Organza elastic bands. DIY organza bow: a master class for making exquisite jewelry. To make chrysanthemums, we need

Every mother dreams of making fluffy bows for her princess, but not everyone knows how to sew them. This article will certainly help you, read it to the end, and you will learn how to make chic bows with your own hands. One of the best and most suitable materials for making bows is organza..

This fabric is very lightweight, bows of any shape are obtained from it. And do not even worry that after washing the bow will not be the same in shape, nothing will happen to it.

You can also tie a large bow out of tulle; beautiful large bows can also be made from a narrow ribbon if you assemble them correctly.

Consider several options for making lush bows: the instructions for making are below in the article, in the gallery - photo examples finished works, and the training video can be easily found on the Internet.

To make such a bow, you will need:

• Cardboard.
• Organza ribbon (five centimeters wide).
• Clamp.
• Glue gun.
• Needle.
• Scissors.
• Thread.
• Scrunchy.
• Candle.
• Satin ribbon in the same color as organza.

Manufacturing stages.

1. Cut the tape into 18 pieces. Each piece should be 15 centimeters long.
2. Making kanzashi petals: fold each piece in half. Make a fold in the middle. Secure the petal with a candle. Make the rest of the kanzashi petals in the same way.
3. Make a base. Cut a circle out of the cardboard. Its diameter should be 2.5 centimeters. Wrap it up satin ribbon and glue the gum with a glue gun.
4. Now collect the bow. First, glue the six petals with a slight overlap. This will be the first row. The second row will already consist of five petals. Subsequent rows will be one petal less.
5. The bow for the princess is ready!

Gallery: organza bows (25 photos)

Bulky bow made of a solid tape (master class)

How to make a voluminous bow? It's very simple! To make such a bow, you will need:

Manufacturing steps.

1. Singe both ends of the ribbon with a candle or lighter.
2. Fold the ribbon in half. From the fold line, make a simple seam. This will fold.
3. Pull the thread. The ribbon will begin to gather. Pull the thread as tight as possible, then cut off the excess thread and secure it.
4. Roll the ribbon into a roll. Each layer must be fixed with a glue gun. It should turn out to be a flower.
5. Make the base. Cut a circle out of the cardboard. Its diameter should be such that it covers the glued center. Place the circle on heavy fabric, trace around it, and then cut it out.
6. Glue the bow to the base.
7. Use a glue gun to glue the hair tie.
8. Fluff up the bow.
9. DIY bow is ready!

Flower bow (master class)

This version of the bow is incredibly beautiful.... You can safely wear it on September 1st. It differs from other options for bows in that chiffon is used for its manufacture.

To make such a bow you need:

• White chiffon.
• Beads or seed beads.
• White organza ribbon.
• Pin.
• Thread and needle.
• Glue gun.
• Scissors.
• Cardboard.
• Pencil.

Manufacturing steps.

1. Draw a circle on the cardboard. Its diameter should be six centimeters. Place a circle on the organza fabric, trace and cut out.
2. Make petals. Fold the fabric circle in half, sew along the edge, then pull off. Put four more folded circles on the same thread. Get organza petals. This is the first row.
3. The second row will be of five chiffon petals. Make them the same way.
4. Make another flower with seven organza petals and nine chiffon petals.
5. Connect the flowers with a glue gun: chiffon petals - organza petals, and so on.
6. Make a base. Cut a circle out of the thick fabric. Its diameter should be such that it hides the middle. Glue the same chiffon circle onto it.
7. The middle of the bow can be decorated with beads or beads.
8. The bow is ready!

Organza bow hair clip (master class)

To make hairpins you will need:

Manufacturing steps.

1. Measure and cut four tulle squares. The size of the square should be eight centimeters.
2. Now you need to cut four pieces of organza. The first four segments should be seven by fourteen centimeters. The four second segments are seven centimeters.
3. Make kanzashi petals. Fold the fabric (seven by fourteen) in half. It will turn out to be a square. Fold it diagonally again, fold the edges towards the center. Clamp the bottom with tweezers.
4. Wrap the resulting diamond in reverse side... Cut the bottom evenly and burn it with a candle or lighter. You should get a petal. Make four of these petals.
5. Now make an organza and tulle petal. Slide the organza square over the tulle square.
6. Fold them in half to make a triangle.
7. Bend the corners to the center, pinch the bottom with tweezers and burn with a candle. Another petal is also ready. They also need to be made four pieces.
8. Two circles must be cut out of the red ribbon. Their diameter should be such as to cover the ear.
9. Burn the edges of each circle.
10. Glue the flower from the petals with a glue gun.
11. Glue the resulting flower on the circle.
12. Glue a metal hair clip to the circle.
13. You can glue a bead in the middle of the bow.
14. Lush bows-hairpins are ready! If desired, you can make several pairs of such hairpins.

