Download patterns for mittens with knitting needles scheme. Mittens with a two-color "waffle" pattern, description. How to knit two-tone mittens with knitting needles for a girl and a boy

Mittens are a very warm, cozy and stylish accessory. Knitted mittens can be afforded by any needlewoman, even a beginner. They are very easy to use and the result will not be long in coming. In order to get a pair of warm and stylish mittens you will need to spend one or a couple of evenings.

In the article below, we will consider knitting mittens with a pattern with knitting needles, schemes, descriptions and photos of various models. The pattern on mittens can be knitted according to the pattern, embroidered, jacquard or sewn on. The elements of the picture can be knitted or welded from wool for felting. There are many options, let's deal with them in order. But first, a little about what yarn is suitable for knitting mittens.

For knitted mittens and gloves, you should choose a not very thick thread. It is good to lie down in the product with a thread 200-250 meters long in a 100 gram skein. You should not take a thicker thread, then there will be difficulties with knitting a finger. If the yarn is thinner than the above, then you can knit in 2 strands.

For mittens with a pattern, you need to take ordinary blended yarn. It is semi-wool with different options composition. A thread in which wool and acrylic are half-and-half will do. For fluffy mittens, you can use alpaca or add a thin thread of mohair or kid mohair to the warp.

As for the knitting needles, mittens are usually knitted on 4 knitting needles. To do this, use a set of 5 double-sided stocking needles. The number of knitting needles can be taken according to the recommendations on the yarn or the peculiarities of knitting. Numbers 2.5 or 3 will be universal for mittens.

The principle of knitting mittens

Mittens can be knitted different ways, consider the most common 4-knitting method. Any mittens can be knitted according to this description, both simple, smooth, and mittens with a pattern, simply relying on the scheme of the selected pattern.

First you need to calculate the number of loops. This is easy to do, you need to tie the sample, measure the girth of the palm and calculate the required number of loops. On average, for a palm girth of 20 centimeters, you need to dial 40 loops. The description is designed for this number of loops, but it is easy to adjust it for your number.

Let's prepare the yarn and knitting needles and proceed:

1. We cast on 40 loops and, knitting the first row with a 1 by 1 elastic band, distribute 10 loops on each knitting needle.
2. We knit in a circle an elastic band 1 by 1 several rows. We make an elastic band 5-7 centimeters or according to the idea.
3. Next, we begin to knit with front loops. Some advise making additions here, but they are not needed, especially if the palm is not wide, since the elastic narrows the canvas, and the front rows make the canvas wider with the same number of loops. Knit several rows (10-12) with front loops until the thumb is formed. In the process of knitting, it is better to try on a mitten on yourself.
4. To form a thumb on the first knitting needle, knit 1 loop and put the next 7 loops on a thread or pin. We collect new 7 loops on the knitting needle and continue knitting in a circle for another 10-15 centimeters until the mitten reaches the height of the little finger.
5. We begin to round off the toe. To do this, we make decreases in each row, knitting together 2 extreme loops from 2 and 3 needles and from 4 and 1 needles until 6 loops remain on the needles. We pull them together with a loop. So we knitted the right mitten. We knit the left one in the same way, only remove the loops for the thumb from the second knitting needle, first knitting 2 loops, then remove 7 loops on the pin, collect new ones and knit the remaining 1 loop.
6. Now we knit the thumb. We transfer the removed loops to the knitting needle and collect 14 more loops in a circle. We distribute all loops on 3 or 4 knitting needles, as convenient. We knit in a circle with face loops of 5 centimeters until the height of the finger reaches the desired length. Next, we knit all the loops in 2, then in the next row again all the remaining loops in 2 and tighten the remaining loops.

The mittens are ready. We hide the ends of the threads and enjoy the result. In order to knit mittens with a pattern of braids or jacquard or openwork, you can use this knitting principle and rely on the pattern of the pattern, knitting it on front side mittens (on 3 and 4 needles). Photos, diagrams and descriptions of knitting mittens with a knitting pattern will be considered further.

Braid pattern mittens

To work on these mittens, take a set of 5 knitting needles and gray yarn with a footage of 250 meters in 100 grams. Cast on the knitting needles the required number of loops (see the diagram) and knit with an elastic band 2 by 2 centimeters 10 or 12.

Such long elastic we do in order to form a fold on the mittens. Then we move on to knitting the pattern.

Berry mittens with patterned insert

For work, you will need a set of 5 stocking needles and berry-colored yarn, semi-wool, measuring 250 m per 100 g.

These stylish mittens are knitted as described above, but a stripe with a pattern on 3 and 4 knitting needles is knitted. The strip must be knitted according to the scheme given below.

First, type the loops on the knitting needles and knit 12 centimeters with an elastic band 2 by 2. Then we go to the front surface with knitting a strip with a pattern according to the scheme.

Set the loops for the thumbs to the right and left of the strip with a pattern for the right and left hands, respectively. We close the toe according to the description given above. We knit the thumb with facial loops, as described above.

Jacquard pattern

Mittens with a jacquard pattern look very stylish and fashionable. It is knitted from threads of two or more colors. They alternate with each other according to the pattern. This type of knitting is already suitable for experienced craftswomen.

The following are interesting and beautiful schemes with jacquard for mittens. It is important to follow the chosen pattern exactly, then the pattern will turn out beautiful and correct. With the help of jacquard, you can knit floral patterns, ornaments, snowflakes, curls and even pictures with animals, birds, insects. The jacquard pattern on the mittens will be good for both adults and children.

Sew-on or embroidered mittens

Mittens with an embroidered or sewn pattern look very beautiful and feminine. For such a pattern, use threads for knitting or floss, beads, beads, fur pom-poms, embroidery or crocheted elements.

An elastic band for mittens can be crocheted or made on a drawstring by knitting the first couple of rows with purl loops, then add several loops evenly and knit with the front stitch, then subtract the added loops and knit a couple of rows with purl and repeat the formation of the drawstring again.

Mittens look interesting, in which the cuffs are knitted with threads of a different color (to match the future embroidered pattern on the mitten itself) and then crocheted with crochet laces. This fold over the cuff is sewn on. After that, the mitten itself is knitted and decorated with embroidery.

Finished products can be decorated with embroidered flowers, knitted titmouses, beads, ties with small thread or fur pom-poms and beads.

1979

Knitted items never go out of fashion, and are especially relevant, for obvious reasons, in the cold season. If you wish, you can personally create a miracle for each family member. This handicraft is available for those who know how to hold knitting needles in their hands and are familiar with the variety of loops. To make the products colorful, use schemes with a description of patterns for knitting mittens with knitting needles.

Mittens can be knitted in different ways:

• crochet;
• traditionally (2 knitting needles);
• using a set of knitting needles.

As a result, they are obtained in one piece or from parts that are sewn together. On five knitting needles, a product is obtained without seams. First, the dialed loops are divided equally into 4 knitting needles, the remaining one will be working. The top and the palm fall on half. If you knit loops on all knitting needles, you get one row. When knitting mittens, patterns designed for 2 knitting needles are often used.

This requires compliance with certain rules:

1. Since this is a circle, then all the loops on the wrong side are knitted the other way around: the face - the wrong side, the wrong side - the face.
2. When knitting with a set of knitting needles, pay attention only to odd rows, which are knitted twice.
3. All even rows are counted from right to left, but they knit the loops the other way around: wrong side - face, face - wrong side.
4. If there is an offset in the pattern both on the face and on the wrong side, then all the odd rows are knitted, as shown in the pattern for traditional knitting.

