Programs for Android - Browsers. Antiviruses. Communications. Office
  • home
  • Cool programs
  • Sew children's winter overalls for boys. Children's winter overalls ready-made pattern. Stages of work on a sewing machine

Sew children's winter overalls for boys. Children's winter overalls ready-made pattern. Stages of work on a sewing machine

The magical winter has come - the time for fun winter activities and outdoor games. What can cause more affection in adults than the sight of children who happily jump, race along the beautiful snowy alleys and, moreover, play snowballs? However, one must remember that winter is also cold weather, when the likelihood of various diseases increases. Therefore, for caring and smart parents, winter is also a reason to renew their wardrobe.

Expressed simple language, a jumpsuit is a suit for girls and boys, representing a combination of jacket and trousers. Pattern baby jumpsuit will help you quickly make such a product. At the moment, the trend is very popular on the creation of children's overalls... They are not only beautiful but also comfortable, making them the very best clothing in kids' fashion.

A winter jumpsuit is a piece of outerwear. Every mom wants to dress up her child not only cute, but also comfortable. Such clothes show a variety of qualities that meet all important requirements seasons.

Due to their simplicity, these products can be demi-season, summer and even winter. It all depends on what you need a jumpsuit for and what time of year you are going to use it. The shops offer a large selection of this type of children's clothing, now a jumpsuit from jeans is in vogue. Denim products keep warm as well as winter things with lining.

When choosing a summer jumpsuit, it is quite important to look not only at appearance, but also on the material itself. If this is a winter product, then we look at the filler.

All girls want their kids to wear comfortable and comfortable products. Besides the fact that they should be cute, such things should keep babies healthy even during a very cold year.

Now very often make overalls - transformers... They can vary from removable gloves and knives for the smallest ones to removable sleeves and a removable special torso. As we went through earlier, this type of clothing is made from completely different fabrics: from fleece, from jeans. Such jeans clothes are in demand at different times of the year. There are also fur overalls, but they refer to the winter season, not the summer. If the child has a good warm winter jacket, then you can only take care of purchasing a semi-overalls - these are warm pants with straps, which, in combination with a jacket, are also a convenient option. warm clothes... You can cut and sew overalls and semi-overalls one by one, and such clothes will come in handy even for a newborn. A pattern for Lining for a fleece or warm overalls for babies from 0 months old, or older children, can be made with your own hands completely free of charge - construction will not be difficult.

Cutting and preparing materials

As for the material that we will use in our work, the choice depends entirely on your desire and imagination. The main thing, when choosing a material, take into account that we are doing a thing for a child, therefore, the following requirements must be presented to the material:

  • The material should be practical.
  • The material must be strong and not wrinkled.
  • The material should not cling to dirt, dust, moisture.

The main canvas should be about sixty or one hundred centimeters in size, the lining should only be created from quilted material of the same size. It is clear that we will choose the same dimensions for the linings. We also need a little decorative fabric for decoration.

Most likely, there will be no problems, different scraps and strips of such material can definitely be found in stocks of any woman. You will also need an elastic band of about thirty centimeters in length, a cord of about seventy centimeters, a flat zipper about twenty centimeters long and a spool of strong threads.

The finished pattern can be easily downloaded from the Internet. It needs to be printed on a printer in a 1x1 size, cut out, and then draw the fabric using a paper template. When cutting fabrics, keep in mind that you need to leave allowances of 1 cm.

Jumpsuit pattern for baby: how to sew

A simple summer jumpsuit is created with insulation and will keep your child from freezing. This versatile piece is suitable for both boys and girls. And it is pleasant and comfortable to walk in winter overalls even for a long time and that is why most parents prefer baby overalls. Basic description and important conditions for pattern.

Each newborn baby should have its own jumpsuit. Especially for those babies who were born in winter and cold weather. Overalls are a wonderful option for clothing, cozy and comfortable, does not hinder movement. A jumpsuit pattern for a newborn can be different types... This article presents the simplest and clear patterns that even novice seamstresses can handle.

A cute little thing for a child

Such a warm jumpsuit can be made before childbirth, during pregnancy.

The finished pattern of a knitted jumpsuit for a baby is shown in the photo below:

The same patterns are suitable for a transformer overalls.

