To begin with, we make a Christmas wreath with our own hands from the simplest, brightest and most festive material at hand, which is in abundance in every modern home. Let's try to make a Christmas wreath from balls with our own hands, this will require a fairly large amount of data for Christmas tree decorations. But they are now inexpensive and are offered for sale in a large assortment. Making a Christmas wreath with your own hands can be combined with communicating with children, it is worth actively involving them in such work.
Materials:
- foam base;
- Christmas balls;
- beads;
- decorative dragonflies and butterflies;
- ribbon;
- jersey.
Progress
Cut a strip 2-3 cm wide from the knitted fabric and decorate the foam base.
Get your Christmas balls ready for use. Use wire cutters to remove the protruding part from the ball.
Heat the glue gun to the correct temperature. Stick the balls on the base, try to stick tightly, without gaps.
Decorate the wreath with beads, decorative dragonflies and a butterfly. From the remnants of the beads, make a suspension for the wreath.
Make a bow out of a mesh ribbon and glue it to the wreath.
Advice:
Use balls of the same color, but different sizes, with different surfaces (shiny, matte, mirrored, etc.). Then the wreath will look brighter and more spectacular.
A wreath will look no less beautiful in combination with a decor of cones and balls painted in the same color.
Beautiful Christmas wreaths with your own hands can be made from the most ordinary balls of thread that are idly lying around in the bins of the needlewoman. It is enough to show imagination and an unusual decor element will decorate the house. In order to make a Christmas wreath from threads with your own hands, you just need to follow the instructions of the master class below.
Christmas wreath of threads in the photo
Materials:
- corrugated board base;
- a piece of knitted fabric;
- threads of various colors and textures;
- small size red Christmas balls;
- satin ribbon;
- beads.
Progress
Cut out two circles of the same diameter from corrugated cardboard, make a hole in the center.
Please note: there are longitudinal stripes on corrugated board, glue the circles together so that the stripes on the first base are perpendicular to the strips on the second. This is necessary for greater strength of the base and so that the cardboard under the weight of the decor does not bend along these strips.
Cut a strip of fabric about 5-6 cm wide and 2 m long.
It is convenient to use jersey to decorate the base, since the edges of jersey practically do not crumble.
Wrap a cardboard circle, layering one layer on top of another, glue the tip of the fabric to the base.
Wrap a lot of balls of different sizes from the thread. Balls can be made in one of the following ways:
as a base, you can use small foam balls that are sold in creative stores;
Or take a piece of newspaper, crumple it and wind the threads around it until a ball of the correct round shape is formed.
Heat the glue gun to the correct temperature and start gluing the balls to the base. You can move in a circle, clockwise, gradually filling the space of the base, or in a chaotic manner, first glue large balls, then medium and small ones. You need to make sure that there is no free space, so try to glue the balls tightly enough to each other.
The remaining unfilled areas of the base can be masked with Christmas balls by gluing them over the glomeruli.
Wrap the wreath with decorative beads, fix the ends of the beads with glue on the back.
Use the same beads to make a suspension for the wreath.
Make a bow from a wide braid, glue to the beads.
In order to make a Christmas wreath from cones with your own hands, you need to stock up on these natural materials in advance. It is very difficult to get them on New Year's Eve in December. Therefore, the idea of \ u200b \ u200bmaking such a New Year's Christmas wreath with your own hands is more suitable for thrifty people.
Christmas wreath of cones in the photo
Materials:
- foam base;
- Pine cones;
- silver paint in a spray can;
- gray satin ribbon;
- glue gun;
- silver mesh fabric;
- silver cord.
Progress
Decorate the foam base with satin ribbon.
Fix the tip of the tape with glue.
Glue the bumps in a circle. Thus, you need to fill in the entire base. Try to place the buds as tightly as possible to each other.
Paint the finished wreath with silver paint from a balloon. Let the paint dry.
Attention! Only paint in a well-ventilated area!
Cut a few wide strips from the silver mesh. Tie the stripes with a bow and glue them to the wreath. Bows must be placed at the same distance from each other, symmetrically.
New Year's festivities and celebrations, loved by everyone since childhood, are approaching. But everyone knows that the fabulous atmosphere is soon replaced by a radiant holiday. Christ's Nativity... On this day, all people deify the birth of the Baby, celebrate and glorify this wonderful event. On this day, it is customary to decorate your home with a Christmas nativity scene.