Knitting mittens with front stitch

Knitting is difficult at first for those who first picked up knitting needles. It is better to improve your skills by knitting simple things: socks, mittens, scarves. These items are essential for humans. Nowadays you can buy them, and if they are tied by the hands of a loved one, it will become a pleasant and necessary gift.

Yarn selection

The yarn for mittens is chosen depending on the weather conditions.

She may be:

• woolen - for severe frosts with winds;
• half-woolen - for variable temperature;
• acrylic - for small children.

Children under one year old are not comfortable in mittens made of wool and semi-wool, because it tends to "bite". Despite the fact that acrylic is a synthetic fiber, it retains heat very well. Knitting threads can be dyed in one or more colors. There is a so-called fancy yarn. It has bumps and lint.

Things knitted from such threads are original and fashionable.

Wool consumption for mittens:

• children - from 50 to 80 g;
• women - 80-100 g;
• male - 100-120 g.

Spoke selection

Knitting needles are the main tool of the knitter. They differ in purpose, in material of manufacture, in thickness. Sweater, jumper, jacket, dress are knitted with paired knitting needles or connected by fishing line (circular). The knitting needles are made from a variety of materials. The knitter picks them up at her discretion.

What you need to pay attention to:

1. Lightness - the hand quickly gets tired from heavy.
2. Thread slip - well-finished products do not cling to the thread, which allows you not to be distracted or nervous during work.
3. End - the knitting needles should not be too sharp so as not to injure your fingers, blunt ends will have difficulty prying the thread.
4. Size - is determined by the size of the spoke diameter and is measured in millimeters. They are selected depending on the thickness of the thread. The knitting density is achieved by the ratio of the thickness of the knitting needles to the yarn. On a skein of threads, the manufacturer indicates the number of knitting needles for knitting with this yarn.

Steel knitting needles are good for fine yarns. They are not long, the surface is slippery, the hand does not get tired of the weight. Aluminum - stains the thread. Therefore, they are only suitable for dark yarns.

For mittens with patterns according to the schemes with the description, knitting needles of different thickness are selected. For example, for tying braids, harnesses, tools of work are needed thicker, and for an openwork pattern - thinner. Experienced craftsmen the elastic is knitted with knitting needles 1 size smaller than the main part.

Required measurements

In order for the mittens to fit and fit perfectly on the hand, the following measurements are necessary:

Stages of circular knitting of monophonic mittens on four knitting needles

With everything you need at hand (knitting needles, yarn, measurements), you can start knitting.

A set of loops and knitting an elastic band

First knit an elastic band. To keep warm, it should fit snugly around the arm and not be short. In children's products, this part is at least 3-4 cm, and adult mittens look beautiful with an elastic band from 7 to 9 cm. If desired, it is knitted longer to make a fold. This will make it look more voluminous. Elastic band - alternation of front and back loops: 1 × 1, 2 × 2. This gives it elasticity.

To determine the number of loops for the elastic, use several methods:

1. You need to knit a sample of 20 stitches. By measuring, they find out how many loops are 1 cm.For example, there are 3 loops per 1 cm, and the width of the wrist is 16 cm. Multiply 16 by 3 and get 48 loops.
2. Wrap around the wrist with a thread for work and increase it 3 times. From the resulting length, loops are recruited.

Knitting tools should have the same number of stitches.

Dial 48 sts. Knit the first row of loops with the face and wrong side. Distribute 12 sts on the needles and connect: tie the remaining tail and knitting thread. This place marks the beginning of a new row. You can mark it with a pin. This is how the serial number of the spoke is accurately determined, this is important for further work.

Stitch knitting technique

Patterns for knitting mittens with knitting needles, schemes with a description of which can be found on the Internet, will seem complicated to novice craftswomen. Therefore, it is optimal for them to start working with a simple one - to knit loops with the front satin stitch.

Knitting the thumb hole

The place for the finger is performed as follows:

1. Determine which spoke the finger will be on: for one hand - on the third, for the other - on the fourth.
2. They knit the first loop, then after 10 p. Thread and tie. Immediately add the missing 10 stitches with a cap, and knit the remaining loop.
3. The same is done when knitting a left mitten on the appropriate tool.

Toe creation

To create a toe, start cutting the loops. On the first and third knitting needles, they are knitted in two pieces at the beginning of the row, on the second and fourth at the end.
Reduce every three rows until 8 sts remain.All loops are pulled together with a thread and hidden on back side.

Knitting the thumb

To tie a finger, they collect loops on a working tool, and the missing ones are added from the edge. They are divided into 3 parts, and the fourth is working.
Knit with the front to the middle of the nail plate, and then begin to subtract 2 loops on each tool until there is nothing left. They are pulled together with a thread, which is fixed on the wrong side.

Knitting mittens with an openwork pattern - description and patterns for beginners

Patterns for mittens with knitting needles, schemes with a description of the craftswomen are collected in a collection, using any opportunity: master classes, educational literature, the possibilities of the Internet. They vary in complexity. A beginner needlewoman will select a suitable pattern for herself to develop knitting skills.

You can start improving your craft by using threads of different colors. Take tangles of different colors. The result is striped mittens. Colors can be bright, contrasting for children's mittens. By using stripes of the same color, but in different shades, a more sophisticated version is obtained.

On the Internet, you can find and use patterns for knitting with a jacquard method. In this case, patterns of various themes are knitted with a thread of a contrasting color. The mittens are tight, as the threads are intertwined on the seamy side, creating an additional layer.

The complexity of openwork patterns is that the work requires a constant counting of the number of loops.

After all, the beauty of the pattern is created by adding them with the help of slip loops and subtracting them by knitting 2, 3 loops together. In this case, the number of loops remains unchanged. One mistake leads to skewing of the product.

Schemes describing patterns for mittens with knitting needles are offered by many sites. When knitting with the front satin stitch is completely mastered, you can proceed to the use of simple patterns. They are knitted after the design of the elastic on the upper side of the mittens, that is, face loops are knitted on the palm.

Pattern number 1. "Pigtails"

A simple braid pattern can be mastered by a beginner:

Pattern number 2. "Royal scythe"

This pattern is more complex than the previous one. Its difference is that the loops are interchanged, first leaving part of the loops in front of work, then behind. It turns out that the pigtail then diverges in different directions, then converges.
In this pattern, only knitted loops. The loops are interchanged after 5 rows. The pattern requires 22 loops.

Pattern number 3. "Openwork hearts"

This pattern is a test of possibilities for a novice craftswoman.

The contour of the hearts is obtained thanks to the holes from the knitted air loops:

1. For one heart, 13 loops are needed if it is a large drawing, and 11 for a small one.
2. Divide the loops equally, knit half, make a loop loop and then two loops together so that their number does not change.
3. In the next row, a crochet loop is knitted from the back.
4. In odd rows, two caps are made, and next to two together.
5. Between them, increase the number of loops to 5.
6. This is done in 3, 5, 7 rows. At 9 p. there will already be three caps and 3 p. two at a time.
7. At 11 p. - four caps, and between them 2 times three together. Then the drawing is repeated.

Pattern number 4. "Stars"

You can use an unpretentious pattern that will decorate children's mittens.

An asterisk is knitted from three loops:

• first three loops together,
• then cap,
• knit these three loops again.

They are staggered depending on the number of loops. Between the asterisks there are loops, knitted in the front way.

