How to make a paper swan for children. Swan: origami paper. Step by step assembly and instructions for beginners. Materials and components

The classic origami technique is the folding of various paper crafts without the use of scissors and glue. Besides classical technique, other types of work with paper have become widespread. One of the most popular is folding three-dimensional figures using numerous paper modules. The modular origami swan is a prime example of how beautiful figurines are created using triangular details.

Bright volumetric models catch everyone's attention. It seems that the creation of such works requires special knowledge and skills. However, even a novice amateur can collect a similar craft. It is worth carefully studying the master classes on this technique, and following the recommendations of experienced craftsmen. Crafts made using this technique require, first of all, attentiveness, perseverance and diligence.

Each wizard has its own constructor. This constructor includes the disassembled elements of old or failed shapes. Also pre-assembled triangular parts for new works. To create modules, use color or White paper A4 format.

The sheet is divided into 2, 4, 8, 16 or 32 equal parts. Most often the paper is cut into 16 or 32 pieces. For children, to make it more convenient and easier for them to assemble the craft, the paper sheet can be cut into 4 or 8 pieces.

To get 16 identical rectangles, the paper sheet is divided in width and length into 4 equal parts. For 32 rectangles, the sheet is divided in width by 4 and in length into 8 parts.

Triangles are collected from such rectangles to create volumetric paper figures.

To make a module, you need:

1. Bend the rectangular sheet in half. Bend the resulting rectangle in half again and unbend it. This is how two main folds of the workpiece are outlined.
2. The edges of the rectangle are folded towards the centerline. The figure turns over.
3. The bottom edge rises. The corners on the left and right are bent along the line of the large triangle.
4. Unfold the bottom.
5. Small triangles are folded along the outlined lines from below. The edges rise.
6. The resulting triangle is bent in half. The result is a module with two pockets and two corners.

Triangles can be attached to each other in three ways:

• They are connected by long sides.
• The connection goes through the short sides.
• One module on the short side, two on the long side.

Which assembly method is used is usually indicated in the instructions for the diagram.

For newbies

Beginner lovers definitely need detailed step-by-step instructions for assembling a paper swan using technology modular origami... Such instructions and step-by-step explanations can be seen in the video master classes by recognized origami connoisseurs.

There are many groups that share a love for this type of creativity, and where you can get advice on how to make origami a swan from modules with your own hands.

For beginners in specialized stores are presented great amount kits for working in the modular origami technique - swan figurines and assembly diagrams step by step.

Before you start assembling something as graceful as the modular origami of a beautiful double swan, you should practice on lighter models. Simple models can also be assembled by a preschooler with the help of educators in children's institutions or with the help of a mother.

The most tedious thing for a child is the creation of triangular modules. Fine motor skills are not yet developed properly, and it is difficult for the baby to collect small parts. That is why it is better to assemble large and medium-sized modules for children's crafts. Children preschool age They quickly get tired of monotonous boring work, so the mother's task is to help make blanks for crafts.

It is better to allocate a special time and day when all family members will jointly assemble an openwork air composition. The elements necessary for creating a volumetric figure must be prepared in advance. It will be interesting for the child to engage in the creative process together with the parents. Adults will be able to suggest how modular figures are assembled correctly.

A figurine of a small swan belongs to an easy craft, the assembly of which does not take much time and pre-assembled blanks. To create a modular origami "little swan", you need to make 70 triangular modules, 69 elements of pink or blue and 1 red for the beak.

Let's look at how to assemble a little swan step by step.

We collect the torso. Base - 3 rows of assembled elements. Each row contains 12 triangular blanks. The resulting strip is connected in a circle. It is necessary to give the resulting part the shape of a bowl.

The first wing - 4 modules are put on. The next rows are in decreasing order: 3 triangles, then 2. The tip of the wing - two elements, worn one on top of the other.

Breast - 2 modules are put on immediately after the winglet. Attached from above with the short side of 1 piece. The breast is ready.

Second wing. Immediately after the breast, the assembly of the second wing begins. Both wings are assembled according to the same scheme: 4 parts, 3 elements on top, then 2 triangles. The wing tip is two rows of one triangle each.