A nativity scene is a sketch depicting a holy family with a newborn who has found shelter in a stable (cave). Such a scene will make anyone feel like it, because bursting joy, holy hope, tender peace and sincere love are felt in it:
On a free evening this December, you can create a Christmas nativity scene with your own hands in a company with children, which will be much more interesting and exciting.
Origin and traditions of the nativity scene on the eve of Christmas
The centuries-old plot of the long-awaited holiday is also reflected in contemporary art: a quiet night time, a radiant star in the sky, a cave intended for livestock, tiny Christ who fell asleep in a manger next to Mother. The tradition of creating such compositions using figures from various materials appeared in our country thanks to European countries not so long ago, but has already taken root. In many states where Christianity is present, the established order has not only been preserved, but also received individual characteristics.
For example, in France, participating figurines are hand-painted with brown paints. In Germany and Italy, they are made from a wooden component and varnished, saturating with the smells of flowers or incense. In Mexico, characters are made from earthenware and porcelain. In Japan, they are dressed in national costumes and do not outline their faces. In the UK, figurines are Christmas edible.
The main components of a nativity scene
Not sure how to make a nativity scene? Let's figure it out. It is known that the structure depicts a barn (cave), so it should be cozy and modest according to the established canons. In its upper part, as a rule, there is an angel or a star, personifying the onset of the holiday. It looks beautiful if the Star of Bethlehem is cut at the base, and a burning candle is placed at the back of the den. A stunning sight of the illuminated sky is created:
Inside the composition, there is a manger with a little Jesus, figures of Mary and Joseph, hay, and domestic animals. At the entrance to the created atmosphere - the wise men and shepherds, who have just learned the good news and are blissful.
The number of figures in the Christmas composition is not limited, but the presence of the main characters - Christ, the Mother of God and Saint Joseph - is important.
Of the animals, a donkey, a lamb, and a calf are often chosen. Each figurine is not just a doll. You cannot play with the heroes, the whole structure is static and is an integral symbol that reminds us of the coming of Christmas. In our country, sometimes family figurines are replaced with the famous Christmas icon:
It is customary to install a nativity scene in churches and apartments after the noisy New Year (starting on January 2), when the Christmas festival begins. It is removed after Christmastide (within January 19).
How to create a nativity scene?
There are a lot of options for forming a work. It all depends on your creative possibilities and limitless imagination. The design can be either simple or highly professional. Consider the popular and uncomplicated models that are created from the tools that are at everyone's hand.
The process is similar to organizing a dollhouse, so a box with a cut-out wall, an inverted basket, an ordinary constructor or game cubes, collected brushwood branches in the form of a hut can serve as the basis:
On the sides of the ensemble, you can place decorative artificial plants, flowers in pots. The location of the den under an elegant Christmas tree looks interesting, in addition to cotton wool depicting snow, a thin layer of salt, sugar poured onto glue, and in some cases even glitter.
The floor in the composition can be made in the form of a stone filling using poured lentils or beans. The cardboard base is harmoniously replaced by ordinary draped fabric:
It's great if you manage to illuminate the composition with a garland. This creates a festive atmosphere:
Nativity scene with toys
Creating a design with my own hands, you can easily dilute it with the help of figurines of angels and animals from existing souvenirs or toy sets. Festive tinsel, herbarium elements will make your nativity scene unique!
Can you crochet? It is possible to create a unique version with knitted elements. And even fully knitted!
Nativity scenes made of paper
Christmas paper nativity scene is quite popular and not difficult to execute. In this case, the figures are drawn on a paper base, cut out and placed on the main surface:
The bodies of the characters can be made in the form of a cone by adding flat handles or heads. So the models will acquire a volumetric format. The heads of the figures are also made, as your imagination allows, from dough, clay structure, plastic balls, etc.
The silhouette design looks amazingly beautiful and original:
Nativity scenes with the use of plasticine
Plasticine for creating festive figures is quite affordable and easy to use. In the case of using alternative plastic, the structure can serve for more than one year. Everything in this situation will depend on your creativity and the availability of free time.