Pattern number 5 "Bumps"

The drawing is simple in execution, and represents knitting from one loop 3. Then the canvas is turned and these additional loops are performed on the purl. Bring back the knitting, and cut the loops by knitting them together.
Place the drawing as you wish. It is good for both children's products and youth gloves.

Down mittens

Patterns for mittens with knitting needles, thanks to the many patterns with descriptions, can be selected at will.

V very coldy Mittens made of downy yarn will help protect your hands from the cold. Down products are comfortable, warm, lightweight. To create a downy thread, wool of a special breed of goats is used, which is grown in Russia in three regions: Volgograd, Orenburg and Altai.

A special technology allows you to get a thin and at the same time durable thread, from which craftswomen create things of amazing beauty.

Down properties

The goat down is completely natural. The beneficial effect of downy fiber on the human body has been noticed for a long time. Its healing properties are used in nursing premature babies. To do this, babies are wrapped in downy shawls, which retain heat. Elderly people are saved from sciatica, osteochondrosis and arthrosis with the help of products made of downy yarn.

For colds, alcohol compresses are replaced with a bandage from a downy scarf.

Down products not only keep warm, but also remove excess moisture. In downy mittens, socks, hats, the body will always be dry. The hypoallergenic property of goat down is used in the manufacture of children's clothes. Down mittens have increased wear resistance. Dirt hardly sticks to them. Proper care will allow them to remain in excellent condition for a long time.

The choice of knitting technique from down yarn

Down yarn mittens are knitted with stocking needles (set of five) in a circular manner. The products are warm, soft, lightweight and durable. A thin fluffy thread lies flat, pleasant to work with. The upper part of the mittens is decorated with braids, plaits, and openwork patterns. Openwork fantasies in no way diminish the warmth of the product. Therefore, the possibilities of knitters are endless.

Pattern "Openwork leaves"

The drawing requires 22 loops. The pattern of the pattern is designed for an attentive craftswoman. Counting the number of loops is the key to success.
The pattern is obtained thanks to the holes from the knitting of the cap, made by the front method, and the rearrangement of the two front loops. They diverge to the right and left of the central purl loop.

Bindweed pattern

A drawing consisting of unusual flagella will look good on down mittens. The harness itself is an alternation of loops, knitted with the front and the wrong way. Every 10 rows, crossing occurs on one side to the right, on the other - to the left: first knit the front, then the purl loops.

There are a lot of patterns for knitting mittens with knitting needles. The description diagrams will not be immediately clear. Perseverance and desire will help you overcome difficulties.

Choice of yarn color

Natural downy yarn has different colors: white, gray, black. White thread products are the most spectacular. Modern designers believe that down toilet items go well with fashionable clothes. Set of hat, scarf and mittens white will make the girl irresistible.

Men's mittens

In cold weather, men will not give up warm mittens tied by the hands of their beloved woman. They are irreplaceable during walks in the park, skiing in the forest, on the ice rink.

When creating men's mittens, the same methods are used as when knitting women's and children's products:

• choose the yarn and the desired number of knitting needles;
• make the necessary measurements;
• start knitting with an elastic band, which should not be short;
• knit the main part until the hole for the thumb is made;
• continue knitting until the start of decreasing the loops;
• create a toe;
• knit the thumb.

When choosing the color of the yarn, you need to take into account the preferences of men: black, blue, gray, brown, bottle, khaki. To decorate the top of a warm pair, they use all kinds of embossed patterns: plaits, braids.

Patterns describing patterns for knitting mittens with knitting needles are not always suitable for men's products. You can use the "Pearl" pattern, which represents the alternation of front and back stitches: if in the first row they knit from the front side, then in the next row in its place they knit from the inside out. This is a simple drawing, but it looks decent.

Knitting is one of the ancient types of needlework, but its popularity not only does not fall, but only grows every year. The imagination of knitters knows no bounds. Desire to do related thing special and unique finds understanding among connoisseurs of hand-knitted.

Actual models of children's knitted mittens. Description and schemes of work.

Winter with frost and snow gives a lot of joyful emotions while playing with children. Parents, on the other hand, are worried about maintaining the health, warmth and comfort of their children, in particular about the pens.

Even in the case of a dislike for the child to wear mittens and gloves, needlewomen come up with options for knitted warm products.

The following are used:

• color and texture combinations of yarns
• patterns and ornaments on canvas
• decor with beads, ears, eyes, buttons

About most good options knitted mittens for children and we will talk in the article.

Mittens with braids knitting needles for children 5 - 10 years old: diagram, description

children's mittens and a hat, knitted braid pattern with shadow

Braids on mittens add originality to the product and add warming properties.

For work, choose yarn with wool and knitting needles, the diameter of which is equal to the thickness of the thread.

Before starting knitting:

• take measurements of the child's pens, draw a diagram of the mittens
• tie the elastic and braid pattern
• determine the knitting density
• translate the values ​​of cm into loops

We offer as an example knitting mittens with braids for a teenager:

• cast on 52 loops and complete 20 rows with a 2x2 elastic band,
• in the last row, add 2 loops,
• knit a braid pattern according to the pattern added at the end of the section,
• from the 10th row, add loops for the branch of the thumb - 2x3p, 3x3p, 2x3p. Do all of them with the front ones,
• remove the loops for the thumb on a free knitting needle or pin, add 2 loops and continue knitting the mittens in a circle with a braid pattern,
• at the height of the tip of the little finger, start decreasing the loops at the beginning and end of both parts of the canvas. You should have a triangle for your fingers,
• pull the final 4 loops with a thread, cut it and hide it from the inside,
• return to the auxiliary knitting needle with deferred loops, pick up 2 loops and knit in a circle with the front ones,
• at the height of the beginning of the nail plate of the thumb, divide the canvas into 2 parts and close the loops at the beginning and end of each,
• pull the final 2 loops with a thread, remove its tip to the wrong side,
• do a similar job on knitting a second mitten.

Knitting patterns for mittens and patterns with braids below.

patterns "braids"

knitting pattern for mittens with braids

Mittens owl knitting needles for girls: diagram, description

ready-made mittens with an owl pattern are dressed on the hands of a girl

Warm and interesting mittens with owls on the front side are easy to make even for needlewomen with minimal experience.

Before starting work, complete all the preparatory steps as in the section above.

For mittens with owls, prepare:

• wool yarn
• 5 shawl knitting needles with a diameter, different thickness threads
• auxiliary needle
• hook
• contrasting thread for embroidering eyes and beak in owls

Note:

• for a small child, knit straight fabrics of the palm and thumb,
• the front side of each mitten is a backdrop of purl loops. On it, knit owls with facial ones,
• instead of embroidering eyes and beak, sew on beads that match in color and shape.

The actual knitting pattern for an owl pattern and a pattern for performing in a contrasting color is presented below.

owl knitting pattern with decoding legend

owl pattern on a mitten for embroidery or knitting with jacquard

And also a detailed description of knitting mittens with owls.

description of work on the creation of children's mittens with an owl pattern with knitting needles pattern and description of knitting mittens mittens for children with knitting needles

Warm double knitting mittens for girls and boys from 1 to 10 years old: description

ready-made gray and white double mittens for the child with knitting needles

Warmer models of knitted children's mittens are double. But before you start working on their creation, consider the appearance.