Tail. First row - 2 parts. One more workpiece is attached on top.

Neck, beak. For the neck, we connect 5 elements vertically, the 6th row ends with a red triangle - the beak. Gently give the neck a slight curve.

Connect the neck to the last breast module that was assembled with the short side.

Assembling such a small figure will not take more than 10 minutes. You can create a whole family of beautiful birds. To make it easier for the child to hold the modules in his hand, the details can be made big size... A kid can make such a craft as a gift to his grandmother or mother. The size of the small swan can be changed by adding more blanks.

Simple model

After you have mastered the process of assembling a small craft, you can start working on a more voluminous and complex figure.

To create one model, you will need 458 multi-colored modules and 1 red triangle for the beak. Lovers of classic models choose black or white colors for crafts.

Consider step by step creation modular origami swan from prepared elements. The presented model refers to the average level of complexity, requires accuracy and care.

• A strip is assembled from 30 blanks, which is connected in a circle.
• We make 4 more circles in the same way.
• The resulting part must be carefully turned out. Make sure that the modules do not fall out and the workpiece does not fall apart. The result is a shape that resembles a bowl. 2 more rows are attached to the top of the bowl.
• On the 8th row, the process of forming the wings begins. For the wings, attach 12 blanks, skip 2 parts. The neck of the craft will be attached at the place of the pass. After missing triangles, attach 12 pieces again. The remaining free area is a place for the tail formation.
• The wings are performed as follows. Starting from row 9, in each subsequent row, the number of paper modules decreases by 1. The wing is considered complete when 1 triangle remains.
• In the same way, reducing each row by 1 piece, a tail is made.
• The neck is made separately from 19 elements and 1 red triangle for the beak. The corners of one part are inserted into the pockets of the other. Completes the red triangle. The resulting part must be given a slight bend, similar to the position of the swan's neck.
• In the place left between the wings, attach the neck of the craft. It turned out a paper swan using the modular origami technique.

The main element of this craft is a bowl-shaped body. This technique is used to create other figurines: vases, dragons, animal models and fairy-tale characters. Taking the swan scheme as a basis, you can create a voluminous heart.

Having studied the assembly scheme of a modular origami swan, a beginner is already able to come up with and implement his creative idea.

Many experienced craftsmen improve this type of crafts, creatively rethink the approach to the classic assembly of the model. So, in modular origami a swan (the master class presents extraordinary models on the Internet), for example, the figurine is made in blue tones with an unusual wing shape.

Such unusual craft can be made in the colors of the country's flag.

Origami double swan

This type of craft is more complex. However, the double swan looks brighter, the figure turns out to be more voluminous. This is due to the fact that the model is assembled according to the principle of a nesting doll. One figurine contains several smaller ones.

Before you start creating such a masterpiece, prepare 1502 elements. To emphasize the unusual shape, add colored triangles. Then you will need:

• Colored blanks - 180 pcs.
• White - 1322 pcs.

Part one

It will take 770 modules to assemble it.

• For the base, we collect and connect 2 rows of 30 parts in a circle.
• Add 2 more rows. We turn out the neatly obtained part. It turns out a figurine that looks like a bowl. We make 10 more lines on top. While working on a figure, constantly correct it. Slim down the look.
• We collect 15 rows in a similar way.
• On the 16th line, we outline the places where the neck, wings, tail will be formed. You will need:
• Neck - 6 elements.
• Wings - 10 pieces for each wing.
• Tail - 4 elements.

We make the neck according to the following scheme:

• 6 modules: 1 pink, 4 white, 1 pink triangle.
• Each subsequent line decreases by 1 part until 2 triangles remain. The neck is ready.

We collect the tail opposite the neck. The tail begins to gather from 4 pink elements and remove one from each line until 1 piece remains.

After completing the assembly of the tail, move on to the wings. The construction of the left and right wings is the same.