Now you know how you can make an organza and chiffon bow with your own hands. Choose any option and get to work. Success in creative work!

Any girl and girl believes that there is never too much jewelry. And, of course, everyone wants variety. There are a lot of materials for making accessories. Organza is a translucent, rigid fabric. It can be composed of silk, organza or polyester. Its lightness and flexibility depend on the composition. There are two types of organza: matte and shiny. Various patterns and embroidery are applied to the fabric using laser, printing or embroidery. A DIY organza bow master class will help you make very original jewelry for everyday wear or for a holiday.

Bow "Fluffy"

One of original jewelry can become a round bow "Fluffy". It is made very simply and quickly. Even a schoolgirl under the supervision of parents can cope with the implementation.

Materials and tools:

• organza with 8 cm tape. One bow 180 cm of ribbon;
• a piece of organza-colored felt;
• scissors;
• needle with thread;
• elastic;
• candles or lighter;
• glue gun or "Moment".

Step-by-step execution of a bow. We take a piece of tape 1.8 meters and use fire to process the ends of the tape.

We fold the tape in half in width. With a "forward needle" seam, we begin to sew the tape along the length.

Pay special attention to this point! The stitches should be fine, even and neat.

As the stitches are formed, we tighten, as shown in the photo.

You should get such a blank.

We twist the tape into a tight roll. We fix each turn with glue along the basting line.

We fix the end. Cut out a circle out of felt. It should be equal to the diameter of the seamy side of the fluff. Sew on the elastic.

Turn the blank over with the right side and open the double tape, fluffing up the fluffy. The bow is ready!

Poppy and rose

Poppy flowers never go out of style. They always attract the attention of others. And this is not surprising. The Egyptians, for example, saw the poppy as a symbol of femininity, youth, and charm. Also this beautiful flower is a symbol of many cultures and beliefs. Making an organza poppy is perhaps one of the easiest bows to sew.

Required inventory:

• organza red;
• circle pattern;
• scissors;
• pencil;
• candle;
• needle with thread;
• black bead and beads.

Let's start a master class.

Attaching a circle to the organza cut, cut it out. You can do this either individually or fold the fabric to fit the template and cut out several blanks at once.

Carefully scorch the edges of the petals with a candle.

We stack the circles on top of each other. Sew a large black bead in the center, at the beginning with one stitch. We straighten the petals in a circle, as shown in the photo.

We continue to fix the middle and decorate it with black beads around its circumference. Next, you need to attach a hair clip, elastic band or glue it to the hoop.

The organza poppy is ready. This sewing method can be applied to other colors as well. It is enough to change the color of the material and replace the middle.

In a similar way, you can sew a rose from organza. The only difference is that the template circles should be of different diameters - from larger to smaller. Each petal should be cuts (5 pcs.), And then process the edges with fire. More details can be seen in the photo below.

To create a more voluminous and vibrant flower, you can use a satin petal as a base. You should work with it in the same way as with organza.

Kanzashi technique

Per last years the kanzashi technique has become very popular. Organza is also suitable for making kanzashiks like atlas and reps. Let's look at an example.

We need:

• organza;
• a needle with a thread to match the fabric;
• scissors;
• circle pattern in two sizes 11 cm and 14 cm;
• elastic;
• candle;
• bead for center decoration.

The progress of making organza bows using the kanzashi technique can be seen below.

Cut out 5 circles with a diameter of 11 cm and 14 cm from organza. Fold them in half. The wrong side must be inside. Sew the needle forward seam, stepping back 0.5 cm from the edge. We process the edges with a candle.

We tighten the thread. Tie and cut tightly. Repeat for all ten circles.

We string all five petals on a string big size and sew them into a circle, as shown in the photo.

Repeat for small petals. It turns out two identical flowers of different sizes.

Sew flowers from the seamy side.

Sew the middle in the center of the workpiece. It remains to sew an elastic band.

Hello dear viewers! In this workshop, you will learn how to make an elastic band from ribbons. The elastic on the bun will be decorated with roses. I make them from an organza tape 4 centimeters wide.