Salted dough and soft clay
A more professional model, in comparison with the previous version, will be such material as salty dough or clay. Figures created from such components look the most natural and lively. But this will take a certain amount of time. The blanks are first baked in the oven, and then painted with gouache or special waterproof paint:
The composition even from unpainted dough looks quite dignified and attractive:
Other popular techniques
The numerous options for creating Christmas nativity scenes with your own hands are simply striking in their novelty and originality. There are variations made in origami craftsmanship, neatly carved from wood, assembled in the shape of a doll from fabric, assembled from small plastic containers, pasta.
Today there is a huge selection of ready-made structures for sale - made of rubber, wood, plastic, as well as special paper blanks or patterns.
But a self-realized composition, even imperfectly made, especially made in collaboration with your little ones, is very dear to every family. Your own work can be stored, supplemented and revised every year. Some of them take with them on a visit to share the festive mood with their loved ones.
For home craftsmen we offer a very interesting and beautiful option creating a nativity scene in a simple matchbox. Enough original technique and improvised items make it possible to create a real masterpiece, which, moreover, is convenient to store by simply closing the boxes. You can see how to make such a structure at home by reading the following video:
Do not be afraid to fantasize, implement the most daring ideas for creating a den and your house will be filled with the real atmosphere of Christmas!
Do you think that wreaths are hung on the door only on the eve of the New Year? Nothing like this. Craftswomen make jewelry for any occasion. They can be the onset of autumn, the birth of a child, or the celebration of Easter. How to make a wreath on the door with your own hands, read below.
Hemp decoration
How to make a wreath on the door with your own hands? Build it from hemp. Where to find them? Go to the forest. A walk in the fresh air will cheer you up, and if the journey has a purpose, then walking among the trees is doubly pleasant. The girl can take her friends into the forest, who will file hemp out of a fallen tree. These blanks for the future wreath must be dried well. But don't put the tree on top of the battery. The cuts should dry naturally. This can take a week or a month, depending on the thickness of the workpieces.
When the cuts are dry, you can make a craft out of them. We fold a circle from the blanks and glue the parts together with a hot gun or superglue. When the first ring is ready, you can start making the second layer. You need to create a circle that will be slightly smaller in diameter than the blank that is available. Glue dry twigs to the lower right needle. We tie a bow from burlap and decorate it with cones. The composition can include live or dried flowers, physalis, pine or Christmas tree branches, as well as soft pom-poms.
Cone wreath
Craftswomen sculpt such a door decoration for the main winter holiday. Even a child can make a New Year's wreath on the door from cones with his own hands. There is no need for any special skill and talent. Putting buds together is easy. But before you can do this, you need to do the preparatory work. You should paint the buds white, silver or gold. In the meantime, they are drying, you can make a stencil for the wreath. A circle should be drawn on a piece of Whatman paper. The easiest way to get flat geometric shape is to circle the plate. When the buds are dry, they can be glued together. This should be done with a glue gun. We spread the cones along the drawn circle and fasten them together. You don't need to glue anything to the paper, the stencil was designed so that the wreath has a round shape. When finished, you can add decorative details to the product. For example, glue rowan berries or red beads. You can buy plastic birds or make them out of plasticine.
Autumn wreath
Such a decorative item can often be seen on the doors of shops and children's centers. In general, those establishments that devote a lot of time to the decor of the premises. How to make a wreath on the door of the autumn theme with your own hands? To make it, we need: willow branches, small yellow leaves, cones, acorns and berries. First you need to make the base. It is made from willow branches. They twist together, and then a torus is rolled out of a thick braid. The ends of the branches should be fastened with threads. Now you can decorate the form. We attach the cones to the wreath first. They are large and take up a lot of space. The next turn of leaves. They can be pre-ironed with an iron so that they are preserved for a long time and not deformed. Last but not least, small decor should be glued. Acorns and berries take up little space and can fill the space between buds and leaves.
Wreath of branches
You don't have to go to the forest to make such a craft. You can go to the park. What is the wreath made of? From thick branches. You do not need to cut them from the trees, you can pick up the already broken ones. It is most convenient to cut branches with pruning shears, but you can do this with a knife or even scissors. How to assemble a wreath on the door with your own hands? We draw a circle shape on a Whatman paper. This will be a stencil with which the wreath will take on an even shape. We spread the branches in a chaotic manner in a circle and fasten them with a hot gun. When the wreath is ready, you need to decorate it. It is best to create such a product in spring, when nature is in full bloom. And accordingly, you can decorate the wreath with branches of a blossoming apple tree, cherry or lilac. If desired, live branches can be replaced with artificial ones.