For the baby to dress and wear them with pleasure, mothers-needlewomen choose:

• color combinations of yarn with imitation of cartoon characters
• unusual patterns that resemble animals and birds, such as owl braids
• simple knitting of two mittens of different colors, followed by dressing them one on top of the other in the child's arms

Having determined the knitting density and drawing a pattern of mittens, get to work.

The peculiarity of the double model is the one-piece knitting of the top and lining. That is, first you work on the front mitten, and then on the inner, purl.

• type the loops on the auxiliary thread and insert it in the place to knit the thumb. Then it is convenient to pull it out, and transfer the open loops to the knitting needles and continue knitting,
• knit the inner mitten with the front stitch in a mirror image from the outside. That is, place your thumb on the same side.

Take a description of the work for double mittens for boys, for example, from the picture below. But be sure to continue to either knit the inner elastic mitten, or cast on loops for a new job.

description of knitting mittens for a boy

For double mittens, brighter yarn tones are suitable for girls. And the course of knitting itself is similar to that discussed above in the figure.

Knitted mittens for girls and boys: diagram, description

ready-made knitted mittens for a child with a "cockerel" pattern

Ornaments are a classic in knitting. In this case, you will like mittens:

• for kids - a persistent pattern that does not interfere with bending the handles during games and walks
• mothers - for a flight of imagination in choosing a pattern and the beauty of the finished product

There are as many children's ornamental patterns for mittens as there are mothers-needlewomen. As an example, here are some interesting ones.

children's patterns for mittens and schemes for them, option 1 children's patterns for mittens and schemes for them, option 2

children's patterns for mittens and patterns for them, option 3

Tie your child's mittens with an ornament, focusing on the following job description:

description of knitting children's mittens with an ornament, example 1

description of knitting children's mittens with an ornament, example 2

description of knitting children's mittens with an ornament, example 3

Mittens hedgehogs knitting for babies from grass with a description

gray mittens hedgehogs knitted for a child

Original hedgehog mittens will warm the hands and delight the little ones with their interesting look.

Knitting such a model is not particularly difficult, but requires care and patience.

• You will need 2 types of yarn of a similar shade - regular and weed.
• After taking measurements from the child's pens, drawing a diagram and completing a knitting pattern, start creating mittens.
• Knit them with knitting needles in any way convenient for you without patterns with ordinary front satin stitch.
• From above on the row of transition of the elastic to the front loops on the outside of the mitten, type the loops with weed. Use a hook to lift them. Collect on knitting needles.
• In total, the number of grass loops is equal to 2 knitting needles of the knitted fabric plus 4 for rounding.
• Connect the beginning and end of each front row with the main fabric of the mitten.
• Sew the last row of "needles" with a needle to the finished mitten and cut the thread.
• Crochet the ears. They are semicircular in the hedgehog and slightly elongated upward, located after the end of the prickly hair, and not in it.
• Embroider the nose of the hedgehog with black or pink yarn and add eyes. Ready-made elements made of plastic or crocheted will do.
• For more similarity, sew apple or leaf decorations on top of the grass.

For a detailed description of knitting hedgehog mittens, see below.

a description of the work of knitting hedgehog mittens for children

Mouse mittens with knitting needles for babies made of grass: a diagram with a description

funny pink mice-mittens for girls from the "grass" knitting needles

Fluffy mittens with a mouse muzzle will appeal to kids and preschoolers. The presence of "grass" makes them soft and pleasant for little hands.

Prepare:

• ordinary yarn and "weed" 50 g each, if you plan to knit mittens for a child 3-4 years old
• shawl knitting needles with a thickness equal to the diameter of the thread
• leftover black yarn for spout embroidery
• hook
• black beads for mouse eyes

Operating procedure:

• knit mittens according to the pattern that is most understandable for you,
• after completing the elastic on the product, go to the "grass" and the front surface,
• continue knitting until the beginning of decreasing the loops on the main fabric of the mitten,
• return regular yarn and decrease 4 loops in each row at the beginning and end of 2 gussets, or alternate rows of decreases after one,
• tie your thumb
• repeat the steps to create the second mitten. Be careful when determining the place for the thumb on it,
• the ears of the mouse are rounded and extended upward. Therefore, crochet them from 4-5 air loops and 2 rows of single crochet. Place the top row not over all the columns, but only over the central ones,
• sew on the ears and beaded eyes, embroider the nose with black yarn,
• for more similarity, crochet the mouse's tail from air loops and sew in the first row of grass from the outside of the mitten.

Mittens convertible convertible knitting needles for a girl and a boy: description

blue convertible knitting mittens with convertible top on the boy's arms

Active children sometimes need to reach their fingers while playing or answering the phone. It's so inconvenient to take off the whole mitten and then put it back on. Exit - knit the baby mittens with a soft top with knitting needles.

Outwardly, they resemble mitts with a cap that is attached to the outside of the fingers. Another difference is that they have tied house for the thumb.

For knitting transformer mittens, choose interesting patterns, for example, from braids or volumetric "rice".

The preparatory steps are similar to those discussed in the sections above.

Operating procedure:

• since the base of the mittens is mitts, the beginning and end of the main fabric is an elastic band. Its height is greater at the bottom,
• leave 8-10 loops for the thumb and knit / knit to bend the little finger,
• change the pattern to an elastic band 2x2 and continue working until the beginning of the nail plate on the little finger,
• at the level of the knuckles, lift the loops from the main canvas in the amount of 2 knitting needles and add the same amount minus 4,
• from the inside of the palm of the hand, knit with an elastic band to a height of 1-2 cm, then go to the front surface,
• continue knitting in a circle to the tip of the little finger,
• decrease the loops in the usual way,
• tie the thumb either after completing the convertible top or before starting work on it,
• repeat the steps for the second transformer mitten.

Mittens fingerless knitting needles for a girl and a boy: description

knitted mitts on the boy's hands

Mitts are comfortable with a combination of warmth for the palm and free fingers for games, work, and communication on a smartphone.

For girls and boys, craftswomen knit mitts:

• to the middle of all fingers
• with thumb hole
• solid fabric as a continuation of the sleeves
• openwork, braid patterns, with jacquard motifs

Choose the color of yarn that suits your son / daughter for the rest of your wardrobe and get started.

Below is a description of knitting mitts. Reduce the number of stitches and rows in proportion to the measurements of your child's hands, select other patterns and yarn colors as desired.

description of knitting women's mitts with knitting needles, option 1

description of knitting women's mitts with knitting needles, option 2

How to knit baby mittens with knitting needles?

colored mittens for a newborn with knitting needles

Young parents protect newborn crumbs as much as possible from frosty air. For them, knitting mittens is easy, since the thumb does not need a separate location. That is, all the fingers are placed together.

Mittens for newborns are a kind of warm scratches.

You will need:

• yarn 100% wool or with a maximum content of 50 g
• set of knitting needles for circular knitting
• hook

Operating procedure:

• dial the number of loops in multiples of 4,
• distribute them on 4 knitting needles and knit the first 10 rows with a scarf pattern,
• after 5 rows, alternately knit 2 together and yarn over in a circle. These holes are needed for the lace, with which you will fix each mitten on the handle of the crumbs,
• go to the front surface and after 20 rows, cut the loops to round off the product,
• Pull the final 2 loops with a thread.
• Tie the second mitten in the same way.
• Crochet 2 chains of 30 stitches each.
• Gently thread each of them into the holes in the mittens.
• Sew a cotton liner, if desired.

