body.

Insert the corner of one module into the pocket of the other.

Take the third module and insert it into the pocket of the second.

We take the fourth module and insert the free corner of the third into it.

Insert the corner of the fifth into the fourth.

At the moment, the long side of the case is being assembled. Fold until you have 13 pieces in total.

Now you need to fix the structure, for this, take another module and insert the corners of the first modules of both rows into it. It is marked in green in the photo.

Add 7 more modules in the same way, this will be the third row.

1st row - 30 modules

2nd row - 29 modules

3rd row - 30 modules

That's it, three rows are ready. Do not insert the modules too tightly, otherwise the part will not move.

4th row - 29 modules

Odd rows - 30 parts, and even - 29. You need to collect only 100 rows.

Now you need to carefully connect 1 row and 100, this will be the body of the tank.

Tank side

1 row - 6 modules, and 2 row, respectively, 5 parts.

Alternate the modules as above, even and odd. We make 60 rows.

The board must be glued to the body, make the same board for the second side.

Tank cabin

Do not forget what the short and long sides of the modules look like, you will need this later.

We begin to make 1 row, it will consist of parts with a long side, and the second row with a short side.

In order for your structure not to fall apart, you need to secure it with the third row, a piece with a short side.

When the workpiece is ready, it must be connected into a ring. The corner of the part of the first row is inserted into the module of the second row; in the photo, the junction is marked with green parts.

Do the 6th and 7th rows in the same way as the previous two.

Also continue doing rows 8, 9 and 10.

Turn the workpiece over, the cab is almost ready.

Cab cover

We collect in rows, with the long side. 1st row - 12 modules, 2nd row the same.

Connect in a ring, insert the corner of the first row module into the pocket of the second row module.

In the third row, we need to increase the number of modules to 14. Put on 4 modules, each on one corner, shown in green in the photo.

This is the circle you should get.

Increase the 4th row to 16 parts, in the same way as they did in the third row.

In the 5th row, you need to get 20 parts, for this we put on 8 modules.

6th row - 24 modules, again we put on 8 parts.

7th row - 28 parts, 8 parts.

That's it, the cockpit cover is ready.

Continuation of the master class, watch the video:

And below there is a video that will show examples of how to make a Tiger tank out of paper, and more.

A simple paper option.

KV-1 model:

Tatiana Gurova

Wheels knock, knock

Our the train rushes into the distance,

And the smoke from the steam locomotive

Whitish veil.

He closed the floor of the sky from us

And the steam locomotive "Tu-tu, -

Buzzing, - "I'm before lunch

I'll bring the kids.

I'll come to the station

On time, on time,

Then I'll go to the depot,

And I'll sleep there for an hour "

I. Shevchuk

We take the sheet paper A4 format and fold in half

Then, unfold the sheet and bend both sides to the middle.

We form a rectangle and cut out from the strip paper windows, glue

Then we cut out the circles and glue them as well.

That's it, one trailer is ready. Other trailers are made according to this principle.

When we did a train, the guys themselves cut out the windows from the strip paper, and the wheels are made of squares.

Related publications:

The path runs through the meadow, Dives to the left, to the right. Everywhere you look, flowers around, Yes knee-deep grass. Green meadow, like a wonderful garden, Smelly and.

Flannelgraph making. Master Class. Lushnikova M.V. - educator. I have long wanted to have a flannelegraph in my group, but get plywood.

It was late autumn. The ground was covered with an autumn carpet. This inspired me to create an autumn gramophone and write a poem Poem.

PURPOSE: development of creative musical abilities in children. OBJECTIVES: - to give an initial idea of the wide possibilities of noise.

For work you will need: scissors, colored crepe paper, a brush for glue, glue, black cardboard, cardboard for a template, a board, a stick for.