• First row: 1 pink triangle, 8 white ones and 1 pink detail closes the wing.
• Second row: the last module from the side of the tail is put on the inside of the corner.
• The wings go up 10 rows, each line has 10 elements. To control the height of the wings, they must be collected at the same time.
• Starting from row 11, the wing elements are reduced by 1 piece. in each subsequent row. The decrease goes among the white details. The pink border remains in place.
• The wing is complete when 1 pink triangle remains.

So, the main part of the double swan is assembled. To prevent the created structure from falling and crumbling, make a stand of two rows. Strengthen the blanks of the stand for the stability of the craft with glue.

Part two - inner wings

The base of the second part is made similarly to the first figure. Only 20 elements are collected in a circle. After 2 assembled rows, turn out the craft blank and add 5 more lines. Be sure to stretch the figurine.

Each wing consists of 10 parts: 8 white ones in the center, 1 pink module at the edges. Each wing rises 3 strips.

Starting from the 4th row, the white elements are reduced by 1 piece. with each row until the pink triangle completes the wing line.

Part three

The beginning of the third part is similar to the two previous details of the swan figure. There are 12 triangles at the base alone. The figure rises by 6 rows and turns inside out. In the last line, 2 pink details are put on.

From row 7, reduce each row by 1 white triangle. The last part is ready.

The three assembled parts must be carefully and carefully inserted into one another.

Parts can go in tight, cling. Slowly, unhurriedly, move the base of the wider figure apart. After all the details of the future craft are collected, start working on the neck.

Neck

Space was left for the neck for 6 modules, but it is better to assemble it from 4 or 3 pieces in width. The length of the neck depends on the wishes of the master. To prevent the parts from falling apart during bending of a long workpiece, it is recommended to put them on glue. A red beak ends the neck. You can optionally glue the drawn eyes or make them from buttons.

The craft itself can be decorated with a chain, a bow or a string of jewelry. Such a figure is and beautiful decoration interior, and original gift made with your own hands.

"The Swan Princess"

One of the most beautiful volumetric figures is the modular origami Swan Princess. It is in the creation of fairy-tale characters that the masters and lovers of this type of creativity give free rein to their unrestrained imagination.

The source of inspiration is the princess from the fairy tale of the same name. There are as many models as there are masters, depicting a fairy-tale heroine. Someone creates a princess figurine, however, most like the creation of a fairy swan.

Quite a lot of step-by-step methods of creating this craft are presented. For the basis, you can take classic model, add grace to the craft by making a longer and curved neck, decorate the head of the figurine with a crown.

Prepare the following modules:

• Green - 166 pcs.
• White - 615 pcs.
• Blue - 680 pcs.
• Yellow - 335 pcs.

Start working on this model by creating a tail. There are 30 parts in the base. The colors of the triangles can be combined as you wish or made according to the scheme.

After the blue petals have been collected, detail reduction begins from the top point of such a petal. 1 element is removed from each side of the leaf.

For a lush tail, you need to collect 1 large feather and 8 small feathers.

Small feathers are made in two colors, 4 pieces each:

• Vertically connect 5 elements, alternating 2 colors.
• Put 2 green triangles on 2 corners.
• In the center there are 2 yellow modules, and 1 green modules on the edges.
• Next line: green, yellow, green, yellow, green.
• Green, 2 yellow, green. The extreme parts are put on the inside of the lower module.
• The following lines are made to decrease in a similar way.
• The same feathers are made in a different color.

A large feather is assembled from two small ones, located vertically one above the other.

The feathers are neatly attached to the tail. In order not to fall, it is recommended to put them on glue.

Assembling the torso

The base consists of 36 elements. 11 lines are going in a circle of blue color... From the 12th line, the breast of the craft begins to form. Colors are collected from 2 stripes. The center of the wings is highlighted in yellow, the breasts in green, framed by white triangles.

On line 12-1, a breast is formed in the center: 1 piece is removed from each row.

Neck

Alternate elements in a line of 2 and 3 pieces. Height - 25 strips.

For the wings, 7 parts are used from different sides, opposite each other. For each line, 1 element is also removed.

The tail is collected in front of the breast. To create a ponytail, 11 elements are used, the number of which decreases with each strip.