Ball wreath
This cozy piece is reminiscent of winter. It is very easy to create a wreath on the door with your own hands. To make it, you need balloons, threads and glue. We inflate the balls, but not too much, so that they just take on a round shape. We take a ball, thread its end into a needle and pierce a bottle of glue. We stretch the thread and wrap a ball with it. You need to wind in different directions and in different directions. When this stage of work is completed, cut the thread and hang the ball to dry. Thus, blanks need to be made from different yarns. different color and size. While the balls are drying, you should prepare the snowflakes. You can either buy them in a store, or you can make them yourself from liquid silicone. It is very simple to make them: you should warm up the pistol and draw a snowflake on a piece of paper. Until the silicone is dry, you need to sprinkle it with white powder or glitter. Now we take the blanks, pop the balloons that are inside, and lay out a circle from the balls made. Moreover, we form it not into a flat geometric figure, but into an arbitrary, slightly asymmetric one. Decorate the resulting wreath with snowflakes.
Original wreath
Such decor looks very appropriate not only during the period new year holidays but also throughout the winter. How to create a wreath on the door with your own hands? A photo of such a product is given above, for its manufacture you will need willow branches, thick woolen threads and plastic. The first step is making the mold. From the branches you need to twist a tourniquet and give it a circle shape. In this position, you need to fix the workpiece with threads. Take the branches again, this time we wrap the shape with them. To prevent the wreath from scattering, its right half should be tightly pulled with a thick white thread. The base is ready, you can move on to the decor. Stars need to be cut out of white plastic. This can be done both with a clerical knife and with a firelighter. We glue the stars on the wreath. In the middle of the finished product, you can place willow branches, which should first be sprinkled with foam or artificial snow. You can also hang plastic balls filled with stars.
Christmas wreath
It will be very easy to make such a decorative element. How to make a New Year's wreath on the door with your own hands using a similar technique? We take willow branches as a basis, which we twist into a ring. In order for it to hold, we wrap it with several rods. The form is ready, it remains to tint it. To do this, you need to dip a sponge in white paint and paint over the top side of the wreath with it. Now you can glue snowflakes, beads and other small decor to the base. In the center of the wreath, place the silhouette of a Christmas tree cut from plywood. This blank can be purchased at a craft store. We glue snowflakes and hearts on the tree. We outline the workpiece along the contour with white paint. Ribbons and threads can be tied to the tree leg, which are combined with a common colors crafts.
Universal wreath
Such decoration will be relevant both in winter and summer. You can make this decorative element with your own hands. There will be a Christmas wreath on the door if you decorate it with fir branches, and a summer wreath will be if you decorate it with moss. To create this design, you must purchase a special sponge at the florist store. It is she who will allow living plants to stay fresh longer. Cover the sponge with moss on all sides and press it into the wreath with effort. The main thing is to reinforce the green flooring in the mold. You shouldn't worry about the moss, it will rise later. Spruce branches are easier to fix. Their sticks will grip well on the sponge. When the wreath is ready, you need to sprinkle it from the spray bottle. The product can be additionally decorated with brown branches, with which you need to braid a torus of plants. Figures of white Christmas trees should be reinforced on the inside of the product. It can be both plastic decorative items and New Year's lanterns that run on batteries.
Spikelets wreath
Such a product is created in an elementary way. A round shape is made from willow branches. And spikelets are glued to it obliquely. You can use threads as a fastener. But still it is safer to attach it to the glue gun. When the wreath is ready, you can decorate it natural material... These can be cones, leaves, or reeds. If you want to tie a bow, then make it out of burlap.
New year wreath
Since for the first time this decoration was made precisely during the period of everyone's beloved winter holidays, it is not surprising that today the creation of a torus from spruce branches is considered a tradition in many countries. How to make a New Year's wreath on the door with your own hands? A photo of such a product is presented above. To create it, you will need spruce or pine branches, and it doesn't matter if they are artificial or real. If you do not have such a decor on your farm, you can close the base with tinsel.
A do-it-yourself Christmas wreath on the door is created as follows. Branches are attached to the foam base with a glue gun. They need to be placed not in a chaotic order, but to set a single direction. When the base is ready, move on to the decor. We glue the cones on the wreath, which must first be dipped in white paint. You can add balls of threads, buboes of different sizes and a decorative sacking bow.