Cozy fleece jumpsuit

Required options:

- fleece (1.5 meters);

- strong threads;

- 2 rivets;

- sharp scissors;

- paper;

- pins;

- ruler or centimeter.

First you need to measure the parameters of the baby. Add 1-2 cm to the measurements for stitching seams. Transfer them to paper with a simple pencil.

Cut out the cut out parts from paper. Transfer them to the fabric with chalk. Cut out the outlines from the fabric that have turned out. Hand stitch parts that have come out of the fabric. Try on this product on a child. If all fits, machine stitch the jumpsuit. After finishing the edges, try on the baby again.

Attach rivets in the required place. Then wash and iron the finished clothes. A cute fleece jumpsuit is ready!

Sewing technique on a sewing machine

Thanks to sewing machine you can easily and quickly sew the necessary clothes for the baby. For a winter suit, the following pattern is suitable:

For a complete set for a jumpsuit, you can also make mittens or booties with your own hands.

The most optimal size is 62-68, such a jumpsuit will be enough for a newborn for 1 or 2 seasons.

For work, you need to take the following materials:

- fabric from raincoat fabric;

- fleece lining;

- synthetic winterizer;

- 2 zippers;

- a simple cord and cord with an elastic band;

- a fixer and a tip for the cord.

Cut out details from raincoat fabric and lining. Transfer all patterns to a synthetic winterizer. Every detail will be insulated. When stitching, you get two layers.

Hand sweep patterns from raincoat fabric and padding polyester. This action is necessary so that the fabric does not wrinkle when sewing. Remove the protruding synthetic winterizer with scissors on all parts. Make folds on the central part of the front at the bottom and sweep it with a yoke. Sew strips of fleece to the center front piece in the places where the zipper will be.

Sew the fleece to the inner edges of the side sections of the front. Connect the sides of the front to the center section below the zipper. The staple location is marked in red.

Sweep open the slits for the locks. Then go to the back. Connect its parts and stitch to the front, except for the side edges, which must be sewn together with the sleeves.

Sew sleeves to front and back, sew seams on the sides. Next, proceed to the hood. Cut out the edging, sew a seam. Then join with piping stitches.

Step back from the laid seam 1.5 centimeters. Make a hood from the lining. Insert two parts one into the other, facing inward.

Sweep the lining and base fabric, and machine the seam.

Cut back the backing for the zipper. Place the parts of the front side inward and sew, leaving the junction with the neckline unstitched.

Turn over and sew the edge with stitches.

Fold back liner with hood, lining to lining. Baste and sew.

It should come out like this.

Connect obverse hood with jumpsuit.

Insert zipper.

Sew the details of the lining.

Make drawstrings for an elastic band from a raincoat fabric.

Sew a drawstring to the sleeves and pants.

Then sew on the boots and mittens.

Children love winter very much, because this is the most fabulous time of the year. Matinees, Christmas trees, gifts, a meeting with the wizard Santa Claus, who fulfills the most cherished desires and brings so many goodies - all this is Winter! The first snow transforms nature, dressing cities in white outfits, and so it invites us to go out for a walk with our kids, run along the snow-covered paths, lie in the soft fluffy snow. Winter games are the most fun! You can go sledding or ice skating, play snowballs, sculpt a snow woman. And in order not to freeze during walks, you need to dress correctly so that it is warm and comfortable, especially for a child.

We offer you the ideal winter outfit - a warmed jumpsuit with a hood. It is soft, comfortable, zipped, and reliably protects from frost. And if a cold wind blows, you can put on a protective hood and any frost will be of no use. In this lesson, you will learn how to build basic pattern baby jumpsuit, which you can use to model and sew various models for both boys and girls, you just have to use your imagination!

For calculations and drawing patterns, use your child's measurements. In the lesson, we use standard measurements of size 28 for a height of 104 cm.