The stand is made of two circles of 39 modules each.

It is better to attach the finished craft with glue to the stand so that you can move and turn without fear that it will crumble. Figures can be of different sizes - from a few centimeters in height to one and a half meters or more. Large and tall crafts necessarily require additional strengthening of the composition.

Origami is one of the fun creative activities that does not require a lot of tools and materials. As a result, it is low-cost. All you need to create paper masterpieces is to be careful and patient. Today we will learn how to make origami a swan in two ways: simple model using one sheet of paper and modular origami.

Materials and tools

As already mentioned at the very beginning, origami does not require the preparation of special materials for creativity, all we need is:

• paper (standard A4 paper is perfect - it folds easily and holds its shape);
• scissors;
• skillful hands and a little patience.

We will prepare the workplace to make it easier to create. You can start.

For mastering the origami technique, a paper swan is best suited. Probably everyone who is fond of this type of creativity started with just such a swan. And not in vain, because despite the simplicity of execution, the swan looks very cute.

I offer you a simple photo instruction on how to make a swan using the origami technique:

1. We take a square sheet of paper (you can take ready-made stickers that are sold in any stationery store) and fold it diagonally.
2. We straighten the sheet, then to the drawn diagonal, fold the edges to make a corner.
3. Turn over and repeat the procedure, the corner becomes sharper.
4. Divide in half by connecting the top and bottom corners.
5. We make the head of the swan, bending a smaller angle.
6. We bend the workpiece in half.
7. Move the part of the paper, which is the head of the swan, as shown in the photo.
8. We straighten the folds so that the swan can be in an upright position.
9. Our swan is ready.

Our warm-up has come to an end, now let's get down to a more difficult task. The next step is to create a modular origami.

The swan in this design looks just great. At first glance, the design seems very complicated, but soon you will find out how easy it is to create beautiful models using the origami technique. It is enough just to get acquainted with step by step models.

There are many options for how to make a paper swan. Origami allows you to give products new lines using imagination and certain skills.

We make modules

The main thing to learn is to compose a module (the parts that make up the whole structure).

It is done as follows:

1. To obtain pieces of paper of the desired size, divide a standard A4 sheet into 16 equal parts.
2. From the blanks, we need to add the modules. The number of components depends on the size of the future model.
3. We put the rectangular blank horizontally and fold it in half.
4. We do the same vertically.
5. Bend the edges to the bend.
6. WITH back side it looks like this.
7. We bend the corners up, leaving a small gap.
8. Raise the edges up, as shown in the photo.
9. Fold the module vertically.
10. In finished form, it looks like this:

It is with the help of such parts that you can assemble a model of any animal or bird, for this you just need to strictly follow the assembly scheme.

Collecting the Swan

We turn to the main part of making crafts - assembling modules into a conceived craft. Consider two options for how to make a swan: from white and colored modules.

First option:

1. We take three modules and connect them, as shown in the photo:

1. We attach the following two modules to the structure:

This design is quite fragile, so you should collect the first three rows without pausing. Otherwise, your structure may fall apart.

1. With the third row, we make the structure more stable:

1. After completing the third row, you should get the following construction:

The first row of this design consists of 30 modules, then ascending.

1. We continue the construction, building the fourth and fifth rows. This is done according to the same principle as the previous ones.

1. We twist the structure slightly, holding it with two fingers, so as not to destroy it:

You should get the following construction:

1. We make the sixth row without changing the sequence of actions.
2. Moving on to the next row, you will mark the position of the neck and tail. We put on 12 modules as usual, then skip two (leaving room for the neck) and put on the next 12 modules. The remaining space between them will be taken by the tail. And 12 modules on both sides give rise to the swan's wings.