Wine cork wreath
What do people do on New Year? They drink, eat and visit. But not many people know that you can make a wreath on the door from wine corks with your own hands. New Year is a holiday that requires careful decoration of the apartment.
How do you create a wine cork wreath? In order to fold an even circle, you will need round pattern... It can be made from newspaper or paper. We circle a large dish and lay out the corks along the pencil outline. We fasten them together with a glue gun. The right side of the wreath should be decorated with spruce or thuja branches. On top you can stick multi-colored balls. And we scatter the colored beads in bunches over the corks.
Spring wreath
We will create such a decoration from a newspaper. We divide the printed edition into pages and twist them into bundles. We attach these tubes to each other with a stapler. Now you need to form a circle from the newspaper. When the base is ready, it should be poured with glue. This is done so that the wreath keeps its shape well. When the workpiece is dry, it needs to be wrapped with willow branches or vines. Figures of birds and nests should be glued to the lower inner part of the wreath, and live branches will help to complement the composition.
It's December - which means that pre-new year mood has already captured everyone who expects magic and joyful events in winter. In order to fill everything around with the spirit of the holiday, everyone seeks to surround themselves, one of which is a Christmas wreath.
How did the tradition of decorating a house with wreaths come about?
Decorating your home this way is enough ancient tradition that came from Western countries. It is worth noting that Christmas wreaths on Russian doors looked quite exotic until quite recently.
The idea of creation belongs to Johann Wiechern, who lived in Hamburg. He was wealthy enough that he could afford to help orphans. The kids were looking forward to Christmas and constantly asked their caregiver when it would come. Then Johann decided to present them with a small gift - taking an old wheel from a cart and placing 16 candles on it, he hung it on the door. 12 candles were red and not very large, and the other 4 were much larger and white... Every morning Johann, together with the little ones, lit one red candle, and on Sunday one white one lit up. It turned out to be a kind of calendar, which made it possible to count down the time until the long-awaited holiday.
Wreath- It is not simple symbol of Christmas and New Year, it is also a kind of amulet for the house, which protects all its inhabitants, brings happiness and prosperity. Round shape the wreath symbolizes endless life, green color- good health, and small candles personify the warmth of the family hearth.
How to make a frame for a wreath?
It can serve as a basis tree or metal wire, as well as coniferous twigs and even paper. The strength of the entire structure and its durability depend on the choice of the base. So, the classic base can be straw, grapevine, willow twigs and even rim from the old wheel... If this is not at hand, ordinary metal wire will also be a good basis for Christmas decorations. Another option is unnecessary wires(for example, an old extension cord), which must be twisted tightly together. If you do not know how to make a Christmas wreath with your own hands, the photos will help you understand the basic principle of work.
Small piece of old hose, thick cardboard, and pieces of old newspaper twisted between themselves and fastened with wire, as well as fabric in the form of a roller, filled with cotton wool or padding polyester - all this and much more can serve as an excellent the basis for the Christmas wreath.
How to decorate a Christmas wreath?
For decoration, you can use the classic ones - Christmas balls, tinsel, artificial candles and small figurines of angels. However, the symbol of the hearth and the approaching magic deserves a greater manifestation of imagination, so it is worth making a little effort to ensure that every detail of this new year miracle was of particular interest.
Textile
Bright ribbons in red, green, gold and silver will decorate your Christmas wreath and give it a festive look. If you wish, you can complement the composition with a bow made of beautiful fabric.
Cones
This decorative element was presented by nature itself. To make the buds look brighter and more attractive, you can paint them with silver paint.
Needles
Coniferous or pine twigs can be replaced with thuja or juniper legs. Artificial spruce legs are sold in a decorative jewelry store - in this case, the wreath will last for several years.
Berries
Juicy and beautiful berries will remind you that autumn is over, and frost and snow are ahead. They go well with both straw and green spruce legs.
Flowers
Fresh flowers on wreaths are very rare, as they quickly wither. But in Lately stabilized plants have emerged that can be incorporated into even the most complex compositions. If you do not have such elements at hand, then replace them with dried flowers.
Yarn
An original way to decorate a wreath is to add knitted ornaments or pom-poms made from yarn to it. Stylish and unusual.
Candy
What can please children more than sweets? Brightly wrapped candies make a great decoration, but can quickly disappear from the base.
Paper
Decorations can also be made from plain craft paper. Flowers, animal figurines or New Year's motives - it all depends on your imagination.