Bend the edge of the tape towards us at an angle of 45 degrees and fix its position with stitches. Next, we fold the free edge of the tape towards ourselves and lay the stitches along the lower border of the formed triangle. Thus, we get one rose petal.

Now we bend the tape away from ourselves and again fix its position using a thread with a needle. This is how we got another rose petal. Then we repeat our movements, alternately bending the tape towards ourselves and away from ourselves.

When 16 petals are made, cut off the free edge of the tape and burn it with a lighter.

Gather the petals a little and smooth them out to get even folds.

We fix the thread and start forming the rose.

On the edge of the tape where we laid the stitches, we apply glue and twist our petals.

As a result, we will get such a lush organza rose. For the elastic band, I needed 5 of these roses. You may need more or less depending on the size of the bundle. The length of the elastic can also vary. I identified it by eye, trying on an elastic band on a bun.

We glue the edges of the elastic with silicone glue or sew them together. We take a felt circle with a diameter of 4 centimeters and make two cuts on it, the distance between which should be several millimeters larger than the width of the elastic. Using a felt strip, hold the elastic on a round base.

When gluing the ends of the strip, be careful that the elastic does not stick to the base. She must move freely.

We glue the rose to the felt base.

In this way, we place all 5 roses on the elastic band.

Now we will make a bow from a five-centimeter satin ribbon and a four-centimeter organza ribbon. The length of the segments should be 20 centimeters. First, we process the cut edges of the segments so that they do not fray during work.

We connect the satin ribbons separately. Mark the middle of the segments and bend the free edges to it. We fix the position of the edges with stitches.

On the same thread we string the second tape folded in the same way.

We tighten the thread and wrap the resulting bow with it. We fasten and cut the thread.

We fold and connect the organza segments in the same way as the satin segments.

Glue an organza bow on the satin bow. Thin tape we wrap the middle of the bows.

We glue the resulting bow to the elastic, covering the junction of its edges with it.

The elastic on the bun is ready. If you liked my master class, mark the thumb up, leave comments and subscribe to my video channel. Thanks for watching and see you soon!

Despite the fact that school time has already begun, I want to offer you an interesting master class on making a lush bow for school... Also, this bow is suitable for September 1st. Let's get down to making this wonderful bow, and Julia Pereyaslova will tell us how to make it.

To make a bow you will need:
* Ruler.
* Scissors.
* Lighter or candle.
* Satin ribbon 2.5 cm.
* Thermal gun.

Method for making a fur bow:
We take satin ribbon 2.5 cm. the desired color and cut off segments of 11 cm. Each will need segments in different ways, who will do how, about 60 pieces.
We take the segments in turn, we make petals from them for making our lush bow. We fold each segment in turn with the front side inward. Press the fold.

Apply a little glue and step back from the fold a couple of millimeters.

Fold back the edges, slightly pressing the folds.

Here's a petal that should work out.

And if you look from above, then you should get such a bow.

We bend the ponytails lengthwise in different directions.

In this way.

We combine the edges together and solder it with a lighter or candle.

This is how the petal should turn out.

On the top along the middle, glue a bead or strass. Choose a color to match the petal. We make the rest of the petals in the same way.

We cut out a small circle of the base, about 4.5 cm and we begin to glue the finished petals onto it. We glue the petals a little overlap, in the first row we use about 14 petals.

In the second row, we also use 14 petals. We glue them as close as possible, without moving them to the center.

In row 3-4, we use 11 petals.

There are also 11 petals in rows 5-6.

7-8 rows have 8-9 petals.

And fill in the very middle by trying on the petals.

That's it, pretty fluffy bow for school ready. Such a bow can be made different color whichever you need.

Good afternoon, dear friends, here autumn has come, and with it your beloved school. Many of us have children, grandchildren and we want them to look nice and tidy. Therefore, I suggest you do cute bows for school, and they can also be worn by September 1. Bows can be made in different colors, which one you like best and, of course, so that they fit in the first place to the shape. The author of this master class, Irina Rakitina, she shared with us the manufacturing process bows.

To make bows you will need:
* Satin ribbon 2.5 cm in the desired color * Satin ribbon 0.6 cm in the desired color.
* Scissors.
* Lighter or candle.
* Threads to match the tape and needle.
* Lace.
* Cut out two circles with a diameter of 5 cm from felt.
* Glue at your discretion.
* Rubber bands.

Method for making bows:

We start to make our bows for school... We take a satin ribbon 2.5 cm in the desired color and cut off two pieces of three meters each. We also take a satin ribbon 0.6 cm and also cut off two pieces of 10 cm.Fold the ribbon 2.5 cm in half, front side should be outside. Singe the edge of the tape over a candle or lighter.