1. Starting from the ninth row, each wing will decrease by one element.

1. We continue to shrink the wings until they are crowned with one module:

1. We pass to the tail. It is also done, decreasing by one module with each row.

1. The final stage is drawing up the neck and head. We need 19 white and one red blank. In the red module we glue the corners to get the beak. In order to assemble the neck, we proceed as shown in the picture, inserting the modules into each other:

1. Create a natural curve for the swan neck as you go:

1. It remains only to insert the finished neck into place. The module swan is ready!

The second option repeats the execution of the first, but is made of corners different color... This version of the execution of the swan in the modular origami technique is called "rainbow". To make a rainbow model, we need modules different colors... We will not describe the actions in detail this time, since their order is no different from the above.

Based on the main principles of modeling in this technique, you can build models of different shapes and colors. Combine similar colors, or play with contrast. Models look great in black and white, you can also arrange smooth transition according to the ombre principle - from a light shade to a darker one, or vice versa.

The swan is a beautiful bird, how often do you see crafts made in this shape? What in general can you make an ordinary swan for children? The answer is simple, almost anything. Such crafts adorn many summer cottages, stand in parks, and what aesthetic satisfaction you get by making such a swan out of paper. Moreover, in the case of origami, such work perfectly develops fine motor skills hands.

But you can show your imagination and make such a craft out of almost anything! I think everyone has seen swans from ordinary car tires and you know that a job well done looks very impressive, but rubber is not the only thing that can be used to make a beautiful craft.

So what prevents us from learning the same way? Nothing, now you will learn how to turn improvised material into beautiful birds and you can give a master class on how to make a similar craft of a swan with your own hands to your friends and acquaintances.

Making modular origami

This type of origami is very difficult, it requires diligence and meticulousness. You will have to make many parts out of paper, and then connect them, nesting one into the other, which is why this technique is called modular. However, the result fully justifies all these difficulties. Even the very process of creation fascinates you so much that you will not notice how time has flown by. However, let's get started.

Modules themselves

The first thing you should do is learn how to make modules. To do this, we take the A4 format, cut into thirty-two equal parts rectangular... Made? Great, now we fold each resulting rectangle in half, longitudinally and across.

Now we wrap the edges towards the center, turn the resulting product over. You should have a little space between the corner you wrapped and the triangle.

We collect the craft

To begin with, we need a sufficient number of elements of various colors, but we need the following: 1 red, 136 pink, 90 orange, 60 yellow, 78 green, 39 blue, 36 blue, 19 purple colors.

We proceed directly to needlework, take three pink elements and place the tips of the other two in the pockets of one of them.

Next, we take two more modules of the same color and attach them to the previous formation by analogy, the tips in the pockets. We continue to do this until we get a ring with an outer and inner row, thirty modules each. In fact, first you get a chain, the ends of which you connect with the last module.

The next, third, row we make already of thirty orange elements, which need to be connected in a checkerboard sequence. Similarly, collect the fourth and fifth rows.

The next step, carefully turn the edges of the craft upwards. Next, we take thirty elements and lay out the sixth row, by putting them on top.

And now the crucial moment comes, we make the neck and wings. First, choose where to place the head. We chose, we take two adjacent corners of the elements, here we will make the neck. To the left and right of the head, we form layers of twelve yellow modules. As a result, we get twenty-four elements in the seventh row.

We make the wings by reducing the number of elements in the next row. We reduce it by two, that is, in the eighth row you will have twenty-two modules, in the ninth row already twenty.

The tail is next, it is made by analogy with the wings, only we reduce one module at a time. This part will take twelve green and three blue elements.

The neck is made quite simply, we take one module and insert it into the pockets of another, that's all. It remains only to insert seven violet and 6 elements of blue, cyan, yellow, green colors into the red module. Form the neck and attach it to the body between the wings.

The last thing to do is the base of the bird. It will consist of two rings, in the first thirty-six modules, in the second forty. We connect them by analogy with the neck.

Our beautiful bird is ready, you can put it in your living room or your room. She will delight your eyes for a long time.

Classic origami swan

Next, we will analyze step-by-step instructions on how to make a much simpler and more understandable swan, which can be created from such an improvised material as paper, but from that it will be no less beautiful.

Maybe someone will like it even more than our previous version. All you need is a sheet of paper and a pair of your wonderful hands. Let's not make long prefaces, let's get started.