Children's measurements required for construction (height 104 cm, size 28) (see details):

  1. Chest circumference (OG) - 56 cm
  2. Waist circumference (OT) - 53 cm
  3. Hip girth (OB) - 61 cm
  4. Neck circumference - 28 cm
  5. Front length to waist (RTA) - 27 cm
  6. Shoulder length (Dpl) - 8.5 cm
  7. Back length to waist (DTS) - 25.5 cm
  8. Armhole depth - 14 cm
  9. Hips height - 14 cm
  10. Sleeve length (Dr) - 36 cm
  11. Wrist circumference - 12.5 cm
  12. Upper arm circumference - 19.5 cm
  13. Outside leg length - 63 cm
  14. Inside leg length - 45 cm
  15. Knee height - 35.5 cm

Pants bottom width - 32 cm (the size depends on the model and personal preferences and can be increased or decreased)

Measure Seat height It is calculated as follows: Measurement 13 minus Measurement 14 = 63-45 = 18 cm. Also, the measurement The height of the seat can be measured.

Rice. 1. How to take baby measurements

16. Control measurement of planting depth(Fig. 2) - measured from the 7th cervical vertebra along the back, passing a measuring tape between the legs, to the jugular cavity along the front. This measurement is necessary to control the finished base pattern. For a comfortable fit, the measurement on the pattern should be 3-4 cm larger than the measurement taken.

Rice. 2. Control measurement of planting depth

IMPORTANT! The increase in freedom of fitting to the Semi-girth of the chest is selected individually, base the choice of the amount of increase, based on the thickness of the fabric and insulation, as well as the desired style of overalls - from 4 to 8 cm. building process.

Basic pattern of baby jumpsuit - building a mesh

We start construction from the upper left corner of a sheet of paper, put point A. Grid width: AA1 = ½ OG + 8 cm = 56/2 + 8 = 36 cm.

From point A, draw down a segment AD = Back length to waist + Leg length from the outside + 6 cm (increase in fit and lapel) = 25.5 + 63 + 6 = 94.5 cm.

From point A1, release the vertical line down, from point D to the right, draw a horizontal line. Point D1 was obtained at the intersection.

Armhole line. AG = Armhole depth + 1.5 cm (increase) = 14 + 1.5 = 15.5 cm.

Waistline. From point A, lay down the segment AT = TPA + 2 cm (for an increase) = 25.5 + 2 = 27.5 cm.Draw a horizontal line of the waist TT1.

Hip line. From point T, lay down the segment TL = 14 cm (Height of the hips as measured). Draw a horizontal line of the hips, points L1 and L2 are obtained.

Step line. From point T, lay down a segment of the vehicle = 18 cm (seat height) + 2 cm (increase for landing) = 20 cm.

Knee line. TC = 35.5 cm. Draw a horizontal dotted line of the knee; points K1 and K2 are obtained.

Pants bottom line. DH = 4 cm (trouser cuff). Draw a horizontal dotted line for the bottom of the HH1 trousers.

Draw horizontal segments from the marked points - points G1, T1, L1, C1, K1, H1, D1 are obtained.

Side line. Divide GG1 in half (point G2) and draw a side line vertically through point G2.

Rice. 3. Pattern of baby jumpsuit

Construction of a bodice pattern for a jumpsuit

Back pattern

Back neck. From point A, set aside 1 / 6ОШ + 1 cm = 28/6 + 1 = 5.5 cm and 1.5 cm upward (for all sizes) to the right. Draw the neckline of the backrest along the pattern.

Armhole width. Г3Г4 = Half-girth of the chest / 4 + 2 cm (increase) = 28.5 / 4 + 2 = 9 cm. From point Г1 to the left and to the right, set aside Г2Г3 = Г2Г4 = 4.5 cm (½ the width of the armhole).

Back shoulder line. From point P, set aside 2 cm down and draw a short horizontal auxiliary line.

Draw a line of the shoulder of the back equal to the Length of the shoulder in the measurement + 1 cm (increase) so that the extreme point of the shoulder lies on the auxiliary horizontal segment.

Draw a 2 cm perpendicular from the bottom corner of the armhole. Draw the armhole of the back as shown in the drawing.

Shelf pattern

Raising the front. From the waistline, set aside T1A1 = Front length to waist (accident) + 2 cm (increase) = 27 + 2 cm = 29 cm.

Shelf neckline. From point A1 with radius R = 1 / 6ОШ + 1 cm = 28/6 + 1 = 5.5 cm, cut out the neck of the shelf.

Draw the length of the shoulder of the shelf in the same way as the shoulder of the back.