How to knit two-color mittens with knitting needles for a girl and a boy?

two-tone ready-made baby mittens, knitted

The procedure for knitting mittens with knitting needles from 2 yarn colors is similar to the one-color one. But there are many times more combinations and weaves of yarn.

Needlewomen, depending on their imagination and knitting skills, choose:

• simple alternation of colors, for example, in the form of horizontal stripes,
• jacquard designs, when on the outside the mittens are decorated, for example, with butterflies, deer, snowflakes, snowmen, bullfinches, and on the inside, the colors of the yarn alternate through 1 loop or with vertical stripes,
• embroidery of ready-made mittens with a thread of a different color. At the same time, they imitate knitting a loop, denoting its both lobes with contrasting yarn,
• insert the second yarn only on the elastic band, thumb and the tip of the mittens.

For inspiration, let's insert a few photos of finished works for a boy and a girl.

ready-made two-color children's mittens, example 1

ready-made two-color children's mittens, example 2

ready-made two-color children's mittens, example 3

ready-made two-color children's mittens, example 4

ready-made two-color children's mittens, example 5

ready-made two-color children's mittens, example 6

Mittens minions knitting for a boy 1 - 10 years old

ready-made knitting mittens minions for a boy

Mittens reminiscent of cartoon characters will appeal to the boy, especially in cases of refusal to wear their usual models.

Funny minions, mittens, half the strength to tie a novice needlewoman.

You need:

• yarn in yellow and blue, a little black
• knitting needles and hook
• large eye needle
• ready-made eyes-beads or a little time to crochet them

Features of work:

• mittens consist of the basic colors of the yarn blue and yellow. The first is the elastic and the lower part of the canvas, the second is the upper and thumb,
• insert the black strip before the mittens begin to decrease, at the end of the thumb. And also embroider the top of the finished product, imitating the hair of the minion,
• from the back side on top on a black stripe sew on the eyes and add a smile with black yarn,
• to warm the mittens, knit the lining, continuing to knit ready-made in a mirror order. Then tuck the lining inside each minion.

What pattern to knit white and black children's mittens with knitting needles?

white mittens for a child with braids and rice patterns

Tie white children's mittens with patterns:

• voluminous
• openwork
• braids
• rhombus with rice
• garter stitch
• face stitch

Black mittens hide patterns, so be careful when choosing the latter. Pay attention to:

• purl and front surface
• garter stitch
• combination with white yarn and jacquards
• large braids

Children's mittens chanterelles with knitting needles: a diagram with a description

cute mittens-chanterelles for a child, knitted

Continuing the theme of animals on children's mittens, let us turn your attention to chanterelles. Needlewomen knit them in different ways, trying to please children with a warm and cheerful thing.

We will conditionally divide the techniques of knitting chanterelle mittens into 2 categories:

• simple
• advanced

In the second case, you have separate elements:

• the tail is the thumb
• head with ears and eyes - sewn on top on the back of the mitten
• 2 legs - hanging under the head. Some models do not have them, this is optional.

For a detailed description of knitting chanterelle mittens for children, see below.

description of work on knitting children's chanterelle mittens with knitting needles

Children's mittens with knitting needles with bullfinches: a diagram with a description

lilac mittens with bullfinches for girls knitting

One of the winter birds that stay with us in the cold are bullfinches. Even if your winter is milder, warmer and without them, tie your child's mittens with their portrait.

Needlewomen knit such mittens with needles in 2 ways:

• knitted bullfinches according to the pattern
• create separate parts of the bird's body by crocheting from multi-colored yarn, followed by sewing on to the finished product

The first option is good for mittens for a teenager and older. For a very tiny pen, for example, a 5-year-old toddler, such painstaking work on the pattern can alienate the needlewoman mom due to the duration of knitting.

Therefore, a good alternative is the second option for knitting bullfinches. And the birds are more voluminous in this case.

Tie mittens in any of the ways discussed earlier or in whatever is closer and more understandable to you personally.

For the girl, add openwork holes on the elastic band of the mittens. Pull crocheted laces with fur pom-poms at the ends through them.

In the version of mittens for the boy, follow the drawing of bullfinches with a laconic branch and / or a couple of rowan berries.

The scheme of knitting a drawing of a bullfinch with knitting needles below.

scheme for knitting a pattern of bullfinches with knitting needles for children's mittens, example 1

scheme for knitting a pattern of bullfinches with knitting needles for children's mittens, example 2

For crocheting, such a scheme is suitable.

pattern for knitting elements of a bullfinch crochet for children's mittens

Detailed job description:

description of work on knitting children's mittens with bullfinches

Children's cat mittens with knitting needles: a diagram with a description

funny mittens cats knitting for a child

Before starting work, decide on the appearance of the mittens:

• they will be with a cat pattern
• have an appropriate shape

In the first case, find a drawing that you would like to transfer to the child's mittens.

For example, such:

pattern for knitting cats on mittens for children, option 1

drawing for knitting cats on mittens for children, option 2

pattern for knitting cats on mittens for children, option 3

In the second case, decide on the color scheme of the mittens. For example, you should have a tabby smiling cat. Then knit the mittens with knitting needles, alternating strips of yarn. But make the toe in one color so that you can embroider eyes, nose, mustache and a smile on it. Tie the cat's ears with a second color on both sides of the toe.

Take as a basis any of the above descriptions of knitting mittens for children, just add a picture of cats or give them an appropriate shape.

How to knit baby scratch mittens with knitting needles?

crocheted scythe mittens with a scythe for a newborn

For the smallest crumbs, thumbless scratch mittens are suitable. It is convenient to knit such a fabric even on 2 knitting needles.

We discussed in detail the description of knitting mittens scratches for newborns in the section above.

Note that in addition to the front, purl and garter stitches, braids are also suitable for decorating small mittens.

Children's mittens paws with knitting needles: a diagram with a description

mittens feet in a knitted set for a child

For children - lovers of cats and feline themes in the wardrobe, knit mittens-paws.

You need:

• yarn dark 70 g and white 20 g for the legs
• set of knitting needles
• the rest of the yarn in any contrasting color
• hook
• scissors
• needle with thread in the color of the base yarn
• flexible meter or ruler

Work description:

• take measurements of the child's hand, tie a sample of the canvas with an elastic band and the main pattern, draw a diagram of mittens with the designation of cm and the number of loops,
• type the required number of loops, distribute them on the needles and knit in a circle with an elastic band to a height of 7-8 cm,
• go to the main pattern and, if desired, to the needles of a larger diameter,
• mark the place for the thumb by knitting the loops with contrasting thread,
• at the height of the tip of the little finger, begin to decrease the loops. Since the legs of the cat are more oval than triangular, then knit 2 loops together for the entire row. After a row without subtraction. The next one is again 2 loops together,
• Pull off the rest of the loops with a thread. Hide its end inside the mitten,
• crochet white yarn chains from air loops. Gently roll each in a circle to form the base of the foot and the pads of the toes.
• Either connect the chains into ready-made round canvases, or wind them on ready-made mittens. In the second case, fix each circle on 4 sides with a needle and thread.

Knitting pattern for mittens feet:

burgundy baby mittens with knitting needles

The "bump" pattern is quite voluminous, therefore, for knitting mittens for a child, do not get carried away with it excessively. Bumps on the canvas can prevent the handles from bending.

For example, continue the elastic on the back in the middle of the fabric, then cross the loops into a braid. At the top, add a fan of front loops that end with bumps.