Leaves
Dried leaves will perfectly complement the wreath that reminds of the end of this year. This composition will be complemented by cinnamon sticks and dried fruits.
DIY Christmas wreath: step by step instructions
How to make a DIY Christmas wreath step by step? Such a decoration will not only delight the eyes of others, but also exude an extraordinary aroma - another symbol of the upcoming holiday. However, it has a small minus - sooner or later the needles will begin to crumble.
Required materials and tools:
- strong and flexible wire (from 2 to 4 meters);
- threads;
- neat twigs of real spruce (can be replaced with juniper, thuja twigs, etc.);
- liquid nails or glue;
- cones, multi-colored ribbons;
- sweets and nuts;
- bunches of rowan or viburnum.
First you need to make a wire frame. To do this, you need to wind it in a circle of a suitable diameter and fasten it together.
After that, you can start decorating the green base. All elements can be fastened both with glue and by winding them with wire to the base.
Christmas wreath: photo
How to make a Christmas wreath with your own hands: video
To create a New Year's mood, in addition to the traditional Christmas tree, there is a long-standing custom of hanging a Christmas wreath on the door. This tradition came to us from Western countries, and not so long ago. Such a decoration was considered unusual and exotic, and now the Christmas symbol adorns the home of almost every family.
The traditional decoration is made from twigs of a Christmas tree and four candles, attached to the front door or mounted on festive table... But we will tell you how to make a Christmas wreath with your own hands today.
How did Christmas wreaths come about?
New Year's wreaths appeared thanks to Johann Hinrich Wiechern, a Lutheran theologian who raised children from poor families. During the period of fasting, they often asked Johann if it would come soon. To help poor children, in 1839 he invented a wheel wreath and decorated it with nineteen small and four large candles. Every morning, one small candle was lit in the wreath made by the Vyherny wreath, and on Sunday a large one, thus counting down the time until the onset of the holiday.
What does the symbolism of the Christmas wreath mean?
In a wreath, the presence of light and fire (the light of the world) is considered a mandatory attribute. This symbolizes the coming holiday - the birth of Jesus Christ.
The Christmas wreath has a round shape and is decorated with spruce twigs, ribbons and candles. The circle is considered a symbol of immortality (eternal life), and four candles are the illumination of the world, the green spruce branches are itself.
Traditionally, when making the symbol of Christmas, two colors should be used - three purple candles and one pink.
How to make a DIY Christmas wreath?
Today the stores offer a wide selection new year wreaths... They are made from different material: artificial spruce branches, fabrics, knitted ornaments and other items. A huge selection of jewelry will allow you to choose one or another model that you like.
Despite such a variety, more and more people prefer to make jewelry on their own, showing their own imagination and creativity. If you are thinking about how to make a wreath for Christmas with your own hands, then you should not think that it is very difficult. The process of making such a decoration is very reverent, because in its creation a person puts the kindest thoughts, and is in anticipation of the long-awaited.
What do you need to make a wreath?
- Bendable wire, ring or round base for the product.
- Sharp garden shears.
- Liquid nails or all-purpose glue.
- Fir branches.
- Ribbons of different colors.
- Paint and brushes.
- Candles.
- Bows, berries, cones, dried flowers and other decorations.
Manufacturing instruction
- First, a base is created, it can be made from bendable wire. Use a sharp garden scissors to cut the wire to the desired length and connect it into a ring.
- Spruce branches are laid on the wire base, clockwise, it is better to use thick gloves so as not to injure your hands. The branches are fixed with small pieces of wire, which then need to be hidden discreetly, or painted with green paint. To make the wreath splendid, spruce branches can be applied with a second layer, only in the opposite direction.
- Decorate the product with decorative ribbons and cones, you can also use scrap materials. Show your imagination and your Christmas wreath will turn out to be the one and only one among the rest.
- The material you have selected is easy to attach to spruce branches with all-purpose glue or liquid nails. Do this carefully so as not to leave glue drips on the product.
- After you've finished decorating the Christmas symbol, let it dry a little. After 30-40 minutes, you can safely decorate the front door or the festive table with it.
Video instruction - decoration from balls
Video instruction - decoration from cones
Video instruction - with sisal balls
Making a DIY Christmas wreath at home is not so difficult! It is quite simple to make it, the main thing is patience and a little imagination, and this holiday will become unforgettable for your whole family.