Construction of a pattern of trousers

Front half of trousers

From point C1, set aside to the right C1C3 = 1/10 Hip half girth + 0.5 cm = 3.1 + 0.5 cm = 3.6 cm. C1C4 = C1C3. Draw the line of the C3C4 bow along the pattern.

Connect points C3 and H1 with an auxiliary straight line. Set aside 0.5 cm at right angles from the center of C3H1 and draw a slightly concave seam line.

Bottom line of the front half of the trousers. Н1Н2 = 1/2 Bottom widths by measure - 1 cm = 32 / 2-1 = 15 cm. Extend segment D1D2 by 0.3 cm on each side. Draw an arrow line vertically upward from the center of segment Н1Н2.

Back half of trousers

From point C, set aside CC4 = 1/4 CC2 + 1 cm = 18.25 / 4 + 1 = 5.5 cm to the left. Draw segment C4L along the pattern.

Arrow line. Divide the C4C2 segment in half and draw an arrow line as shown in the drawing - the point K4 and H3 is obtained.

The width of the bottom of the front half of the trousers is calculated by the formula: ½ Width of the bottom by measure + 1 cm = 32/2 + 1 = 16 + 1 = 17 cm. From point H3 set aside 8.5 cm to the left and right. Points H4 and H5 are obtained. Extend segment D3D4 by 0.3 cm on each side.

Connect points L2 and H4 - point K3 is obtained.

Measure the segment K4K3 and set aside the same value from point K4 to the left: K4K5 = K4K3. Connect the points C4K5, set aside an auxiliary perpendicular 0.7 cm long through the center of the segment to the right and draw a slightly concave line along the template.

On the shelf, build a piece of the stitching strip 3.5 cm wide, reshoot the piece of the strip on tracing paper separately. On the pattern, mark the width of the elastic drawstring.

Sleeve pattern for jumpsuit

Build a sleeve pattern as shown in fig. 4. CC2 = 3/4 Depth of the armhole for the pattern of the jumpsuit.

Rice. 4. Pattern of sleeves for baby jumpsuit

Hood pattern

To construct a pattern for a hood for a jumpsuit, you need to take 2 measurements: Head circumference and Head height (distance from the junction of the neck with the shoulder to the crown of the head).

Rice. 5. Pattern of a hood for a baby jumpsuit

The basic jumpsuit pattern is ready. You can use it without changes, or model the style according to your sketch. The details of the jumpsuit cut are shown in Fig. 6.

Rice. 6. Details of the cut of the children's hood

And now - a surprise for those craftswomen who completed the lesson completely and read the article to the end! We have prepared for you a basic pattern of a jumpsuit for a child of size 26-28 (height 104 cm) in full size and you! We wish you colorful ideas, bright models and a fabulously fun winter!

Overalls are a good solution for those who have the time and desire to sew something for the child with their own hands. This is also economically feasible: after all, fabric and accessories are cheaper than ready-made clothes. In such a thing (warm or lightweight), the child will feel good both in winter and in summer. It will be convenient for him to run, jump, explore the world. Or sleep in a stroller, if he is still very tiny.

Overalls are recognized as one of the most comfortable and practical things in a children's wardrobe. In both winter and summer versions of this costume, the child is protected as much as possible. In winter - from the cold, in summer - from dust and dirt. The baby's movements are free, maximum comfort is ensured: nothing falls off, does not open if the clothes are zipped or Velcro.

Sewing a baby jumpsuit yourself is easy, you just need to show a little patience and diligence.

You can decorate such clothes in any way - with many pockets, embroidery, applique.

When sewing, pay attention to the following points:

  • The seams should not be rough, especially if the clothes are summer.
  • The fabric may contain a small percentage of synthetics so that it does not shrink during washing, but if we are talking about a summer jumpsuit, then this impurity should be small. A damp-resistant demi-season suit will be synthetic, but then it is better to provide a "breathable" lining.
  • It is better to choose a spacious fit so that the baby is really comfortable.
  • Velcro is easier to sew on than a zipper, but it will be easier for an older child to accidentally undo it.

A jumpsuit made of waterproof, raincoat fabric will solve the problem of autumn dampness. Summer jumpsuit made of natural fabrics will be ventilated, easily washed after violent games. Denim top and pants are the most practical option for walking.