We take a thread with a needle and begin to collect the ribbon along the bottom edge. The author used white thread for clarity.

This is how we will collect.

Then we collect the tape so that we get an accordion.

Finish and singe the edge of the ribbon over the candle.

As a result, we should get two such blanks.

Now let's start forming the bow. We twist the finished tape into a hemisphere and fix it with a thread (you can use glue, here as you like).

We should get such a blank for manufacturing bantha.

And here is a couple of blanks for making our bows.

We collect the substrate. We tie a 0.6 cm ribbon to the elastic band, and make a hole in the felt circle. We insert the tail of the tape into the hole and glue it.

You can add a lace ornament to the bow and glue the backing.

This is how it should look from the wrong side.

These cute bows are ready for school.

Bows can be made in different colors, as mentioned above.

Chrysanthemum is a beautiful and unusual flower. Many craftsmen make these flowers with their own hands from various materials, satin ribbons, silk, leather, etc. Today we will consider a master class on making organza chrysanthemums, the author of this master is Milochka Nikonova. Such a flower is perfect for a first grader and will be a wonderful hair ornament.
My darling has already shared an interesting master class on making a cornflower from organza, if you have not seen this master class, I advise you to look.

To make a chrysanthemum, we need:

• Organza.
• Coins.
• Moment glue.
• Glass.
• Stencil.
• Beads.
• Scorcher.
• Fishing line.
• Needle.
• Brocade ribbon 0.3 cm wide.
• Monofilament.
• Scrunchy.

Chrysanthemum making method.
First, let's make a stencil for making petals. The stencil can be made from any tin can, the base width of the stencil is 2.5 cm and the length is 6 cm.

We take a burner and begin to burn organza petals according to a stencil, it is better to put the organza along the lobar thread. We need at least 32 petals for making chrysanthemums.

Now we will give our petals a shape. We take the petal and fold it at the base, first we wrap one side and then the other side and fix it with a burner. But if you want the chrysanthemum to turn out to be more voluminous, then when you have folded both sides, the back lower part of the petal needs to be pulled slightly upward and then secured with a burner (photo on the left). As a result, the petal will slightly lift and thanks to this the chrysanthemum will turn out to be more magnificent.

Take the organza and use a coin to cut out a circle with a base from a double layer of fabric. The more you use the base diameter, the more petals you need to make a chrysanthemum and the size of the flower will be correspondingly larger. The author uses a 2 kopeck coin from Soviet times.

Now we take the base and begin to fix the petals in a circle with the help of a burner. You can attach the petals in several ways, in order in a circle with an overlap, or one on the right, one on the left, one on top and one on the bottom. To glue the petals more clearly, it is better to use the second method. We do the next row in a checkerboard pattern.

When you have glued all the petals and you have the desired volume, then in the center you need to burn at two points.

Now we will make the middle of our chrysanthemum. Cut off a small piece of organza measuring 8 cm by 8 cm and use a burner to make cuts in the middle. Then we fold our blank in half and fold it in the form of a flower and then solder it to the center of the flower.

Now we take the second base circle and solder it along the contour, so we cover the back of our flower and sew on the elastic band.

As a decor for chrysanthemums, you can use various "pendants", the length of which is 12-13 cm, we fix them from the edge of the base mug. You can use fishing line, beads, etc.

All chrysanthemums are ready, brocade ribbons are used in this chrysanthemum.

Good afternoon, dear friends, today we will consider another master class on making a dahlia from chiffon.
On the site you could already see a master class on making dahlia from satin ribbon, if you have not seen I advise you to look and.
Now let's get back to the topic and consider another one interesting master class for making dahlia from chiffon, the author is Evgenia Bodyagina.

To make a dahlia, we need:

• Curtain chiffon.
• Petals pattern.
• Scissors.
• Lighter.
• Household napkin.
• Clay moment.
• Micro beads for nails.
• Cotton wool.
• Needle and thread.

Method for making chiffon dahlia:
We draw using a blank petal template. You will need 64 petals to make a dahlia. The first row will require 16 pieces, the second row - 16 pieces, the third row - 15 pieces, and the fourth row - 11 pieces. and on the fifth row - 6 pcs.

We take scissors and cut out our petals.

Now melt the edges of the petals with a lighter.

Fold the petals as shown in the photo and melt them with a lighter.