Or tie a wide sleeve area openwork pattern with the addition of bumps. Separate this area on the wrist with a 1x1 or 2x2 elastic band, decreasing part of the loops. Then continue knitting mittens in a way convenient for you.

Mittens for a teenager girl and boy knitting

fashionable mittens knitting for a teenage girl

Mittens for a teenager are a lot like knitting patterns for adults. The estimated number of loops differs slightly as well as the parameters of the palm.

For example, choose an interesting model for mittens for a teenager, taking into account the measurements of his / her hand among the models that we will consider in a future article on knitting men's and women's gloves with knitting needles.

Children's set - hat, scarf, knitting mittens: photos of models

a set of knitted hats, scarves and mittens for a child
knitting kit for a child - hat, scarf, mittens, example 12

Video: how to knit baby mittens minions with knitting needles?

Mittens have always been the most practical and comfortable for cold winters. Today in stores there is a huge selection of mittens for the whole family, but it is much more pleasant to wear things that were created with love with your own hands.

Having learned to knit, you can create whole sets: hat, scarf, mittens. They will harmonize beautifully with each other if they are made in the same style with the same pattern.

I propose to go directly to the discussion of the topic: "how to knit mittens with knitting needles - step by step instructions."

How to knit mittens (step by step for beginners)

In order to learn how to knit beautiful stylish mittens, you need to learn how to knit the simplest, on the basis of which you can create the most original models for the whole family.

Seamless mittens - a master class with a detailed description (photo)

The most interesting thing is that even a lazy one can cope with this model. They can be monochromatic, but the author suggests adding a few red stripes for variety.

Popular articles:

For work we need a woolen thread (70 g), 5 stocking needles No. 3.

The product is knitted from top to bottom on five knitting needles, as a result of which it will turn out without a seam. Calculation of the number of loops: 20 x 1,7 = 34 loops. Distribute 34 stitches on 4 knitting needles. I propose to round and cast on 36 loops, so we get 9.

For ease of explanation, we will give each spoke a serial number. Closing the circle, we knit four loops of the 1st knitting needle together with the end of the yarn remaining on the 4th knitting needle from the set of loops so that the circle around the edge closes more tightly.

The thumb will knit on the 1st knitting needle, for the left - on the 2nd. To do this, we knit on the 1st knitting needle the first loop with a thread of the main color. We knit all other loops, except for the last one, with front colored thread. Then we return the loops, tied with colored thread, to the 1st knitting needle and knit again with the main thread. We get a colored line. This will be the hole for the thumb in the future. Then we just knit up to the little finger (about 8 cm).

Then we proceed to decrease in loops on the toe of the mittens... On the 1st and 3rd knitting needles, at the beginning, we knit the first two loops together with the front one in the second way (behind the back walls), after turning the 1st loop over. On the 2nd and 4th knitting needles, we knit two loops together at the end of the knitting needle with the front one in the first way (behind the front walls). So we decrease the loops through the circle until there is half the number of loops on each knitting needle (in our case, when the number of loops on each knitting needle is odd, we decrease the smaller part through the circle - 4 loops), then we decrease the loops in each circle (5 loops). At the same time, on the 1st and 3rd knitting needles, in those rows where the loops do not subtract the first loops, we also turn over and knit in the first way. When there are 2 loops on each knitting needle, tighten the loops and fasten on the seamy side.

Now let's get down to tying out the thumb... To do this, carefully pull the colored thread out of the thumb hole. Then we insert two knitting needles into the released loops, we get 7 loops on the lower knitting needle, 6 on the upper knitting needle. and the 4th knitting needle will also have 4 loops (3 + 1 from the side edge of the hole). To make it more convenient, the end of the working thread can be lowered into the hole (on seamy side products).

We continue to knit the finger in a circle to the middle of the nail, and then we begin to decrease the loops in the same way as when knitting the mitten toe: on the 1st and 3rd knitting needles at the beginning, on the 2nd and 4th knitting needles at the end, but decreasing do in each row. When there is a 1st loop on each knitting needle, we tighten the loops and fasten on the seamy side.

Left mitten knits similarly to the right, but in a mirror image: we knit the hole for the finger on the 2nd knitting needle.

Step-by-step instructions for knitting on two knitting needles

Such long mittens are also knitted on two needles. You can separately tie two parts with the subsequent connection of the halves, but we will consider an option where you have to make only one inconspicuous seam (this will be correct and visually more beautiful).

Required: yarn, knitting needles, regular and knitting pin, tape measure, hook, needle.

Let's start with the right part.

We measure the girth of the wrist, the length of the palm and thumb. It is also necessary to measure the knitting density by knitting a little. We measure how many loops are there per 1 cm. I have a girth of 20 cm, in 1 cm - 2 loops. Need 40p-4 = set 36p + 2 edging.

We start from the bottom with a 2x2 elastic band (2 front, 2 purl). It turned out about 10 cm (15 rows).

Next, we go to the main canvas, where you can choose the knitting needles of a smaller diameter. In the second row, add 4 loops evenly. Next, we just knit 7 rows to the base of the thumb. You can try on and, if necessary, knit more / less.

The finger in the mitten is not on the side, but as if not much closer to the palm, so for the right mitten we knit as follows.

• A. - edging, 2p. we knit according to the picture and remove it on a regular sewing pin.
• B. - Take 6-7 loops for the finger. Depending on the completeness. We knit 7 loops according to the pattern, and remove all the remaining loops on a pin.
• B. - on the working needle, we only have 7 thumb loops.

We knit in height with the main pattern, without edging !!! the length of the finger is multiplied by 2. My finger is 6cm * 2 = 12cm in height. Came out 21 rows. THE FIRST AND LAST WE TIE ON THE DRAWING !!! We return to the knitting needle the loops from the large pin.

Divide all loops by 2. Remove one part with a pin.

Let's get down to cutting.

We knit the purl row according to the figure. I do not have a needle of 20 loops. I knit like this, edging, 1 front, 2 together, 12 front, 2 together, 1 front, 1 out. A total of 20 loops. Reduce this in each front row until 6-8 loops remain on the knitting needle. I have 7.

We close the hinges and do the same procedure with the second half. In order to finish correctly, simply knit two stitches together, transferring the knitted one to the main knitting needle.

From these lessons, we can conclude that knitting is not so difficult. Knitting mittens requires basic knowledge and some free time.

Knitted mittens with a pattern (diagrams and description)

Learning to knit the most simple models, you can dilute them beautiful patterns, giving free rein to imagination. In the article "" you will find a large number of them.

And now I propose to switch to more complex mittens with knitting needles (diagrams and descriptions will help you understand this difficult matter).

How to knit beautiful mittens with braids for women

Mittens with braids with knitting needles schemes and descriptions for lovers of the classics.

The pigtail will be the main decoration. We chose simple braid, but if you are not afraid of difficulties, you can choose a more complex and original option.

Yarn - acrylic (you can from angora), about 70 g; stocking needles No. 3.5.

Elastic pattern: 2 persons., 2 out.

Knitting of a "braid" pattern: Cross 8 sts to the left (leave 4 sts on the auxiliary knitting needle before work, knit 4 and knit from the auxiliary knitting needle).

Cross 8 loops to the right (leave 4 loops on the auxiliary knitting needle at work, knit 4 and knit the loops from the auxiliary knitting needle).

Cast on 48 stitches and distribute them on the stocking needles, it turns out on each needle 12 loops. Knit an elastic band 3.5 cm with a pattern (if elastic is not enough for you, knit more cm).