The first thing you do is take a square piece of paper and fold it well diagonally and unfold it. Next, we bend the sheet on one side so that the corners converge in the middle, as if you are making an airplane. Now you need to slightly bend the corners, which are connected in the center, at an equal distance.

The next step is to turn our craft over and bend it. You should get a kind of triangle, something like an airplane.

We take the nose of the "airplane" and bend it up in a place that cuts off about one third of the nose of our craft. And finally, bend the tip a little to make a beak

Our beautiful bird is ready. The swan is a very complex figure and it may happen that you do not quite understand the manufacturing process. To do this, below we attach a photo instruction for making a swan craft.

Photo of crafts swans

How to make a small swan from modules using the origami technique, you can learn from the materials of our article. It takes a little time and materials to make it. Almost any person who has at hand will be able to cope with the work necessary materials and a simple tool such as scissors or a clerical knife. A small figurine of a swan will be a great decoration on your desktop or addition to a gift for a loved one.

Origami is a very ancient art form that came into the world with light hand Japanese. Various paper figures impressed with their simplicity and, at the same time, beauty and grace. Products made using the modular origami technique have a particularly unique look. Everyone, without exception, likes their expressiveness and realism. For the most part, these are rather large, voluminous products, the manufacture of which takes a lot of time. But there are also small modular figures., not inferior in anything to their large relatives. In our article we will talk about just such small origami. Today you will learn how to make a small swan from modules.

To get started, we need to take paper of three colors - white, red and orange. And, of course, scissors. To begin with, we will prepare modules - individual elements that are the material for building a product. To work, you need twenty-two orange modules. This color is not important, so you can replace it with any other. Also, you need to prepare one hundred thirty modules white and one is red.

Making modules is easy. We will take an A4 sheet, fold it in half. The resulting version is doubled again and again. Then expand the sheet. Cutting it along the folds, we get sixteen modules. To make them smaller in size (ideal for our product), we will double the sheet one more time, which will give us the opportunity to get thirty-two modules.

After these actions, using scissors or a clerical knife, we will cut it into separate pieces (sixteen or thirty-two). Then we proceed according to the proposed scheme below.

As a result, we should have such elements - modules.

Each separate row of a small swan will consist of fifteen modules which we will post as shown in the photo.

We connect them together as follows.

In the process, we will observe this picture.

We finish working with the second row of the product and move on to the third.

We will perform the third row according to the principle already known to us.

After finishing work on the third row, we will get such a cute pointed figure.

We continue to attach modules in subsequent rows (fourth, fifth, sixth and seventh).

In the next row, we start forming the wings of our little swan. To do this, we will connect the modules in the following order: one orange module, four white modules, and again one orange module.

In the next row we attach in the following order: one module is orange, three modules are white and one is orange.

• one orange module, four white modules, one orange module;
• one module orange, three white, one orange;
• one orange, two white modules, one orange module;
• one orange module, one white module, one orange module;
• two orange modules;
• one orange module.

Let's make the second wing of the swan in the same way.

We get the following result.

Now we need to make the neck. To do this, we will put fifteen white modules on each other and one red one, which will serve as a beak for us.

We attach the neck to the body.

A small swan made using modular origami technique is ready. On request, we can make a whole family of small cute swans.

One of the striking examples of the technique is the swan made of triangular modules. As a result of simple, but rather painstaking work, you can get a beautiful bird. Depending on what color paper you have at your disposal, you can make a white or colored, rainbow swan from modules.

Looking at the photographs of ready-made figures, it is even theoretically difficult to imagine how to make a swan from modules - it seems very difficult and intricate. In fact, there is nothing difficult in making figures, it is enough just to study in detail the master class on making a swan from modules with an assembly diagram and consistently follow the steps described there.

We bring to your attention a detailed guide, consisting of two stages - the manufacture of components and the assembly of the finished product.

How to make a swan from modules?

First you need to make the modules. To do this, you only need sheets of plain xerox paper, white or colored, depending on what you want to get as a result.