How to make a jumpsuit pattern yourself

You will need parameters. Measure your child's height, back length, arm sleeves, neck, waist and chest. It will be possible to operate on these figures further. Additionally, you may need the depth of the armhole, the length of the shoulder, legs, wrist circumference.

IMPORTANT! When building a pattern, make allowances for seams - 1.5-2 cm.

The length of the sleeves and legs will also need to be calculated with a margin of 4–5 cm for the hem. At the same time, very many drawings of patterns are just made without taking into account allowances, and you will have to make an amendment yourself.

As a rule, the pattern of a jumpsuit consists of details of the legs, front, back, sleeves with cuffs and a hood. In other versions, half of the back and half of the sleeves are one piece, similarly divided into two pieces of the front.

Lining is required for winter overalls, optional for summer ones.

You can use a ready-made pattern.

Ready-made pattern of winter overalls with a hood for a child from 1 to 3 years old

Consider the scheme for constructing the design of a winter overalls with a hood from three parts. Due to the long fastener from the throat to the bottom, the baby will be comfortable to wear, the pockets will allow you to hide mittens or frozen hands on the way home.

Here calculations are made for a height of 80–90 cm, but you need to substitute your measurements.

Or jumpsuit with one zipper and funny "ears".

Pattern of a summer jumpsuit for a baby from 3 to 5 years old

Summer sets will appeal to both boys and girls. Short or long, bright and fun, this jumpsuit is ideal for playing in the sandpit and running around in the yard.

Here's a fun and pretty simple option - short sleeves and pants, buttoned up.

ATTENTION! Before cutting the material, it makes sense to pre-wash it in warm water so that the fabric shrinks. Then you will not have frustration after sewing and the first wash. This is especially true of natural materials - flax, twill, satin, chintz.

There is a so-called lazy way to sew the simplest summer jumpsuit. It can even be carved out of old things. Since the jumpsuit will be very loose, you can cut it without first building a pattern. A method for very courageous mothers with experience.

Here you only need the "seat length" value. It is measured between the legs, a measuring tape is applied from the back to the waist and passed to the front.

Then shorts are made. A + B - just the depth of the seat.

In this case, the top is made from an old blouse or dress, but the same piece can be cut out from a regular cut. For the top, you need the length and width of the back plus 1.5-2 cm allowances for the seams.

The armholes of the sleeves are decorated with frills to taste. Instead of a fastener, you can insert elastic bands or sew the jumpsuit so that it can be removed and put on as a whole, without fasteners. An elastic band at the waist helps for reliability.

ADVICE! When a long jumpsuit is sewn, it is easy to foresee the possibility of growth. For this, the legs are made a little longer than necessary, and are processed with a wide lapel. The baby adds a centimeter in height - you release a centimeter of spare tissue.

Pattern of denim overalls with elongated shorts for a girl 5-7 years old

Jeans are good for fall, spring and summer. This is a natural fabric, practical, so the girl will be comfortable in it. The younger your fashionista, the thinner it is better to take the fabric.

That's very A simple jumpsuit that can be decorated with contrasting fabric cuffs.

Added to it is a stylish belt that can be tied with a bow.

Important: denim should be sewn with a special thread. It is better if the sewing machine has a hardened, extra strong needle, suitable for this type of work.

You can give preference to stretch jeans, as it will be convenient to run in it, and ride down the hill, and climb the stairs. Stretch requires a special sewing mode on the machine.

Decor and decoration elements

In childhood, you can afford the most mischievous clothes, and the ways of decorating it are varied. You just need to follow a few rules:

  • jewelry should not come off easily if the child is still young;
  • the decor should not be with the use of synthetic smear paint.

Everything else is just for the good!

The embroidery should be applied to the details before they are sewn. But decorative patches, patch pockets and so on - as you like.

Decals in the form of boats, animals, leaves and flowers look good. You just need to iron them with an iron over the finished item.

IMPORTANT! Don't overdo it with decorative elements. Give preference to those that are difficult to tear, spoil, tear off. Think about how you will wash the new thing. Often, a patch pocket with applique is quite a sufficient decoration.



Top related articles