Then, we start knitting the main pattern. For the convenience of knitting the "braid" pattern, I transfer the loops from the 1st and 2nd knitting needles to one knitting needle. Those. my loops are distributed over 3 knitting needles (and not 4 knitting needles), on the first knitting needle there are 24 loops of the main pattern, and on the 2nd and 3rd knitting needles from the palm of the hand, 12 loops each.

So, the first row after the elastic begins with a knitting needle on which there are 24 loops, we begin to knit the main pattern.

1-6 row: K1

7th row: 1 person., 2 out., 8 loops cross to the left, 2 out., 8 loops to cross to the right, 2 out., 1 person., Loops on 2 knitting needles from the side of the palm we knit faces. We repeat rows 1-7 throughout the entire work.

At a height of 10 cm from the beginning of knitting (you don't have to have 10 cm, everyone has different hands and fingers), we form a hole for the thumb. Let's start with the left mitten. On the knitting needle from the side of the palm (3rd knitting needle) we knit 4 faces., Remove 6 sts on a pin, dial 6 sts on the knitting needle (so that there are 12 of them, as before), 2 persons.

We knit the hole for the thumb of the right mitten symmetrically, i.e. on the second knitting needle from the side of the palm: 2 persons., 6 sts. we remove on a pin, we type 6 sts., 4 sts. on a knitting needle.

Formation of the toe we carry out after the little finger on the hand is closed.

For a rounded toe, knit two middle stitches together on each knitting needle.

Decrease the loops in each row until only 1 sts remain on the needles (total 4). After that, tear off the thread of the ball and thread it into the needle. Pick up all 4 sts with a needle, pull off and fasten the mittens from the inside out.

After the two mittens are connected, we start knitting the thumb. To do this, remove 6 sts from a pin on a knitting needle, dial 6 sts on a parallel row and dial 4 sts on two side rows. In total, we got 20 sts, we distribute them on 4 knitting needles (5 sts per knitting needle).

And we knit circular rows of faces. to the required finger length. We form the toe of the toe in the same way as the formation of the mitten toe.

Knitting mittens for children

Children love it very much when their mother creates with her own hands, for example, beautiful chanterelles or bears that you can put on handles and go to play snowballs.

Knitted baby mittens with owls

For a child, there is nothing more interesting than patterned mittens. He wears such things with great pleasure, so I propose to please the child with marvelous owls.

Materials and tools:

1 skein;
stocking needles No. 1.5;
additional knitting needle or special removal of loops;
yarn needle;
four beads;
threads and a needle for sewing on beads.
The mittens are knitted in two threads.

So, we collect 32 loops, distribute them to 4 knitting needles (8 on each).
Rows 1 - 10: elastic band 1 persons. x 1 out.
11 row: persons.
12 row: persons.; add 2 persons from broaches. on each spoke
13 - 18 rows: persons.
19 row: we begin to knit an "owl" on 12 loops of the third and fourth knitting needles. The first spoke - persons.; the second spoke - persons.; third knitting needle - 4 persons., 6 out; fourth knitting needle - 6 out., 4 persons.
20 row: the same as the 19th.

21 row: first knitting needle - persons.; second knitting needle - 2 persons., remove 6 loops for the thumb hole on a pin, cast on 6 additional loops, 2 persons; third knitting needle - 4 persons., 2 out., 4 persons .; fourth knitting needle - 4 persons., 2 out., 4 persons.

22, 23 rows: first knitting needle - persons.; the second spoke - persons.; third knitting needle - 4 persons., 2 out., 4 persons .; fourth knitting needle - 4 persons., 2 out., 4 persons.

24 row: first knitting needle - persons.; the second spoke - persons.; third knitting needle - 4 persons., 2 out., 2 loops remove for additional. knitting needle at work, knit the next two loops of persons., then loops for extra. spoke - persons.; fourth knitting needle - remove two loops for extra. knitting needle before work, knit the next two persons., then loops for extra. knitting needle - persons., 2 out., 4 persons.

25 - 31 rows: first knitting needle - persons., Second knitting needle - persons., Third knitting needle - 4 persons., 2 out., 4 persons .; fourth knitting needle - 4 persons., 2 out., 4 persons.
32 row: same as 24th

33 - 35 rows: first knitting needle - persons.; the second spoke - persons.; third knitting needle - 4 persons., 2 out., 4 persons .; fourth knitting needle - 4 persons., 2 out., 4 persons.

36 row: the same as 24th and 32nd.

37 row: first knitting needle - persons.; the second spoke - persons.; third knitting needle - 4 persons., 2 out., 2 persons., 2 out; fourth knitting needle - 2 out., 2 persons., 2 out., 4 persons.

38 - 41 rows: first knitting needle - persons.; the second spoke - persons.; third knitting needle - 4 persons., 6 out; fourth knitting needle - 6 out., 4 persons.

Row 39: start to decrease. First knitting needle - knit the first 2 loops together. behind the back wall; second knitting needle - knit the last 2 loops of the faces. behind the front wall; third knitting needle - knit the first 2 loops together. behind the back wall; fourth knitting needle - knit the last 2 loops of the faces. behind the front wall. Knit the rest of the loops according to the pattern (persons. And out.)

When there are only 8 loops on the knitting needles, pull them together with a needle.For the thumb, transfer the 6 loops removed to the pin onto the knitting needle, dial from the edges onto three knitting needles 2 + 6 + 2 loops.

We knit 12 rows in a circle. Then we transfer all the loops to two knitting needles and begin to decrease: on each knitting needle, we knit the first 2 loops together behind the back wall, the last 2 for the front. We knit the second mitten in the same way - only the hole for the thumb is left not on the second knitting needle, but on the first.

Sew on beads-eyes and rejoice at the wonderful novelty for winter.

Ideas with bullfinches (embroidery)

Having simple mittens at hand, you can decorate them original embroidery, which will look gorgeous in a children's kit.

Video tutorials from the best masters

YouTube today has become a real treasure, where you can find a huge number of training videos. For example, in the blogs of Svetlana Bersanova, you can watch the video tutorial for free. And there are a lot of such good authors. You can find a mentor to your liking and receive the most valuable knowledge absolutely free.

Original mice or white hedgehogs for kids

How to knit mitts

Warm fishnet for a girl (double mohair)

Interesting two-tone minions for a boy 7-8 years old

Jacquard products (video tutorials)

Winter-themed jacquard is a classic that will always be relevant, so I propose to move on to the most difficult options that require maximum time and attention to detail.

Original knitting with an ornament (Norwegian patterns)

For girls with deer

If you want to learn how to knit a complex, but very original "deer" pattern, this tutorial with a detailed description will help you.

Men's mittens with arana for little men

If you learn all the lessons we offer, you will be able to fantasize and create products of any complexity: women's fingerless gloves, with a fold-over top, with a false pattern, from thick yarn and embroidery. Good luck with your endeavors. Try, experiment and spoil your home with nice bundles.

Mittens evoke the warmest associations in every person. Comfortable, practical, beautiful and functional - it's all about mittens. Mittens are worn by children and adults, feeling the most grateful feelings for a carefully warming winter wardrobe item.

Today, stores have many of the most different models, but the most pleasant sensations are given by hand-made things. Classic knitting of mittens with knitting needles is the easiest and quick way learn the intricacies of needlework.