Progress:

1. We bend a sheet of A4 paper in half in width.

   

2. Bend it in half again.

   

3. And bend it in half again.

   

4. Expand and flip so that the fold lines are vertical.

   

5. Fold the sheet in half again, but in a different direction.

   

6. And fold it in half again.

   

7. We unfold and cut or tear the sheet along the fold lines so that we get 32 ​​rectangles.

   

8. We take one of the rectangles and start making the module.

   

9. We bend it in half.

   

10. Now bend across the first fold line.

    

11. Unfold and fold the bottom corners inward towards each other.

    

12. Fold the top corners as shown in the photo.

    

13. Now bend the top down to form a triangle in the end.

    

14. We fold the resulting triangle in half.

    

15. We repeat similar actions with other paper rectangles.

    

16. We got a triangular module with a pocket so that we can insert another into it.

How many modules do you need for a swan?

The number of blanks directly depends on the assembly scheme and the size of the future bird. For example, the assembly diagram below uses 458 white triangles and one red one. By reducing their number and simplifying assembly, you can get a small swan from modules.

Assembling a swan from triangular modules

1. We arrange the three modules in the order shown in the picture.

   

2. We insert the corners of the two upper modules into the pocket of the lower one.

   

3. In the same way, we attach two more triangles to the structure.

   

4. Insert 3 pair of triangles into the outer modules.

   

5. Then we proceed in the same way.
6. Using 30 modules, we get this design.

   

7. We add 3 more rows, in total there should be 5 rows of modules.

   

8. Pressing on the structure in the middle, we turn it inside out.

   

9. We bend the edges up so that the bowl learns, as in the picture.

   

10. Bottom view of the structure.

    

11. By the same principle as before, we put on the 6th and 7th row of modules.

    

12. Starting from row 8, we proceed to the construction of the swan's wings. To do this, we put on 8 next to 12 modules, skip 2 and attach 12 more. In the place where 2 triangles are missing, there will be a neck, in the remaining section of the 7th row there will be a swan's tail.

    

13. In the 9th row, each swan wing is reduced by 1 triangle.
14. We continue further, decreasing the wings by 1 with each row until there is one module left.

    

15. We make a tail, similarly reducing the row by 1 module.

    

16. For the neck and head, we take 19 white and 1 red module in which we glue the corners so that we get a beak.
17. We begin to collect the neck, putting the corners of one module into the pockets of another.

    

18. We bend the structure with a crochet.

    

19. The final step is to insert the neck into the gap between the swan's wings.
20. The swan from paper modules is ready.

You can make other crafts from the modules, for example, a hare or a vase.

Modular origami is a technique of folding paper figures in which not one, but several are used at once paper sheets... In this case, each individual sheet turns into a module, and already a figure is formed from them. Now this 3D origami is widespread not only in China, but also in many Western countries.

Now let's talk about how to make a separate module. Prepare a small rectangular piece of paper for this. We put it upside down.

Bend the rectangle in half lengthwise.

We bend it in half across.

Leave a small gap and turn it over, bend the corners to the middle.

Bend the corners again and fold the triangle. The resulting module has pockets for inserting other modules there:

Modular Origami - Swan Assembly Diagram

We will tell and show you how to make a swan using the modular origami technique. You should end up with something like this:

The swan is the most simple yet effective modular origami figure. In order to make such a beautiful swan, craft 458 white and 1 red modules.

We start assembling from the first two rows. To do this, we will arrange the three modules as follows:

The corners of the two modules must be inserted into the pockets of the third.

We attach the next two modules to the previous ones.

Attach two more triangles in the same way. At this moment, it seems that the structure is so fragile that it crumbles right in the hands of the master. Don't be upset. To fix this, we will construct three rows at once.

To this end, we take one module and put it like this:

We repeat this one more time with another module.

So we form three rows, each of which consists of thirty modules. Form a circle.

Now we take the resulting skirt in our hands and press on its base with our fingers. Gently turn the product inside out.

We get the bowl.

Now you need to carefully fold the edges up, giving the workpiece the following shape.

This is on the side:

This is from the bottom:

We form the sixth row, placing the modules in a checkerboard pattern.