Now we cut out a circle of about 4 cm, Evgenia used a household napkin, you can use felt.

We begin to glue our petals onto the circle, first we glue four petals.

Then four more petals.

The first circle should be of 16 petals, then glue the petals with the second row, you should also get 16 petals.

We glue the third row of 15 petals.

The fourth row of 11 petals and the fifth row of 6 petals.

Now let's make the middle of our dahlia. We cut out a circle from chiffon, put cotton wool or synthetic winterizer in the middle and collect with a thread around the edges.

We shrink and get a ball.

We are ready to glue the ball in the middle of the dahlia.

Now the middle can be decorated, Evgenia used microbeads for nails.

All chiffon dahlias are ready, how you will use it is at your discretion. You can also make the middle of the dahlia differently, according to your desire.

A lot can be done beautiful and interesting flowers from satin ribbon... Today we will consider another master class on making a peony, the author of this master class is Galina Kuksenok. The peony is a very beautiful and delicate flower, so it is gaining more and more popularity.

To make a peony, we need:

• Satin ribbon 5cm.
• Candle.
• Cotton swab.
• Cotton wool.
• Templates.
• Thermal gun.

Peony making method:
First, we will prepare all the necessary tools and materials for making a flower, and then we get to work.
Take a satin ribbon in two colors. We will use pink for the middle of the flower.

We cut out the patterns of the petals, in total there should be 7 pieces. Galina drew patterns by eye, so the sizes are not standard:
1st template length 2.5 cm. Width 1.5 cm.
2nd template 2.5 cm long. 2 cm wide.
3rd template length 2.7 cm. Width 3 cm.
4th template length 3.7 cm. Width 2 cm.
5th template length 3.7 cm. Width 3.5 cm.
6th template length 4 cm. Width 2.6 cm.
7th template length 4 cm. Width 4.8 cm.

Take a satin ribbon and cut it into rectangles:
1 template - 12 pcs pink.
2 template - 4 pcs. pink, 3 pcs. beige.
3 template - 5 pcs. beige.
4 template - 7 pcs. beige.
5 template - 5 pcs. beige.
6 template - 6 pcs. beige.
7 template - 15 pcs. beige.

Now we apply the blank of the petal to the rectangle and cut it out, you can cut several blanks at once, it will be faster this way.

These are the petals that should turn out.

Burn the edges of the petals over the candle flame, without stretching the edge of the petal. Turn the wrong side to the candle.

In order for the tip of the petal to turn out a little curled, it must be brought to the candle and held a little, and then it will acquire the desired shape.

We scorch all the petals for our peony in this way.

This is how you should get it.

We take a cotton swab, drip a little glue on it and start winding cotton wool on it.

This is how it should turn out.

This is how we glue the first petal.

This is how the four petals should be glued, they should go a little over each other.

We glue the next row slightly above the previous petals.

So the second row is ready.

We continue to glue the petals in a circle.

Here's what we get.

Glue the petals seamy side to the middle.

We continue to glue the petals in turn.

Petals 7 blanks of 15 pieces, glue the front side to the flower.

Here's a peony that should turn out. We cut off the stick and it remains to add the leaves.

The satin ribbon peony is ready.

When I hear the word chamomile, a song comes to my mind.
The daisies hid, the buttercups drooped,
When I froze from bitter words.

Their love is fickle.
Why do you girls love beautiful,
Their love is fickle.

To make chamomile, we need:

• Satin ribbon 5 cm wide.
• Soldering iron.
• Ruler.
• Moment glue.
• Beads or the middle you like.

DIY chamomile making method:
Take a satin ribbon and cut off a 25 cm piece.

We cut the tape with a soldering iron every 3-4 mm using a ruler (the ruler is needed so that the cuts are even), you also choose the width yourself, it all depends on how wide the petals you want to get.

A closer view.

A little trick - so that the petals do not slide off during assembly, we make small notches with a soldering iron along the entire length of the tape.

We make a blank for a flower, wrapping it around the finger as in the photo.

Here is a blank obtained for the manufacture of chamomile.

We fix the layers with a soldering iron.

We straighten the petals, flattening the workpiece well, you can even turn them over and bend them down.

Apply a button and fill it with hot glue.

Close the inside with felt, press it tightly so that the button fixes the middle and does not allow the petals to straighten.

A flower with a center. Then you need to spread the Moment glue on the button and sprinkle with beads, let it dry.

Here is such a flower, it remains only to add the decoration.

Ready chamomile !!!