Knitten things- it is always original and original. In addition, you don't have to spend a lot of money on beautiful DIY kits, and the process itself will bring a lot of pleasure.

A warm accessory with an exclusive pattern will become a luxurious highlight of a winter look, useful gift your beloved, as well as loved ones. We offer beginners in the art of knitting several detailed lessons and schemes with a description of how to create luxurious mittens with an ornament.

Knitting lessons

No matter how many couturiers try to change mittens for gloves, knitted mittens still remain a trendy winter wardrobe item. Children, young girls and confident business women are happy to wear mittens, and the strong half of humanity is no exception. Designers in recent times more and more often include such an accessory in their collections, using leather, knitwear, wool or fur to create.

The designer thing is expensive, and the mittens hand made valued for original idea and invaluable manual labor of a skilled craftswoman. Do you want to learn how to knit beautiful mittens with your own hands? We offer some simple and interesting lessons with step by step instructions for beginner needlewomen to knit mittens with patterns. We will use the following abbreviations:

• P - loops;
• LP - facial loops;
• IP - purl loops.

Beginners are offered the simplest schemes with detailed descriptions. All models are original and versatile in their own way.

Even a novice needlewoman can knit simple but comfortable mittens

Seamless mittens

A basic lesson in knitting mittens that even a beginner can handle. The peculiarity of this model is the absence of a characteristic seam. The product requires only 70 grams of wool, as well as five No.3 stocking needles.

Before starting the creative process, you need to determine the knitting density. The optimal figure for this model is 1.7 loops in one centimeter.

Measure the girth of the wrist, the standard measurement for female hands- 20 centimeters. Use 5 knitting needles to make the mittens seamless.

Step by step algorithm:

• We collect loops at the rate of 20 * 1.7 = 34 loops. All 34Ps are distributed over four needles. For the convenience of calculations and multiplicity, dial 36 P, which are distributed nine for each of the 4 knitting needles.
• Number each spoke conventionally. Knit, closing the circle more tightly, 4p 1st knitting needles along with the end of the yarn, which remained on the 4th knitting needle from the set of loops.
• We start knitting with the right mitten. On the 1st and 2nd knitting needles we will count the loops of the lower part of the mitten, on the 3rd and 4th - right. Tie with a pattern-elastic band 1LP * 1IP, cuff height about 7 cm.
• Tie the base in a circle, row by row, to the base of your thumb. The distance is 5-7 cm depending on the size. The finger is knitted on the 1st needle for the right mitten, on the 2nd for the left one.
• When you reach the base, start to decrease the loops on the toe of the mitten. On knitting needles 1 and 3, the first 2Ps are knitted together with 1P for the back walls with a 1P overturn. On knitting needles 2 and 4, we knit in a mirror, that is, for the front walls. Decrease until half the number of loops remains.
• Tie the thumb hole. Insert two knitting needles so that the bottom is 7p, and the top is 6p. Distribute them on the needles and knit in a circle. When you reach the area of ​​the nail, reduce the loops, as in the toe. When 1p remains on the knitting needles, pull them off, fasten from the inside out.
• When the right mitten is ready, knit the left pair in the same way, but mirror-like.

Workshop on knitting mittens in a seamless way (part 1)

Workshop on knitting mittens in a seamless way (part 2)

Workshop on knitting mittens in a seamless way (part 3)

Long mittens on two needles

Stylish model with an elongated cuff will not only warm, but also become an original detail of the image of a winter beauty. Such mittens are knitted on two needles.

There are two ways: the first - two separate parts are knitted, and then stitched, the second - by continuous knitting with one inconspicuous seam.

We offer to knit mittens in the second way. The process is more laborious, but the result will be visually neat. For work, you will need a skein of yarn, knitting needles, a pin, a hook, a needle, a tailor's meter. Instructions:

• Start with the right part. Take measurements, determine the knitting density in 1 centimeter. For the standard size, it turns out 40P-4P = 36P, plus 2 edge loops.
• Tie the cuff with an elastic band according to the 2LP * 2IP principle. There are approximately ten rows for a length of 15 cm.
• For the main needle, use a smaller diameter knitting needle. Add 4Rs evenly, knit to the base of the thumb.

Besides the original appearance, plus such mittens also in the fact that they perfectly warm your hands

Many beginners mistakenly leave room for their thumb on the side. In fact, the branch pipe is knitted closer to the palm, so it will be warmer and more comfortable for the hands.

• We knit 2 loops from the edge, and then remove them on a pin. For a finger, take 6Ps, knit them, remove them on a pin. The 6P of the thumb will remain on the working spoke. Knit in height, multiply the length of the finger by 2, then enter the loops from the pin.
• Tie up to the little finger, move on to the toe. To do this, you need to divide all the loops into 2, remove one part per pin. We begin to cut and knit according to the principle of "edging, 1 loop, then 2 loops together." Cut until there are 6-8 stitches on the needle.
• We close the remaining loops, similarly work on the other side. When the toe is finished, carefully sew up the hole at the base of the mitten.

Knit the left mitten in the same way as the right one, in a mirror image. The master class will certainly appeal to beginners, because knitting or crocheting mittens is a fascinating creative process.

Long mittens knitting workshop (part 1)

Long mittens knitting workshop (part 2)

Long mittens knitting workshop (part 3)

Patterned mittens for children and adults

Patterned mittens are the next level for beginner craftswomen. Ornament is an original detail that turns a familiar winter accessory into a designer item.

To make it easier for needlewomen to embody a creative idea, there are many schemes with a detailed description. We offer an interesting lesson on creating stylish mittens with a classic braid pattern.

To work, you need 70 g of soft yarn, you can take angora or acrylic, as well as stocking needles. Don't forget to take the necessary hand measurements!

Original knitted mittens

Work algorithm:

• We start, as usual, with the right mitten. Tie a standard elastic band 2 faces. * 2 out. Cast on 48 stitches, distribute equally on each of the 4 knitting needles and knit.
• Moving on to the braid pattern.

The basic principle of creating a volumetric braid ornament: 8 loops are crossed to the left. To do this, 4 loops remain on the auxiliary spoke, and the other 4LP. are knitted with an auxiliary knitting needle.

• From 1 to 6 rows, knit according to the formula 1LP, 2IP, 8LP, 2IP, 8LP, 2IP, 1LP. Knit the loops on two knitting needles from the side of the palm.
• We knit the seventh row as follows: 1P, 2IP, 8P cross to the left, then 2IP, 8P cross to the right, 2 IP, 1P. Knit stitches on two knitting needles from the palm of your hand, repeat rows 1 through 7.
• We leave a hole for the thumb. To tie him, 2 persons. Remove 6 loops on a pin, cast on 6 sts on a knitting needle, knit 4 faces.
• We form the toe. To do this, we reduce the loops, knitting together two loops on each knitting needle, rounding the mitten to the base. Sew the small hole of the thumb and toe with the same yarn.

Bella's knitting mittens from the movie Twilight

Warm patterned mittens can be knitted for a child. For babies, choose a soft warm yarn so that it does not "bite" and does not cause allergies. Children especially like mittens tied caring hands mothers or grandmothers. To make a simple accessory turn into interesting fun, decorate mittens with beads, beads or embroidery.

Any of the master classes offered to novice needlewomen is interesting to perform. Knit with pleasure, wear hand made things, it is always relevant, original, warm and beautiful. Finally, we offer several more master classes on knitting interesting mittens

Owl knitting pattern

Another option for knitting mittens with owls