The seventh row begins to form the wings. To do this, we put on 12 triangles, skip 2 corners (corners from neighboring modules) and put on 12 more triangles. In place of the two missing corners, the neck will be modeled, and in the wider area, the tail will be modeled.

In the next row, we must reduce each wing by exactly one module. Side view:

Thus, we reduce each subsequent row by one triangle, until the wing is finally formed and only one single module remains at the top.

This fascinating technique is creating volumetric figures from triangular origami modules - invented in China. The whole figure is assembled from many identical parts (modules). Each module is folded according to the rules of classic origami from one sheet of paper, and then the modules are connected by nesting them into each other. The resulting frictional force prevents the structure from disintegrating. Therefore, you can assemble such a swan without glue (if you are not going to use it as a toy).

To assemble a swan, you will need a lot of modules. Therefore, it is easier to craft it with a large company. Also, this type of creativity is great for teamwork at school. You can experiment with different kinds paper. Suitable for office paper of different colors, coated colored paper... Sometimes such figures are folded from magazine clippings and candy wrappers. School colored paper is poorly suited, since it is too thin, loose, breaks and tears at the folds.

Swan execution order

1. From multi-colored paper rectangles approximately 40 × 60 mm in size, fold the following set of triangular origami modules:

   If you want to make a snow-white swan with a red beak, then take 458 white rectangles and 1 red one.

2. Take the three pink modules and arrange them that way.
   
3. Insert the corners of the first two modules into the two pockets of the third module.
   
4. Take two more modules and join them in the same way to the first group. This is how the first ring is done. It consists of two rows: the inner row, the modules of which are on the short side, and the outer row, the modules of which are on the long side.
   
5. Each row consists of 30 modules. Collect the ring along the chain, holding it with your hands. Close the ends of the chain with the last module.
   
6. Take 30 orange modules and complete the third row. Please note that the modules are put on in a checkerboard pattern.
   
7. Similarly, complete the fourth and fifth rows, which also consist of thirty orange modules.
   
8. Now, grasping the edges of the workpiece with your fingers, perform a movement as if you want to turn the entire ring inside out. You should get this form. From above, it resembles a stadium.
   
9. On the reverse side, the "stadium" will look like this:
   
10. Complete the sixth row, consisting of 30 yellow modules. Now you need to put them on from above. Check that the arrangement of the modules is the same as in the previous rows.
    
11. From the seventh row, start making wings. Choose the side where the swan's head will be. Choose one pair of corners (from two adjacent modules). This will be the attachment point for the neck. To the left and right of this pair, make a row of 12 yellow modules. Those. the seventh row is 24 modules and has two spaces.
    
12. Continue making wings, decreasing each next row by one module. 8 row: 22 green modules (two times 11), 9 row: 20 green modules, 10 row: 18 green modules.
    
13. 11 row: 16 blue modules, 12 row: 14 blue modules.
    
14. Row 13: 12 blue modules, Row 14: 10 blue modules, 15 row: 8 blue modules.
    
15. 16 row: 6 purple modules, 17 row: 4 purple modules, 18 row: 2 purple modules. The wings are ready. Shape them so that they are convex at the bottom and slightly bent at the top.
    
16. Follow the tail, consisting of five rows. Likewise, decrease the modules by one in each row. It will take 12 green and 3 blue modules.
    
17. To make a neck, the workpieces need to be connected in a different way. Insert two corners of one module into two pockets of the other.
    
18. Connect 7 purple to the red module. Try to immediately give the neck the desired curve. If you do not want the swan's beak to be bifurcated, it is better to glue the corners of the red module in advance.
    
19. Then connect 6 blue, 6 blue, 6 green and 6 yellow modules. Give your neck the shape you want.
    
20. Strengthen your neck at the two corners between the wings.
21. If you wish, add details - eyes, a bow.
    
22. Make a stand in the form of two rings, consisting of 36 and 40 modules. Connect the modules in the same way as for the neck.
    
23. If desired, the rings can be glued and the swan can be glued to the stand.